This work studies the optical reflectance of nanoporous gold (NPG) thin films of varying pore volume fraction (PVF) synthesized by chemical dealloying of Ag-Au alloy precursors. The fabricated samples are characterized by scanning electron microscopy, and spectral hemispherical reflectance is measured with an integrating sphere. The effective isotropic optical constants of NPG with varying PVF are modeled for the wavelength range from 0.4 to 1.6 μm using the Bruggeman effective medium theory. As the thickness of the NPG thin films is more than ten times larger than the effective penetration depth, the spectral reflectance is simply modeled with the Fresnel coefficients at the interface of air and semi-infinite NPG with different incident angles and polarizations. Consistent with the modeling results, the optical measurement data shows that the spectral normal reflectance of NPG significantly decreases with larger PVF values in the near-infrared regime. On the other hand, the reflectance increases greatly only within visible range at larger oblique angles for transverse-electric polarized waves compared to transverse-magnetic waves. Moreover, the NPG samples demonstrate good thermal stability from room temperature up to 100 °C with little changes in the temperature-dependent spectral hemispherical reflectance.

A semiconductor emitter can possibly achieve a sharp cutoff wavelength due to its intrinsic bandgap absorption and almost zero sub-bandgap emission without doping. A germanium-wafer-based selective emitter with front-side antireflection and backside metal coating is studied here for thermophotovoltaic (TPV) energy conversion. Optical simulation predicts the spectral emittance above 0.9 in the wavelengths from 1 to 1.85 µm and below 0.2 in the sub-bandgap range with a sharp cutoff around the bandgap, indicating superior spectral selectivity behavior. This is confirmed by excellent agreement with indirectly measured spectral emittance of the fabricated Ge-based selective emitter sample. Furthermore, the TPV efficiency by pairing the Ge-based selective emitter with a GaSb cell is theoretically analyzed at different temperatures. This Letter facilitates the development of the semiconductor-based selective emitters for enhancing TPV performance.

Nanostructured noble metals such as gold exhibit unique size‐dependent plasmonic and optical properties which is an enabling factor for designing nanophotonic devices. However, for its deployment in high temperature applications such as solar thermal energy harvesting and optothermal conversion, it requires understanding of its temperature dependent optical properties. This paper investigates the in situ specular reflectance of nanoporous gold (NPG) thin films in the wavelength range between 400 and 1000 nm at temperatures ranging from 25 to 500 °C via a home‐built fiber‐based optical spectrometer. During heating, the NPG's ligaments coalesce from an initial size of 39 ± 12 nm to a final size of up to 299 ± 114 nm, and its ligament scales with temperature closely matching an Arrhenius dependence. The surface roughness of NPG is empirically correlated to ligament size and temperature to allow for the theoretical prediction of the relative specular reflectance using scattering coefficients and effective medium theory which closely matches the experimental results. These results represent a step forward in using in situ optical spectroscopic methods to monitor the ligament size evolution of NPG thin‐films and to understand its stability and optical properties for applications at elevated temperatures.

No abstract

No abstract