A new technique is described for the isochoric heating (i.e., heating at constant volume) of matter to high energy-density plasma states (>10(5) J/g) on a picosecond time scale (10(-12)sec). An intense, collimated, ultrashort-pulse beam of protons--generated by a high-intensity laser pulse--is used to isochorically heat a solid density material to a temperature of several eV. The duration of heating is shorter than the time scale for significant hydrodynamic expansion to occur; hence the material is heated to a solid density warm dense plasma state. Using spherically shaped laser targets, a focused proton beam is produced and used to heat a smaller volume to over 20 eV. The technique described of ultrafast proton heating provides a unique method for creating isochorically heated high-energy density plasma states.
The laminarity of high-current multi-MeV proton beams produced by irradiating thin metallic foils with ultraintense lasers has been measured. For proton energies >10 MeV, the transverse and longitudinal emittance are, respectively, <0.004 mm mrad and <10(-4) eV s, i.e., at least 100-fold and may be as much as 10(4)-fold better than conventional accelerator beams. The fast acceleration being electrostatic from an initially cold surface, only collisions with the accelerating fast electrons appear to limit the beam laminarity. The ion beam source size is measured to be <15 microm (FWHM) for proton energies >10 MeV.
Experimental data [F. N. Beg, Phys. Plasmas 4, 447 (1997)10.1063/1.872103] indicate that for intense short-pulse laser-solid interactions at intensities up to 5 x 10(18) W cm(-2) the hot-electron temperature proportional, variant(Ilambda(2)) (1/3). A fully relativistic analytic model based on energy and momentum conservation laws for the laser interaction with an overdense plasma is presented here. A general formula for the hot-electron temperature is found that closely agrees with the experimental scaling over the relevant intensity range. This scaling is much lower than ponderomotive scaling. Examination of the electron forward displacement compared to the collisionless skin depth shows that electrons experience only a fraction of a laser-light period before being accelerated forward beyond the laser light's penetration region. Inclusion of backscattered light in a modified model indicates that light absorption approaches 80%-90% for intensity >10(19) W cm(-2).
Fusion fast ignition (FI) initiated by a laser-driven particle beam promises a path to high-yield and high-gain for inertial fusion energy. FI can readily leverage the proven capability of inertial confinement fusion (ICF) drivers, such as the National Ignition Facility, to assemble DT fusion fuel at the relevant high densities. FI provides a truly alternate route to ignition, independent of the difficulties with achieving the ignition hot spot in conventional ICF. FI by laser-driven ion beams provides attractive alternatives that sidestep the present difficulties with laser-driven electron-beam FI, while leveraging the extensive recent progress in generating ion beams with high-power density on existing laser facilities. Whichever the ion species, the ignition requirements are similar: delivering a power density ≈1022 W cm−3 (∼10 kJ in ≈20 ps within a volume of linear dimension ≈20 µm), to the DT fuel compressed to ∼400 g cm−3 with areal density ∼2 g cm−2. High-current, laser-driven beams of many ion species are promising candidates to deliver such high-power densities. The reason is that high energy, high-power laser drivers can deliver high-power fluxes that can efficiently make ion beams that are born neutralized in ∼fs–ps timescales, making them immune to the charge and current limits of conventional beams. In summary, we find that there are many possible paths to success with FI based on laser-driven ion beams. Although many ion species could be used for ignition, we concentrate here on either protons or C ions, which are technologically convenient species. We review the work to date on FI design studies with those species. We also review the tremendous recent progress in discovering, characterizing and developing many ion-acceleration mechanisms relevant to FI. We also summarize key recent technological advances and methods underwriting that progress. Based on the design studies and on the increased understanding of the physics of laser-driven ion acceleration, we provide laser and ion-generation laser-target design points based on several distinct ion-acceleration mechanisms.
Metal foil targets were irradiated with 1 mum wavelength (lambda) laser pulses of 5 ps duration and focused intensities (I) of up to 4x10;{19} W cm;{-2}, giving values of both Ilambda;{2} and pulse duration comparable to those required for fast ignition inertial fusion. The divergence of the electrons accelerated into the target was determined from spatially resolved measurements of x-ray K_{alpha} emission and from transverse probing of the plasma formed on the back of the foils. Comparison of the divergence with other published data shows that it increases with Ilambda;{2} and is independent of pulse duration. Two-dimensional particle-in-cell simulations reproduce these results, indicating that it is a fundamental property of the laser-plasma interaction.
The development of ultra-intense lasers has facilitated new studies in laboratory astrophysics and high-density nuclear science, including laser fusion. Such research relies on the efficient generation of enormous numbers of high-energy charged particles. For example, laser-matter interactions at petawatt (10(15) W) power levels can create pulses of MeV electrons with current densities as large as 10(12) A cm(-2). However, the divergence of these particle beams usually reduces the current density to a few times 10(6) A cm(-2) at distances of the order of centimetres from the source. The invention of devices that can direct such intense, pulsed energetic beams will revolutionize their applications. Here we report high-conductivity devices consisting of transient plasmas that increase the energy density of MeV electrons generated in laser-matter interactions by more than one order of magnitude. A plasma fibre created on a hollow-cone target guides and collimates electrons in a manner akin to the control of light by an optical fibre and collimator. Such plasma devices hold promise for applications using high energy-density particles and should trigger growth in charged particle optics.
The evolution of laser-generated MeV, MA electron beams propagating through conductors and insulators has been studied by comparing measurement and modeling of the distribution of MeV protons that are sheath accelerated by the propagated electrons. We find that electron flow through metals is uniform and can be laser imprinted, whereas propagation through insulators induces spatial disruption of the fast electrons. Agreement is found with material dependent modeling.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.