A photonics-based radar with generation and de-chirp processing of broadband linear frequency modulated continuous-wave (LFMCW) signal in optical domain is proposed for high-resolution and real-time inverse synthetic aperture radar (ISAR) imaging. In the proposed system, a broadband LFMCW signal is generated by a photonic frequency quadrupler based on a single integrated electro-optical modulator, and the echoes reflected from the targets are de-chirped to a low frequency signal by a microwave photonic frequency mixer. The proposed radar can operate at a high frequency with a large bandwidth, and thus achieve an ultra-high range resolution for ISAR imaging. Thanks to the wideband photonic de-chirp technique, the radar receiver could apply low-speed analog-to-digital conversion and mature digital signal processing, which makes real-time ISAR imaging possible. A K-band photonics-based radar with an instantaneous bandwidth of 8 GHz (18-26 GHz) is established and its performance for ISAR imaging is experimentally investigated. Results show that a recorded two-dimensional imaging resolution of ~2 cm × ~2 cm is achieved with a sampling rate of 100 MSa/s in the receiver. Besides, fast ISAR imaging with 100 frames per second is verified. The proposed radar is an effective solution to overcome the limitations on operation bandwidth and processing speed of current radar imaging technologies, which may enable applications where high-resolution and real-time radar imaging is required.
The distribution of water in the Moon's interior carries key implications for the origin of the Moon 1 , the crystallisation of the lunar magma ocean 2 , and the duration of lunar volcanism 2 . The Chang'E-5 (CE5) mission returned the youngest mare basalt samples, dated at ca. 2.0 billion years ago 3 , from the northwestern Procellarum KREEP Terrane (PKT), providing a probe into the spatio-temporal evolution of lunar water. Here we report the water abundance and hydrogen isotope composition of apatite and ilmenite-hosted melt inclusions from CE5 basalts, from which we derived a maximum water abundance of 370 ± 30 g.g -1 and a δD value (-330 ± 160‰) for their parent magma. During eruption, hydrogen degassing led to an increase in the D/H ratio of the residual melts up to δD values of 300-900‰. Accounting for low degrees of mantle partial melting followed by extensive magma fractional crystallisation 4 , we estimate a maximum mantle water abundance of 2-6 g.g -1 , which are too low for water contents alone to account for generating the Moon's youngest basalts. Such modest water abundances for the lunar mantle are at the lower end of those estimated from mare basalts that erupted from ca. 4.0-2.8 Ga 5, 6 , suggesting the mantle source of CE5 basalts dried up by ca. 2.0 Ga through previous melt extraction from the PKT mantle during prolonged volcanic activity.Water abundance in the lunar mantle places strict constraints on high-temperature processes, including the Moon-forming giant impact 1 , the ensuing crystallisation of the lunar magma ocean 7 , and the longevity of volcanism on the Moon 2 . Based upon the analyses carried out since the Apollo era, the Moon was long thought to be an anhydrous body. Advances in in situ analytical techniques over the past decade have allowed analysis of water abundances at micro-scale in various lunar samples, including in olivine-and pyroxene-hosted melt inclusions in mare basalts [8][9][10][11][12] , apatite in mare basalts and highlands samples [13][14][15][16][17][18][19][20] , pyroclastic glass beads 21, 22 , and
Real-time and high-resolution target detection is highly desirable in modern radar applications. Electronic techniques have encountered grave difficulties in the development of such radars, which strictly rely on a large instantaneous bandwidth. In this article, a photonics-based real-time high-range-resolution radar is proposed with optical generation and processing of broadband linear frequency modulation (LFM) signals. A broadband LFM signal is generated in the transmitter by photonic frequency quadrupling, and the received echo is de-chirped to a low frequency signal by photonic frequency mixing. The system can operate at a high frequency and a large bandwidth while enabling real-time processing by low-speed analog-to-digital conversion and digital signal processing. A conceptual radar is established. Real-time processing of an 8-GHz LFM signal is achieved with a sampling rate of 500 MSa/s. Accurate distance measurement is implemented with a maximum error of 4 mm within a range of ~3.5 meters. Detection of two targets is demonstrated with a range-resolution as high as 1.875 cm. We believe the proposed radar architecture is a reliable solution to overcome the limitations of current radar on operation bandwidth and processing speed, and it is hopefully to be used in future radars for real-time and high-resolution target detection and imaging.
A scheme for photonic generation of linearly chirped microwave waveforms (LCMWs) with a large time-bandwidth product (TBWP) is proposed and demonstrated based on an optically injected semiconductor laser. In the proposed system, the optically injected semiconductor laser is operated in period-one (P1) oscillation state. After optical-to-electrical conversion, a microwave signal can be generated with its frequency determined by the injection strength. By properly controlling the injection strength, an LCMW with a large TBWP can be generated. The proposed system has a simple and compact structure. Besides, the center frequency, bandwidth, as well as the temporal duration of the generated LCMWs can be easily adjusted. An experiment is carried out. LCMWs with TBWPs as large as 1.2x105 (bandwidth 12 GHz; temporal duration 10 μs) are successfully generated. The flexibility for tuning the center frequency, bandwidth and temporal duration is also demonstrated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.