The use of electrical energy that is often encountered in households is leaving the house with the lights on, leaving electronic goods stuck in the socket, charging cell phones overnight and turning on the air conditioner when no one is around. This unwise behavior will result in a high increase in the use of electrical energy. To reduce this unwise behavior, a device will be made that functions as a switch to cut off electrical energy automatically when we leave the room. This tool uses an Arduino Uno microcontroller with a Passive Infrared Receiver sensor to flow electrical energy when we enter the room and cut off electrical energy when leaving the room. It can be concluded that the use of an automatic switch can reduce electrical energy consumption. Automatic switches with a delay of 20 seconds compared to conventional switches have a significant ratio of electrical energy consumption as indicated by the test results of a multiple ratio of 0.00 with a test level of less than 0.05. Using an automatic switch with a 20 second delay results in savings in electrical energy consumption of 48.76% of the electrical energy consumption using conventional switches.
Drop tegangan merupakan peristiwa dimana saat pendistribusian tegangan listrik terjadi penurunan tegangan pada beberapa titik konsumen. besarnya tegangan yang diterima tidak sama dengan tegangan yang dikirim. Salah satu penyebab besarnya drop adalah bertambahnya beban listrik. RS X merupakan salah satu Rumah Sakit yang ada di pulau Bali. Rumah Sakit ini mulai dibangun pada tahun 1956 dan beroperasi sampai saat ini. Sudah dapat dipastikan dengan berkembangnya RS X kebutuhan akan energi listrik juga bertambah. Peralatan-peralatan yang menggunakan energi listrik sudah pasti juga mengalami peningkatan jumlah. Hal ini menyebabkan pada satu ruangan bisa mengalami kelebihan beban dibanding dengan ruangan lain yang menyebabkan ketidakseimbangan beban dan ini merupakan salah satu faktor penyebab dari drop tegangan. Metode yang digunakan dalam menghitung drop tegangan yaitu metode aliran daya (Load Flow), dalam metode ini digunakan software ETAP 16.0 untuk mendapatkan Nilai Drop Tegangan. Adapun hasil yang didapatkan setelah dilakukan perbaikan drop tegangan sesuai standar PLN 1:1978 dengan menambahkan kapasitor bank pada simulasi ETAP 16.0 pada Trafo 3 Powerhouse menjadi 0,9%, Trafo W1 menjadi 1,61%, Trafo1 Gerai1 menjadi 0,98%, Trafo2 Gerai1 menjadi 0,82%, Trafo1 Gerai2 menjadi 0,27%, Trafo2 Gerai2 menjadi 1,52%, Trafo1 Gerai3 menjadi 1,31%, Trafo1 Gerai5 menjadi 1,68%, Trafo2 Gerai5 menjadi 1,04%, Trafo3 Gerai5 menjadi 1,04%, Trafo1 Gerai4 menjadi 1,52%, dan Trafo3 Gerai4 menjadi 1,33%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.