Blend films of two types (I and II) were prepared by mixing Antheraea mylitta silk fibroin (AMF) and gelatin solution in various blend ratios via the solution casting method. Two different crosslinkers, namely glutaraldehyde and genipin, were used during blend preparation. The structural characteristics and thermal properties of the blend films were examined by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), Thermogravimetric analysis (TGA) and Diffrential scanning calorimetery (DSC). The FTIR spectra showed conformational alterations in type I blend films while type II films attained high ⊎-sheet crystallinity. The XRD diffractograms presented a high degree of crystallinity in type II blend films compared to type I, which showed an almost amorphous structure. Further, thermal and biological studies were conducted on type II films. According to the TGA thermograms, the degradation temperature of the crosslinked blend films shifted compared to pure gelatin and pure AMF films. Partial miscibility of the two components was indicated by DSC thermograms of the blends. The high water uptake capacity of type II blend films was found to imitate hydrogel behaviour. The blend films did not show any toxicity in 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide (MTT) assay and supported L929 fibroblast cell spreading and proliferation. The biodegradation of the blend films was significantly faster than the pure silk film.
Cetyl trimethyl ammonium bromide (CTAB) modified montmorillonite (MMT) clay (CTAB-MT) doped, tasar silk fibroin-polyvinyl alcohol blend-based 3D nanowebs are generated through electrospinning technique. The morphological analysis reveals the formation of interlinked 3D nanoweb-like architecture and high surface roughness through scanning electron microscopy (SEM) and atomic force microscopy, respectively. The existence of CTAB-MT in nanowebs is confirmed by Fourier transform infrared and complete exfoliation of clay in the polymer blend matrix along with the altered crystallinity of samples is indicated in X-ray diffraction. The incorporation of CTAB-MT clay has shown the enhancement of thermal and mechanical properties of nanoweb samples while the water uptake capacity is reduced and enzymatic biodegradability is found to slow down. The samples present excellent biocompatibility with no cytotoxicity in the Alamar blue assay and high attachment as well as spreading of L929 fibroblast cells covering the entire surface as observed in SEM. The CTAB-MT clay has imparted the samples with good antimicrobial activity against E. coli and S. aureus bacterial strains. The aforementioned properties of these CTAB-MT clay doped 3D nanowebs direct toward their suitability as a potential candidate for tissue engineering applications in the biomedical field.
In this study, we have fabricated polyacrylonitrile/montmorillonite (PAN/Mt) nanofibrous nanocomposites with variation in concentration of Mt from 0.25% to 1.00%. The electrospinning process developed PAN/Mt nanofibrous nanocomposites having reduced fiber diameters and high surface roughness as observed in Field emission scanning electron microscopy. The nanocomposite nanofibers were characterized by X‐ray diffraction (XRD) and thermogravimetric analyzer for intercalation and thermal stability respectively. PAN/Mt nanofibrous nanocomposites were tested for their water vapor transmission rate, air permeability, burst strength, and tensile strength. The filtration efficiency of 0.75% PAN/Mt nanofibrous nanocomposite was found to be 98.7% for PM2.5 particles present in air with a pressure drop of 46.8 Pa. The adsorption of copper (II) (Cu (II)) ions using 0.75% PAN/Mt nanofibrous nanocomposites has also been studied. The effect of contact time and initial concentration of adsorbent on the adsorption of Cu (II) ions have been analyzed. It was found that the PAN/Mt nanofibrous membranes follows pseudo‐second‐order kinetic model and Langmuir adsorption isotherm for the adsorption of Cu (II) ions from aqueous solutions. This study suggests the potential implication of PAN/Mt nanofibrous nanocomposites for filtration of PM2.5 and adsorption of metal ions.
In this work, we have studied the influence of blending Antheraea mylitta silk fibroin solution (concentration 10% w/v) with solution of gelatin (concentration 20% w/v) by using 99% pure formic acid as a solvent. Various blends with desired ratios namely G0S10, G8S2, G7S3, G5S5, and G10S0 were prepared and studied for their viscoelastic behavior. The time dependent analysis with respect to change in viscosity which is also termed as constant shear rate viscosity study was performed for all the blend solutions. Behavior of the pure and blend solutions in the applied range of shear rates viz., 0.01-500 s −1 were also studied. Under dynamic rheological tests, amplitude sweep and frequency sweep were executed. In viscosity test results, a decrease in viscosity was observed in blends of gelatin and silk fibroin as compared to pure silk fibroin solution. Shear thinning behavior was observed in all the blend solutions in the applied shear range. Through amplitude sweep analysis of the blend solutions further, frequency sweep study was carried out by applying a definite percent strain. It can be confirmed through these rheological studies by changing the operating parameters like shear rate, angular frequency, and blend ratios, etc., the properties of blend solutions can be tuned according to the desired end use applications such as medical, textile, tissue engineering, and packaging, etc.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.