OBJECTIVE Complications of laser interstitial thermal therapy (LITT) are underreported. The authors discuss how they have modified their technique in the context of technical and treatment-related adverse events. METHODS The Medtronic Visualase system was used in 49 procedures in 46 patients. Between 1 and 3 cooling catheters/laser fiber assemblies were placed, for a total of 62 implanted devices. Devices were placed using frameless stereotaxy (n = 3), frameless stereotaxy with intraoperative MRI (iMRI) (n = 9), iMRI under direct vision (n = 2), MRI alone (n = 1), or frame-based (n = 47) techniques. LITT was performed while monitoring MRI thermometry. Indications included brain tumors (n = 12), radiation necrosis (n = 2), filum terminale ependymoma (n = 1), mesial temporal lobe epilepsy (n = 21), corpus callosotomy for bifrontal epilepsy (n = 3), cavernoma (n = 1), and hypothalamic hamartomas (n = 6). RESULTS Some form of adverse event occurred in 11 (22.4%) of 49 procedures. These included 4 catheter malpositions, 3 intracranial hemorrhages, 3 cases of neurological deficit related to thermal injury, and 1 technical malfunction resulting in an aborted procedure. Of these, direct thermal injury was the only cause of prolonged neurological morbidity and occurred in 3 of 49 procedures. Use of frameless stereotaxy and increased numbers of devices were associated with significantly increased complication rates (p < 0.05). A number of procedural modifications were made to avoid complications, including the use of 1) frame-based catheter placement, a 1.8-mm alignment rod to create a track and titanium skull anchors for long trajectories to improve accuracy; 2) a narrow-gauge instrument for dural puncture and coregistration of contrast MRI with CT angiography to reduce intracranial hemorrhage; 3) general endotracheal anesthesia for posterior-placed skull anchors to reduce the likelihood of damage to the cooling catheter; 4) use of as few probes as possible to reduce complications overall; and 5) dose modification of thermal treatment and use of short (3-mm) diffusing tips to limit treatment when structures to be spared do not have intervening CSF spaces to act as heat sinks. CONCLUSIONS Laser ablation treatment may be used for a variety of neurosurgical procedures for patients with tumors and epilepsy. While catheter placement and thermal treatment may be associated with a range of suboptimal operative and postoperative courses, permanent neurological morbidity is less common. The authors' institutional experience illustrates a number of measures that may be taken to improve outcomes using this important new tool in the neurosurgical arsenal.

Patients with CNS MMGCT relapsing following chemotherapy alone display two distinct patterns of recurrence and outcome; patients relapsing early possess MMGCT elements and have a dismal prognosis, while patients relapsing late do so with pure germinomatous elements and have an excellent outcome. Current cooperative group studies utilizing more localized fields of irradiation should monitor closely the patterns of relapse and outcome; late recurrences with germinomatous elements might be avoided by initial use of low-dose larger field irradiation in select patients.

No abstract

Subepithelial gingival connective tissue grafts are a common surgical procedure performed in periodontal and implant surgery. This versatile procedure has many indications including tooth root coverage, thickening of gingiva, and improvement of the quality of the crestal gingiva. Several techniques have been described for graft harvest from the palate. Reported complications from these techniques include pain, inflammation, bleeding, flap necrosis, and infection in the donor site. We report a previously unpublished complication following subepithelial gingival connective tissue graft from the palate: pseudoaneurysm of the greater palatine vessel.

BACKGROUND The use of frameless stereotactic robotic technology has rapidly expanded since the Food and Drug Administration's approval of the Robotic Surgical Assistant (ROSA) in 2012. Although the use of the ROSA robot has greatly augmented stereotactic placement of intracerebral stereoelectroencephalography (sEEG) for the purposes of epileptogenic focus identification, the preoperative planning stages remain limited to computer software. OBJECTIVE To describe the use of a 3-dimensionally (3D)-printed patient model in the preoperative planning of ROSA-assisted depth electrode placement for epilepsy monitoring in a pediatric patient. METHODS An anatomically accurate 3D model was created and registered in a preoperative rehearsal session using the ROSA platform. After standard software-based electrode trajectory planning, sEEG electrodes were sequentially placed in the 3D model. RESULTS Utilization of the 3D-printed model enabled workflow optimization and increased staff familiarity with the logistics of the robotic technology as it relates to depth electrode placement. The rehearsal maneuvers enabled optimization of patient head positioning as well as identification of physical conflicts between 2 electrodes. This permitted revision of trajectory planning in anticipation of the actual case, thereby improving patient safety and decreasing operative time. CONCLUSION Use of a 3D-printed patient model enhanced presurgical positioning and trajectory planning in the placement of stereotactic sEEG electrodes for epilepsy monitoring in a pediatric patient. The ROSA rehearsal decreased operative time and increased efficiency of electrode placement.

BACKGROUND The use of frameless stereotactic robotic technology has rapidly expanded since the Food and Drug Administration's approval of the Robotic Surgical Assistant (ROSA™) in 2012. Although the safety and accuracy of the ROSA platform has been well-established, the introduction of complex robotic technology into an existing surgical practice poses technical and logistical challenges particular to a given institution. OBJECTIVES To better facilitate the integration of new surgical equipment into the armamentarium of a thriving pediatric neurosurgery practice by describing the use of a three-dimensional (3D)-printed patient model with in situ 3D-printed tumor for presurgical positioning and trajectory optimization in the stereotactic biopsy of a pontine lesion in a pediatric patient. METHODS A 3D model was created with an added silicone mock tumor at the anatomical position of the lesion. In a preoperative rehearsal session, the patient model was pinned and registered using the ROSA platform, and a mock biopsy was performed targeting the in Situ silicone tumor. RESULTS Utilization of the 3D-printed model enabled workflow optimization and increased staff familiarity with the logistics of the robotic technology. Biopsy trajectory successfully reached intralesional tissue on the 3D-printed model. The rehearsal maneuvers decreased operative and intubation time for the patient and improved operative staff familiarity with the robotic setup. CONCLUSION Use of a 3D-printed patient model enhanced presurgical positioning and trajectory planning in the biopsy of a difficult to reach pontine lesion in a pediatric patient. The ROSA rehearsal decreased operative time and increased staff familiarity with a new complex surgical equipment.

BACKGROUND:The ROSA robot (Medtech) has been shown to be a useful instrument in the surgeon's armamentarium for accurate placement of stereotactic electroencephlography depth electrodes. However, it has not yet been used as a navigation tool for lesion resection. Here, we demonstrate a novel adapter that allows the surgeon to use the ROSA robot with the NICO BrainPath for the resection of deep lesions.OBJECTIVE:To demonstrate the utility of an adapter that allows the ROSA robot to be used in conjunction with the NICO BrainPath tube for lesion resection.METHODS:A stainless steel adapter was made based on the specifications of the ROSA pointer instrument. Two 3D printed models were used to undergo a “mock” surgery using the adapter to assess for ease of use and applicability.RESULTS:The adapter allowed for adequate accessibility and visualization of the tumors in both mock cases. In addition, the stability of the ROSA robot and the design of the adapter allowed the surgeon to rest their hands on the instrument without jeopardizing its position.CONCLUSION:The ROSA adapter allowed for accurate navigation and exposure of these lesions, combining the accuracy and stability of the ROSA robot, with the retraction of the BrainPath tube.

No abstract