Currently, it is increasingly difficult to obtain large and quality sawn timber due to the diminishing supply of wood in natural forests. To overcome this problem, innovation is needed to utilize wood scrap waste as a board product. One form of innovation in the use of wood scrap as a board product is laminated boards. In this study, Sengon and Bayur woods were used which had strong grades III-IV and had specific gravity ranging from 0.29-0.70. Bayur and Sengon wood are suitable to be used as raw materials for laminated boards because they have a light density. The purpose of this research was to determine the physical and mechanical characteristics of laminated boards, the effect of Labur weight, wood species and their interactions. The method used in this study is an experimental method with a factorial completely randomized design (CRD). Characteristics of physical and mechanical properties of laminated boards of Sengon and clothes: density 0.412 gram/cm3; water content 12,459%; thick development 2.019%; thick shrinkage 3.183%; MoE 23031,922 kgf/cm²; MoR 357.208 kgf/cm². Laur weight, type of wood and their interactions have a significant effect on all physical and mechanical properties of Sengon and Bayur laminated boards. The interaction of pumpkin weight and wood species had no significant effect on the water content and MoR tests. Based on the wood strength class, Sengon and Bayur wood laminated boards are classified as class III which can be used as protected heavy construction materials.
Penelitian ini mengkombinasikan bahan baku dari kayu sengon dengan non kayu yakni bambu petung menjadi produk laminasi. Sengon memiliki beberapa kelemahan yaitu berat jenisnyanya yang ringan yakni sekitar 0,33 dengan kelas kuat III-IV sehingga tidak layak digunakan sebagai bahan kontruksi karena masuk dalam kelas kuat. Sedangkan bambu petung memiliki karakteristik dasar mirip dengan kayu bahkan dalam beberapa hal bambu petung memiliki keunggulan dibandingkan kayu. Keunggulan bambu petung selain kekuatan mekaniknya yang kuat, bambu ini dapat mudah ditemukan di daerah tropis dan waktu tumbuh yang dominan cepat. Penelitian ini bertujuan untuk mengetahui pengaruh berat labur terhadap sifat laminasi dari kombinasi kayu sengon dengan bambu petung dan mengetahui pengaruh pembuatan laminasi kombinasi kayu sengon bambu petung terhadap peningkatan kelas kuat. Metode yang digunakan dalam penelitian menggunakan metode eksperimen dengan rancangan percobaan yang digunakan Rancangan Acak Lengkap (RAL) non faktorial. Hasil penelitian menunjukkan bahwa nilai rata-rata kerapatan papan laminasi kayu sengon bambu petung yakni 0,50 gr/cm3, dengan kisaran nilai kadar air rata-rata yakni sebesar 13,86% Nilai kadar ini telah memenuhi standar JAS 234:2003 yaitu kurang dari 15%. Terjadi peningkatan kelas kuat menjadi kelas kuat III yang dapat digunakan sebagai bahan kontruksi ringan. Pengujian sifat fisika papan laminasi kayu sengon bambu petung telah memenuhi standar SNI 01-6240-2000 dan JAS SE-7 2003. Physical Properties of Combination Laminated Boards of Sengon Wood and Petung Bamboo (Dendrocalamus asper) Abstract This study combined raw materials from sengon wood with non-wood, namely petung bamboo, to produce laminated products. Sengon has several weaknesses, namely its light specific gravity which is around 0.33 with a strength class III-IV so it is not suitable for use as a construction material because it is included in the strength class. Meanwhile, petung bamboo has basic characteristics similar to wood, even in some ways petung bamboo has advantages over wood. The superiority of petung bamboo besides its strong mechanical strength, this bamboo can be easily found in tropical areas and has a dominantly fast growing time. This study aims to determine the effect of labur weight on the lamination properties of the combination of petung bamboo and sengon wood and to determine the effect of making a combination of petung bamboo sengon wood on the increase in strength class. The method used in this study used an experimental method with an experimental design using a non-factorial Completely Randomized Design (CRD). The results showed that the average density of petung bamboo sengon wood laminated boards was 0.50 gr/cm3, with an average moisture content range of 13.86%. 15%. There was an increase in the strength class to become strong class III which can be used as a lightweight construction material. Testing of the physical properties of petung sengon bamboo wood laminated boards complied with SNI 01-6240-2000 and JAS SE-7 2003 standards.
Keuntungan pembuatan papan laminasi antara lain mampu mereduksi cacat-cacat kayu, efisiensi pemanfaatan bahan baku kayu, memiliki nilai estetika dan mudah dalam perawatan Penelitian ini bertujuan untuk mengetahui apakah terdapat kenaikan kelas kuat setelah kayu sengon dibuat menjadi papan laminasi dengan menguji sifat fisika dan mekanikanya. Metode yang digunakan metode eksperimen; Berat labur perekat tidak berpengaruh nyata pada semua pengujian sifat fisika dan mekanika papan laminasi kayu sengon kecuali pada pengujian kadar air dan kerapatan. Semua nilai pengujian sifat fisika papan laminasi kayu sengon telah memenuhi standar SNI 03-2105-2006 dan JAS 234-2007 (JSA 2007) kecuali pada pengujian penyusutan tebal. Sifat mekanika tidak memenuhi standar JAS 234-2007. Berdasarkan nilai berat jenis, MoE dan MoR maka papan laminasi kayu sengon masuk dalam kelas kuat IV. Berdasarkan hal tersebut maka dapat disimpulkan bahwa kayu sengon tidak mengalami peningkatan kekuatan kayu setelah dibuat papan laminasi sehingga hanya dapat digunakan untuk konstruksi bangunan ringan, kerajinan dan meubel.
Pertumbuhan jumlah Rumah Pemotongan Ayam (RPA) kurang diiringi dengan pengelolaan limbah cair yang baik. Penelitian ini bertujuan untuk mengetahui efek dosis larutan natrium hipoklorit (NaOCl) dan waktu endap terhadap kadar BOD, COD, TSS, minyak dan lemak, NH3-N dan pH pada limbah cair RPA. Penelitian ini menggunakan variasi dosis larutan 5.25% NaOCl sebesar 0 ml L-1 , 0.003 ml L-1 , 0.006 ml L-1 , dan 0.009 ml L-1 dan waktu endap 0 menit, 30 menit, 60 menit, dan 90 menit. Pada setiap perlakuan dilakukan uji toksisitas menggunakan ikan nila hitam (Oreochromis niloticus Bleeker) dengan waktu pajan 24 jam, 48 jam, 72 jam dan 96 jam. Penelitian dilakukan dengan pengulangan sebanyak 3 kali. Hasil terbaik dicapai oleh dosis larutan NaOCl 0.009 ml L-1 dan waktu endap 90 menit dengan nilai BOD 106.56 mg L-1 , COD 226.61 mg L-1 , TSS 229 mg L-1 , minyak lemak 62 mg L-1 , NH3-N 0.69 mg L-1 , pH 6.1, dan 53% kematian ikan nila hitam. HOCl yang terbentuk dari reaksi NaOCl dan air mengoksidasi bahan organik dalam limbah sehingga menurunkan kadar pencemarnya. Uji toksisitas ikan nila hitam menunjukkan bahwa limbah RPA bersifat toksik, yang ditunjukkan dari persentase kematian ikan sebesar 100% pada dosis larutan HOCl sebesar 0 ml L-1. Walaupun demikian, penelitian ini belum berhasil membawa parameter uji memenuhi standar baku mutu limbah cair yang ditentukan di dalam Permen LH nomor 5 tahun 2014 tentang Baku Mutu Air Limbah.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.