The article presents results of modelling and analysis of component contamination of the RBMK-1500 reactor Control and Protection System channels' Cooling Circuit (CPSCC) at Ignalina NPP Unit 1. The modelling was performed using a computer code LLWAA-DECOM (Tractebel Energy Engineering, Belgium), taking into consideration CPSCC components characteristics, parameters of the water flowing in the circuits, system work regimes, etc. During the modelling, results on activity of CPSCC components' deposits, nuclide composition of the deposits and dose rates after the final shutdown of the reactor, as well as activity decay of the most contaminated CPSCC components' deposits were obtained. Analysis showed that there is a significant difference in contamination levels between CPSCC components. The rundown header from the channels of the reactor's fast acting scram system is the most contaminated component, and contamination of the least contaminated component is only 0.27% compared to the activity of the most contaminated component. Corrosion nuclides are the nuclides that mostly contribute to contamination of the CPSCC deposits.

This paper presents modelling results on the RBMK-1500 reactor water purification and cooling system (PCS) components contamination at Ignalina NPP Unit 1. The modelling was performed using a computer code LLWAA-DECOM (Tractebel Energy Engineering, Belgium), taking into consideration PCS components characteristics, parameters of the water flowing in circuits, system work regimes, and so forth. During the modelling, results on activity of PCS subsystems and components’ deposits and nuclide composition of deposits at the moment of the final shutdown of the reactor, as well as activity decay of the most contaminated PCS components’ deposits and dose rates after the final shutdown of the reactor, were obtained. Significant difference of contamination levels was revealed among PCS subsystems and subsystems components. The subsystem of nonpurified water is the most contaminated in PCS, and the activity of the least contaminated component in this subsystem is only 1.42% compared to the activity of the most contaminated component. The most contaminated and the least contaminated components of the purified water subsystem comprise 28.33% and 0.86% of activity, respectively, compared to the activity of the most contaminated PCS component.

No abstract

No abstract

The fire hazard analysis methodology and main results of Ignalina Nuclear Power Plant RBMK-1500 type reactor's systems and rooms with safety elements and also rooms adjacent to main rooms and other fire hazardous rooms are presented. In total this concerns about 2100 rooms in the control area of one Unit, where the fire could influence nuclear safety of the power plant. For this purpose the decision-making computerized system FIRE-INPP was developed. It includes modules for recording necessary information, data processing, analysis and assessment on compliance of rooms at Ignalina NPP with national fire safety requirements and international recommendations regarding fire hazard. Screening algorithms and decision-making module are the basis for the decision-making computerized system, that allows to perform unambiguous, reliable and fast fire hazard analysis and give recommendations to ensure fire safety adequacy.