The detailed features of the design of a sampling tube, such as area ratio, inside clearance, cutting edge taper angle, etc., have an important influence on the disturbance caused when a tube sampler is pushed into cohesive soil. Currently, most tube sampler designs have evolved on the basis of empirical design rules, and local good practices, developed for particular soil conditions. The strain path method provides a basis upon which the influence and importance of different features of tube sampler design can be evaluated, and the design of future samplers optimized. This paper examines the use of Baligh's strain path method for the assessment of tube sampling disturbance, and implements the method via a finite-element approach to assess the influence of area ratio, cutting-edge angles and inside clearance, on sample disturbance evaluated on the basis of the strains imposed on the centre-line of a soil sample. Les caractéristiques précises du modèle de tube d'échantillonnage, comme le rapport de section, le jeu interne, l'angle de cône du bord coupant, etc., ont une influence prépondérante sur la perturbation causée par Penfoncement d'un échantillonneur à tubes dans un sol cohérent. A heure actuelle, la plupart des modèles d'échantillonneur à tubes sont conçus a partir de r6gles de calcul empiriques et de pratiques locales adaptées au conditions de terrain particulières. La méthode des courbes de contrainte fournit un moyen permettant d'une part, d'évaluer l'influence et l'importance des diff&entes caractéristiques du modèle d'échantillonneur à tubes et d'autre part, d'optimiser le dimensionnement des futurs échantillonneurs. Ce papier expose utilisation de la méthode des courbes de contrainte de Baligh pour étudier la perturbation de l'échantillonnage tubulaire, et décrit la méthode à é1éments finis mise en oeuvre pour évaluer l'influence du rapport de section, des angles de bord coupant et du jeu interne, sur la perturbation de l'échandllon évaluée en s'appuyant sur les contraintes impos&aucte;es sur l'axe d'un &aucte;chantilIon de sol.
Triaxial stress and strain path tests have been carried out on high-quality Laval and Sherbrooke samples of lightly overconsolidated Bothkennar clay. The specimens were instrumented with local axial and radial strain and mid-plane pore pressure measurement, with precautions being taken to retain the existing pore water chemistry. The test programme imposed shear and volumetric strains of various magnitudes to assess the reduction in strength and stiffness caused by sampling and laboratory reconsolidation procedures. It is concluded that for this clay even very high quality tube samples will suffer a significant loss in mean effective stress, and some loss of structure during sampling, as a result of the imposed undrained shear strain cycle. Re-establishment of the initial effective stress level, by an appropriate stress path, will recover a proportion of the undisturbed undrained compressive strength that depends on the amount of destructuring: stiffness cannot be fully recovered. Reconsolidation procedures risk taking the specimen through the current yield surface, in which case large volumetric strains will occur and be accompanied by significant destructuring and, hence, irrecoverable loss of strength and stiffness. For natural clays, such as Bothkennar clay, the variability of structure within the deposit means that normalization solely with respect to effective stress cannot be used to allow for the disturbance caused by tube sampling, or to recover in situ soil properties. Des essais au triaxial avec chemin de contraintes et déformations ont été faits sur des échantillons Laval et Sherbrooke d'argile de Bothkennar un peu sur-consolidée de haute qualité. Les spécimens ont été instrumentés, les déformations locales axiales et radiales ainsi que la pression interstitielle à mi-plan étant mesurées, des précautions étant prises pour conserver la chimie de l'eau interstitielle existante. Le programme d'essaise impo-sava des déformations de cisaillement et de volume d'ampleurs variées pour établir la réduction de la résistance et de la raideur causée par les procédés d'échantillonnage et de re-consolidation en laboratoire. On a conclus que pour cette argile même des échantillons mince paroi de haute qualité verront une réduction importante de la contrainte effective moyenne et quelque déstructuration pendant l'échantillonnage, comme résultat du cycle de déformation de cisaillement non drainé imposé. Le rétablissement du niveau initial de la contrainte effective, par un chemin de contrainte approprié, permettra de récupérer une proportion de la résistance à la compression non drainée non remaniée dépendant de l'ampleur de déstructuration: la raideur ne peut jamais être pleinement retrouvée. Les procédures de re-consolidation risquent de mener l'échantillon au delà de la surface de fluage courante, au quel cas de grandes déformations de volume prendront place, et seront accompagnées par une déstructuration importante, et, donc, de pertes de résistance et de raideur irréparables. Pour des argiles naturelles telle que l'argile de Bothkennar, la variabilité de la structure au sein de la couche signifie que la normalisation par rapport à la contrainte effective seulement ne peut pas être utilisée pour prendre en compte le remaniement causé par l'échantillonnage au tube, en pour retrouver les propriétés du sol in-situ.
In order to simulate varying degrees of disturbance of soil at the centerline of a tube sampler, triaxial stress and strain path tests have been carried out on normally consolidated and overconsolidated reconstituted London clay specimens. The tests were carried out using an automated system capable of controlling both stresses and deformations imposed on specimens. The specimens were instrumented with local axial and radial strain and mid-plane pore pressure measuring devices. Test results indicate that the most pronounced effects due to imposed tube sampling strains in reconstituted normally consolidated London clay are significant reductions of mean effective stress and undrained small-strain stiffness, which are accompanied by reductions in the excess pore pressure generated during shearing. The higher the magnitudes of tube sampling strains, the greater the change in behavior. In over-consolidated reconstituted London clay, however, laboratory simulation of tube sampling strains together with deviatoric stress relief (i.e., “ideal” sampling) causes little change in effective stress, stiffness, and strength.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.