No abstract

Geobacter spp. can acquire energy by coupling intracellular oxidation of organic matter with extracellular electron transfer to an anode (an electrode poised at a metabolically oxidizing potential), forming a biofilm extending many cell lengths away from the anode surface. It has been proposed that long-range electron transport in such biofilms occurs through a network of bound redox cofactors, thought to involve extracellular matrix c-type cytochromes, as occurs for polymers containing discrete redox moieties. Here, we report measurements of electron transport in actively respiring Geobacter sulfurreducens wild type biofilms using interdigitated microelectrode arrays. Measurements when one electrode is used as an anode and the other electrode is used to monitor redox status of the biofilm 15 μm away indicate the presence of an intrabiofilm redox gradient, in which the concentration of electrons residing within the proposed redox cofactor network is higher farther from the anode surface. The magnitude of the redox gradient seems to correlate with current, which is consistent with electron transport from cells in the biofilm to the anode, where electrons effectively diffuse from areas of high to low concentration, hopping between redox cofactors. Comparison with gate measurements, when one electrode is used as an electron source and the other electrode is used as an electron drain, suggests that there are multiple types of redox cofactors in Geobacter biofilms spanning a range in oxidation potential that can engage in electron transport. The majority of these redox cofactors, however, seem to have oxidation potentials too negative to be involved in electron transport when acetate is the electron source.microbial fuel cell | bioelectrochemical system | microbial electrochemistry | geomicrobiology | multistep electron hopping

A biofilm of Geobacter sulfurreducens will grow on an anode surface and catalyze the generation of an electrical current by oxidizing acetate and utilizing the anode as its metabolic terminal electron acceptor. Here we report qualitative analysis of cyclic voltammetry of anodes modified with biofilms of G. sulfurreducens strains DL1 and KN400 to predict possible rate-limiting steps in current generation. Strain KN400 generates approximately 2 to 8-fold greater current than strain DL1 depending upon the electrode material, enabling comparative electrochemical analysis to study the mechanism of current generation. This analysis is based on our recently reported electrochemical model for biofilm-catalyzed current generation expanded here to a five step model; Step 1 is mass transport of acetate, carbon dioxide and protons into and out of the biofilm, Step 2 is microbial turnover of acetate to carbon dioxide and protons, Step 3 is the non-concerted, 1-electron reduction of 8 equivalents of electron transfer (ET) mediator, Step 4 is extracellular electron transfer (EET) through the biofilm to the electrode surface, and Step 5 is the reversible oxidation of reduced mediator by the electrode. Five idealized voltammetric current vs. potential dependencies (voltammograms) are derived, one for when each step in the model is assumed to limit catalytic current. Comparison to experimental voltammetry of DL1 and KN400 biofilm-modified anodes suggests that for both strains, the microbial oxidation of acetate (Step 2) is fast compared to microbial reduction of ET mediator (Step 3), and either Step 3 or EET through the biofilm (Step 4) limits catalytic current generation. The possible limitation of catalytic current by Step 4 is consistent with proton concentration gradients observed within these biofilms and finite thicknesses achieved by these biofilms. The model presented here has been universally designed for application to biofilms other than G. sulfurreducens and could serve as a platform for future quantitative voltammetric analysis of non-corrosive anode and cathode reactions catalyzed by microorganisms.

No abstract

Harnessing the potential of cells as complex biosensors promises the potential to create sensitive and selective detectors for discrimination of biodefense agents. Here we present toxin detection and suggest discrimination using cells in a multianalyte microphysiometer (MMP) that is capable of simultaneously measuring flux changes in four extracellular analytes (acidification rate, glucose uptake, oxygen uptake, and lactate production) in real-time. Differential short-term cellular responses were observed between botulinum neurotoxin A and ricin toxin with neuroblastoma cells, alamethicin and anthrax protective antigen with RAW macrophages, and cholera toxin, muscarine, 2,4-dinitro-phenol, and NaF with CHO cells. These results and the post exposure dynamics and metabolic recovery observed in each case suggest the usefulness of cell-based detectors to discriminate between specific analytes and classes of compounds in a complex matrix, and furthermore to make metabolic inferences on the cellular effects of the agents. This may be particularly valuable for classifying unknown toxins.

No abstract

We have developed a multiwalled carbon nanotube/dihydropyran (MWCNT/DHP) composite sensor for the electrochemical detection of insulin in a microfluidic device. This sensor has been employed for physiological measurements of secreted insulin from pancreatic islets in a Cytosensor® previously modified to be a multianalyte microphysiometer (MAMP). When compared with other established electrochemical insulin sensors, the MWCNT/DHP composite film sensor presented improved resistance to fluidic shear forces, while achieving enhanced electrode kinetics. In addition, the preparation of the composite film is straightforward and facile with a self-polymerizing monomer, DHP, used to add mechanical stability to the film. The sensor film was able to detect insulin concentrations as low as 1 µM in the MAMP during calibration experiments. The MWCNT/DHP composite sensor has been successfully used for the direct detection of insulin secreted by islets in the microphysiometer.

Multianalyte microphysiometry is a powerful technique for studying cellular metabolic flux in real time. Monitoring several analytes concurrently in a number of individual chambers, however, requires specific instrumentation that is not available commercially in a single, compact, benchtop form at an affordable cost. We developed a multipotentiostat system capable of performing simultaneous amperometric and potentiometric measurements in up to eight individual chambers. The modular design and custom LabVIEW™ control software provide flexibility and allow for expansion and modification to suit different experimental conditions. Superior accuracy is achieved when operating the instrument in a standalone configuration; however, measurements performed in conjunction with a previously developed multianalyte microphysiometer have shown low levels of crosstalk as well. Calibrations and experiments with primary and immortalized cell cultures demonstrate the performance of the instrument and its capabilities.