Currently, widely available three-dimensional (3D) printers are very popular with the public. Previous research has shown that these printers can emit ultrafine particles (UFPs) and volatile organic compounds (VOCs). Several studies have examined the emissivity of filaments from 3D printing, except glycol modified polyethylene terephthalate (PETG) and styrene free co-polyester (NGEN) filaments. The aim of this study was to evaluate UFP and VOC emissions when printing using a commonly available 3D printer (ORIGINAL PRUSA i3 MK2 printer) using PETG and NGEN. The concentrations of UFPs were determined via measurements of particle number concentration and size distribution. A thermal analysis was carried out to ascertain whether signs of fiber decomposition would occur at printing temperatures. The total amount of VOCs was determined using a photoionization detector, and qualitatively analyzed via gas chromatography-mass spectrometry. The total particle concentrations were 3.88 × 1010 particles for PETG and 6.01 × 109 particles for NGEN. VOCs at very low concentrations were detected in both filaments, namely ethylbenzene, toluene, and xylene. In addition, styrene was identified in PETG. On the basis of our results, we recommend conducting additional measurements, to more accurately quantify personal exposure to both UFPs and VOCs, focusing on longer exposure as it can be a source of potential cancer risk.
Corrosion is typical of the damage that occurs in ageing pressure vessels and pipelines used in industrial processes as a result of reactive products inside or harsh environmental conditions on the outside. Motivation for this article is to summarize cases, causes, consequences, and prevention in terms of models for the prediction of explosion pressure from BLEVEs. The contribution deals with real scenarios of accidents associated with transport and storage pressurized facilities with corrosive flammable chemicals. While the LPG, propane, and butane BLEVEs are well described in the literature, the information about corrosive and toxic flammable substances are rather scarce. The study presents the results of hazardous zone calculation for the event of ammonia corrosive non-flammable chemical releases. For calculations of the BLEVE overpressure, AICHE ́s Prugh ́s and Baker ́s models together with Effects 9.0.8. Rupture of vessels model were used for this study.
V. (2020). An approach to classifying occupational exposures to endocrine disrupting chemicals by sex hormone function using an expert judgment process.
Background: Nanomaterials are virtually ubiquitous as they are created by both natural processes and human activities. The amount of occupational exposure to unintentionally released nanoparticles can, therefore, be substantial. The aim of the study was to determine the concentrations of incidental nanoparticles that workers can be exposed to during welding operations and to assess related health risks. The specific focus on welding operations was determined based on the fact that other case studies on the manufacturing industry confirm significant exposure to incidental nanoparticles during welding. In the Czech Republic, 92% of all industrial workers are employed in the manufacturing industry, where welding operations are amply represented. Material and Methods:The particle number concentrations of particles in the size range of 20-1000 nm and particle mass concentrations of inhalable and PM 1 fractions were determined via meas ure ments carried out at 15-minute intervals for each welding operation by static sampling in close proximity to the worker. Measurements were obtained using the following instruments: NanoScan SMPS 3910, Optical Particle Sizer OPS 3330, P-TRAK 8525 and DustTrak DRX 8534. The assessed operations were manual arc welding and automatic welding. Results: The observed average particle number concentrations for electric arc welders ranged 84×10 3 -176×10 3 #/cm 3 , for welding machine operators 96×10 3 -147×10 3 #/cm 3 , and for a welding locksmith the obtained average concentration was 179×10 3 #/cm 3 . The determined average mass concentration of PM 1 particles ranged 0.45-1.4 mg/m 3 . Conclusions: Based on the conducted measure ments, it was confirmed that there is a significant number of incidental nanoparticles released during welding operations in the manufacturing industry as a part of production and processing of metal products. The recommended occupational exposure limits for nanoparticle number concentrations were exceeded approximately 4-8 times for all assessed welding operations. The use of local exhaust ventilation in conjunction with personal protective equipment, including FFP2 or FFP3 particle filters, for welding is, therefore, recommended. Med Pr. 2021;72(3)
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.