This paper presents a computational procedure to simulate the time-domain behavior of photoconductive antennas made of semiconductor and metal materials. Physical modeling of semiconductor devices at terahertz regime can be achieved by applying joint electronic and electromagnetic procedures, e.g., solving a coupled system of equations inferred from Poisson's drift-diffusion and Maxwell's equations. A set of discrete equations are derived by applying a combined finite-difference methodology for the previous steady-state and the finite-difference time-domain procedure for the transient regime. The results for the radiated electric field at broadside direction show good agreement with the experimental results previously reported in the literature.

No abstract

The inclusion of thin lossy, material layers, such as carbon based composites, is essential for many practical applications modeling the propagation of electromagnetic energy through composite structures such as those found in vehicles and electronic equipment enclosures. Many existing schemes suffer problems of late time instability, inaccuracy at low frequency, and/or large computational costs. This work presents a novel technique for the modeling of thin-layer lossy materials in FDTD schemes which overcomes the instability problem at low computational cost. For this, a 1D-subgrid is used for the spatial discretization of the thin layer material. To overcome the additional time-step constraint posed by the reduction in the spatial cell size, a Crank-Nicolson time-integration scheme is used locally in the subgridded zone, and hybridized with the usual 3D Yee-FDTD method, which is used for the rest of the computational domain. Several numerical experiments demonstrating the accuracy of this approach are shown and discussed. Results comparing the proposed technique with classical alternatives based on impedance boundary condition approaches are also presented. The new technique is shown to have better accuracy at low frequencies, and late time stability than existing techniques with low computational cost.

No abstract

Abstruct-Cenetic algorithm (CA) are applied to the design of thin-wire antennas for Ground Penetrating Radar (GPR). The broadband characteristics of the antenna are achieved using resistive loading along the wires. In some cases also capacitive loading is considered. The geometries considered are straight thin-wire dipoles. V antennas and a thin-wire bow-tie antenna.lndex Terms-Broadband antennas, Genetic algorithms, Thin-wire antennas.