The climate changes that are becoming visible today are a challenge for the global research community. The stationary applications sector is one of the most important energy consumers. Harnessing the potential of renewable energy worldwide is currently being considered to find alternatives for obtaining energy by using technologies that offer maximum efficiency and minimum pollution. In this context, new energy generation technologies are needed to both generate low carbon emissions, as well as identifying, planning and implementing the directions for harnessing the potential of renewable energy sources. Hydrogen fuel cell technology represents one of the alternative solutions for future clean energy systems. This article reviews the specific characteristics of hydrogen energy, which recommends it as a clean energy to power stationary applications. The aim of review was to provide an overview of the sustainability elements and the potential of using hydrogen as an alternative energy source for stationary applications, and for identifying the possibilities of increasing the share of hydrogen energy in stationary applications, respectively. As a study method was applied a SWOT analysis, following which a series of strategies that could be adopted in order to increase the degree of use of hydrogen energy as an alternative to the classical energy for stationary applications were recommended. The SWOT analysis conducted in the present study highlights that the implementation of the hydrogen economy depends decisively on the following main factors: legislative framework, energy decision makers, information and interest from the end beneficiaries, potential investors, and existence of specialists in this field.
Since mid 2010, petrol consumption in the transport sector has increased at a higher rate than in other sectors. The transport sector generates 35% of the total CO2 emissions. In this context, strategies have been adopted to use clean energy, with electromobility being the main directive. This paper examines the possibility of charging electric vehicle batteries with clean energy using solar autochthonous renewable resources. An isolated system was designed, dimensioned, and simulated in operation for a charging station for electric vehicles with photovoltaic panels and batteries as their main components. The optimal configuration of the photovoltaic system was complete with improved Hybrid Optimization by Genetic Algorithms (iHOGA) software version 2.4 and we simulated its operation. The solar energy system has to be designed to ensure that the charging station always has enough electricity to supply several electric vehicles throughout all 24 h of the day. The main results were related to the energy, environmental, and economic performance achieved by the system during one year of operation.
In recent years, people have witnessed numerous Internet of Things (IoT)-based attacks with the exponential increase in the number of IoT devices. Alongside this, the means to secure IoT-based applications are maturing slower than our budding dependence on them. Moreover, the vulnerabilities in an IoT system are exploited in chains to penetrate deep into the network and yield more adverse aftereffects. To mitigate these issues, this paper gives unique insights for handling the growing vulnerabilities in common IoT devices and proposes a threat architecture for IoT, addressing threats in the context of a three-layer IoT reference architecture. Furthermore, the vulnerabilities exploited at the several IoT attack surfaces and the challenges they exert are explored. Thereafter, the challenges in quantifying the IoT vulnerabilities with the existing framework are also analyzed. The study also covers a case study on the Intelligent Transportation System, covering road transport and traffic control specifically in terms of threats and vulnerabilities. Another case study on secure energy management in the Smart Grid is also presented. This case study covers the applications of Internet of Vulnerable Things (IoVT) in Smart energy Grid solutions, as there will be tremendous use of IoT in future Smart Grids to save energy and improve overall distribution. The analysis shows that the integration of the proposed architecture in existing applications alarms the developers about the embedded threats in the system.
Nowadays, the evolution of solar energy use has turned into a profound issue because of the implications of many points of view, such as technical, social, economic and environmental that impose major constraints for policy-makers in optimizing solar energy alternatives. The topographical constraints regarding the availability of inexhaustible solar energy is driving field development and highlights the need for increasingly more complex solar power systems. The solar energy is an inexhaustible source of CO2 emission-free energy at a global level. Solar thermal technologies may produce electric power when they are associated with thermal energy storage, and this may be used as a disposable source of limitless energy. Furthermore, it can also be used in industrial processes. Using these high-tech systems in a large area of practice emboldens progress at the performance level. This work compiles the latest literature in order to provide a timely review of the evolution and worldwide implementation of Concentrated Solar Power—CSP—mechanization. The objective of this analysis is to provide thematic documentation as a basis for approaching the concept of a polygeneration solar system and the implementation possibilities. It also aims to highlight the role of the CSP in the current and future world energy system.
As fuel consumption in the transport sector has increased at a faster pace than in other sectors, the use of electromobility represents the main strategy adopted by the automotive industry. In this context, as the number of electrical vehicles (EVs) will increase, it will also be necessary to increase the number of charging stations. The present paper presents a complete solution for charging stations that can be located in the office or mall parking area. This solution includes a mode 3 AC charging stations of International Electrotechnical Commission (IEC) 61851-1 Standard, an EV simulator for testing the good functionality of the charging stations (i.e., communications, residual-current device (RCD) protection) and a software application used for controlling the charging process by the programmable logic controller (PLC).
The Electric Vehicle (EV) as a clean alternative to Classic Vehicle that use fossil fuels is promoted as an immediate solution to improve the quality parameters of the environment related to the transport sector. The transition to clean electrified mobility must be considered from the sustainability spectrum, and the planning of a strategy related to the implementation of electric vehicles implies, from the beginning, providing clean energy conditions to go toward a green-to-green paradigm. It should be noted that the successful implementation of the "green electro mobility" concept depends heavily on the green energy supply solutions of green electric vehicle, so Electric Vehicle Charging Stations (EV-CS) should be powered by electricity generation systems based on green resources. This research article has as main objective the environmental impact assessment from the perspective of CO 2 emissions embedded in green stand-alone energy systems and the estimation of the environmental benefits of their implementation in the power supply of EV-CS from the perspective of avoided CO 2 emissions compared to the classic electricity supply grid. The results indicate that the green energy systems represent feasible solutions for the independent energy support of electric vehicle charging stations, being able to supply electricity based on on-site available 100% alternative energy sources. Related to 1 kWh of electricity, the CO 2 emissions embedded in these systems represent on average 11.40% of the CO 2 emissions of the electricity supplied through the grid at European level and on average 7.10% of the CO 2 emissions of the electricity supplied through the grid worldwide. Results also show that the average price of 1kWh of electricity generated by the analyzed systems is 4.3 times higher than the average unit price of the European Union grid energy, but this indicator must be correlated with the kgCO 2 /kWh cost savings compared to the electricity production from classic power plants. K E Y W O R D S clean energy, CO 2 emissions embedded in system, eco-responsibility of electric vehicle charging station, environmental impact of electric vehicle, green electro mobility, green energy, green-togreen paradigm
This paper aims to present partial results of a large study regarding the alternative energen solutions (sun, wind, hydrogen) for power supply of passive house placed on ClujNapoca, Romania. Five scenarios for different combinations were optimized and analyzed of hybrid energy system. The best energy and environmental performances are achieved by hydrogen technology and fuel cell, also the use of hydrogen energy is more efficient and less expensive then primary renewable energy seasonal storage by batteries.
Masonry units made of clay or Autoclaved Aerated Concrete (AAC) are widely used in constructions from Romania and other countries. Masonry units with superior mechanical and thermal characteristics can improve the energy efficiency of buildings, especially when they are used as the main solutions for building envelope construction. Their production in recent years has increased vertiginously to meet the increased demand. Manufactured with diversified geometries, different mechanical and/or thermal characteristics have a high volume in the mass of the building and a major influence in their carbon footprint. Starting from the current context regarding the target imposed by the long-term strategy of built environment decarbonization, the aim of the paper is to analyze the potential of reusing mining waste in the production of masonry units. Mining waste represents the highest share of waste generated at national level and may represent a valuable resource for the construction industry, facilitating the creation of new jobs and support for economic development. This review presents the interest in integrating mining wastes in masonry unit production and the technical characteristics of the masonry units in which they have been used as raw materials in different percentages. Critical assessment framework using SWOT analysis highlights the key sustainability aspects (technical, environmental, social, economic) providing a comprehensive and systematic analysis of the advantages and disadvantages regarding the integration of mining waste as secondary raw materials into masonry units production.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.