This method is similar to photo synthesis in plants, where they inhale carbon dioxide and release oxygen. DCCV method exhales oxygen in Vitro and the release of oxygen is measured in terms of current (Figure 1). AbstractJaw cancer is detected by Nano amperometric biosensor with surface tension variables in this paper. Amperometric biosensor consists of three terminals namely Working Electrode, Reference Electrode and Counter Electrode. Jaw Cancer is highly dangerous disease seen in India. It is seen in people who smoke; eat Gutka, Khainas and excessive pans. Jaw cancer effects mouth and lungs also. In this paper JAW cancer symptoms, causes, eradication and prevention, drug delivery is discussed. Biosensor with Nano technology detects the jaw cancer with Glucose oxidase in this paper. Electronics and Communication Engineering, Gitam University, Visakhapatnam, AP, India, Tel: 08497917773;E-mail: kalyankillana@gmail.com K. Kalyan BabuDepartment of Electronics and Communication Engineering, Gitam University, Visakhapatnam, AP, India kalyankillana@gmail.com ConstructionGenerally, Biosensors are constructed on glass substrates it is also called as Cell in technological terms. There are three colors which illustrate the internal structure of a biosensor [2]. Green color corresponds to working electrode, red color corresponds to reference electrode and blue color corresponds to counter electrode. The working electrode is made of glassy carbon, reference electrode is made of Ag, AgCl and counter electrode is made of platinum Simple experimental procedureThe working electrode is connected in Bare Glassy carbon and dipped in Ferro ferri solution and it is connected to Elecctro com software. If the output voltage is 0.01V then the biosensor is made ready for detection of pathogenes. Next the biosensor is Pani tested which means Electro Chemical polymerization of Aniline.A.Next the biosensor is dipped in GODx chemical. Glucose oxidase chemical is very costly and very rare to purchase. It takes minimum six months to purchase this chemical. H.If the current decreases, the blood sample analyte is having Cancer pathogen, otherwise no cancer.The above procedure is repeated for all different cancers Nano TechnologyNano Technology refers to 10 exp (-9). Nano materials are Graphene, Nanowires. Graphene is best suited for biological purposes [3]. Graphene Layer is embossed on top most layer of biosensor, for detection of cancer pathogen. Final Construction of CellThe amperometric biosensor which contains 3 electrodes as specified in to above paper rests on Glass Substrate in experimental procedure [4]. But in this simulation paper GaAs MESFETS are used as substrates. So I can use Semi Insulating GaAS substrate and on it the electrodes of Biosensor are resided (Figure 2). Symptoms of Jaw Cancer•Loss of teeth [5] •Lose of taste on tongue 2.The Root cause of jaw cancer is because of undefined cell division of DNA which kills the healthy cells around mouth area and in jaws.3.Another cause of Jaw Cancer is lack of vitamins. 4.The...
Biosensors are invented by Lenard C. Clarke in 1962 to perform experiments on Bio electric potentials. It consists of 3 electrodes namely, Working electrode, Reference electrode and Counter Electrode. Working electrode is made of Glassy carbon and Stainless steel. Reference electrode is made of Silver or Silver chloride; Counter electrode is made of platinum. The substrate is made of glass. The solution that is poured into the biosensor is called Analyte. It is otherwise called Bulk solution. When substrate appears in Bulk Solution, the operation of biosensor takes place. Michaels Manton equations are taken into consideration for illustration of basic working of Biosensor. The basic biosensor contains a Ligand and a transducer. The ligand is biological element in which I used is GODX chemical (Glucose Oxidase), and Transducer is one which converts one form of energy to another form. The output of Transducer is electrical signal. The Viscosity which is Applied Physics Variable is used in detection of Cancer Pathogen. Viscosity [1] is defined as ratio of shear stress to velocity gradient in a fluid. It plays a key role in detection of cancer pathogen in a blood sample. Viscosity variables are simulated in MATLAB software and numerical simulation is performed and from the output graphs, it is found that Viscosity is high for Non-Cancerous cells and low for cancerous samples.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.