Specifying the target reliability levels is one of the key issues in the assessment of existing structures. For a majority of existing buildings and infrastructures, the design life has been reached or will be reached in the near future. These structures need to be reassessed in order to verify their safety. Eurocodes provide a general basis primarily intended for the design of new structures, but the basic principles can be used for assessing existing buildings, too. Reliability levels are generally based on both economic optimization and criteria for human safety. In this study, both methods are elaborated for existing structures. It appears that the requirement for the same target reliability for existing and new structures is uneconomical. Further, cost optimization seems to yield rather low reliability levels and human safety criteria often become the critical factor. The study concludes with practical guidelines for establishing reliability indices for existing structures linked to Eurocode principles

No abstract

Design codes and standards rely on generalised target reliability indices. It is unclear, however, whether these indices are applicable to the specific risk-profile of marine structures. In this study, target reliability indices for quay walls were derived from various risk acceptance criteria, such as economic optimisation, individual risk (IR), societal risk (SR), the life quality index (LQI) and the social and environmental repercussion index (SERI). Important stochastic design variables in quay wall design, such as retaining height, soil strength and material properties, are largely time-independent, whereas other design variables are time-dependent. The extent to which a reliability problem is time variant affects the present value of future failure costs and the associated reliability optimum. A method was therefore developed to determine the influence of time-independent variables on the development of failure probability over time. This method can also be used to evaluate target reliability indices of other civil and geotechnical structures. The target reliability indices obtained for quay walls depend on failure consequences and marginal costs of safety investments. The results were used to elaborate the reliability framework of ISO 2394, and associated reliability levels are proposed for various consequence classes. The insights acquired were used to evaluate the acceptable probability of failure for different types of quay walls.

No abstract