Abstract-In this letter, we study the performance of Network Coding (NC)-aided cooperative communications in large scale networks, where the relays are able to harvest energy emitted by wireless transmissions. In particular, we derive theoretical expressions for key network performance metrics, i.e., the probability of successful data exchange and the network lifetime gain. The proposed analytical expressions are verified via extensive Monte Carlo simulations, demonstrating the potential benefits of the energy harvested by the wireless transmissions.

Abstract-As large-scale dense and often randomly deployed wireless sensor networks (WSNs) become widespread, local information exchange between co-located sets of nodes may play a significant role in handling the excessive traffic volume. Moreover, to account for the limited life-span of the wireless devices, harvesting the energy of the network transmissions provides significant benefits to the lifetime of such networks. In this paper, we study the performance of communication in dense networks with wireless energy harvesting (WEH)-enabled sensor nodes. In particular, we examine two different communication scenarios (direct and cooperative) for data exchange and we provide theoretical expressions for the probability of successful communication. Then, considering the importance of lifetime in WSNs, we employ state-of-the-art WEH techniques and realistic energy converters, quantifying the potential energy gains that can be achieved in the network. Our analytical derivations, which are validated by extensive Monte-Carlo simulations, highlight the importance of WEH in dense networks and identify the trade-offs between the direct and cooperative communication scenarios.

The upcoming fifth generation (5G) of mobile communications urge software defined networks (SDN) and network function virtualization (NFV) to join forces with the multiaccess edge computing (MEC) cause. Thus, reduced latency and increased capacity at the edge of the network can be achieved, to satisfy the requirements of the internet of things (IoT) ecosystem. If not properly orchestrated, the flexibility of the virtual network functions (VNFs) incorporation, in terms of deployment and lifecycle management, may cause serious issues in the NFV scheme. As the service level agreements (SLAs) of the 5G applications compete in an environment with traffic variations and VNF placement options with diverse computing or networking resources, an online placement approach is needed. In this paper, we discuss the VNF lifecycle management challenges that arise from such heterogeneous architecture, in terms of VNF onboarding and scheduling. In particular, we enhance the intelligence of the NFV orchestrator (NFVO) by providing i) a latency-based embedding mechanism, where the VNFs are initially allocated to the appropriate tier, and ii) an online scheduling algorithm, where the VNFs are instantiated, scaled, migrated and destroyed based on the actual traffic. Finally, we design and implement a MEC-enabled 5G platform to evaluate our proposed mechanisms in real-life scenarios. The experimental results demonstrate that our proposed scheme maximizes the number of served users in the system by taking advantage of the online allocation of edge and core resources, without violating the application SLAs.

As industries are under pressure for shorter business and product lifecycles, there is an extensive effort from the research community for novel and profitable automation processes. This effort has given rise to the 5G Tactile Internet, which is characterized by extremely low latency communication in combination with high availability, reliability and security. In this paper, we discuss the key technologies to support the Tactile Internet characteristics in industrial environments and, then, we showcase the implementation of a novel 5G NFV-enabled experimental platform. Given that ultra-reliable low-latency communications is crucial for the manufacturing process, we demonstrate that, in our setup, sub-millisecond end-to-end communication is attainable, proving the suitability of our platform for tactile Internet industrial applications.

Wireless medium access control (MAC) and routing protocols are fundamental building blocks of the Internet of Things (IoT). As new IoT networking standards are being proposed and different existing solutions patched, evaluating the end-toend performance of the network becomes challenging. Specific solutions designed to be beneficial, when stacked may have detrimental effects on the overall network performance. In this paper, an analysis of MAC and routing protocols for IoT is provided with focus on the IEEE 802.15.4 MAC and the IETF RPL standards. It is shown that existing routing metrics do not account for the complex interactions between MAC and routing, and thus novel metrics are proposed. This enables a protocol selection mechanism for selecting the routing option and adapting the MAC parameters, given specific performance constraints. Extensive analytical and experimental results show that the behavior of the MAC protocol can hurt the performance of the routing protocol and vice versa, unless these two are carefully optimized together by the proposed method. (P.-V. Mekikis), carlofi@kth.se (C. Fischione) 1 P. Mekikis was with the School of Electrical Engineering, KTH, when contributing to this work.

Abstract-As the number of nodes in wireless sensor networks (WSNs) increases, new challenges have to be faced in order to maintain their performance. A fundamental requirement of several applications is the correct transmission of the measurements to their final destinations. Thus, it is crucial to guarantee a high probability of connectivity, which characterizes the ability of every node to report to the fusion center. This network metric is strongly affected by both the fading characteristics and the different routing protocols that are used for the dissemination of data. In this paper, we study the probability of a network to be fully connected for two widely employed routing mechanisms, namely unicast and K-anycast. The analytical derivations and the simulations evaluate the trade-offs among the different routing mechanisms and provide useful guidelines on the design of WSNs.

People worldwide are getting older and this fact has pushed the need for designing new, more pervasive, and possibly cost effective healthcare systems. In this field, distributed and networked embedded systems, such as wireless sensor networks (WSNs), are the most appealing technology to achieve continuous monitoring of aged people for their own safety, without affecting their daily activities. This paper proposes recent advancements in this field by introducing WSN4QoL, a Marie Curie project which involves academic and industrial partners from three EU countries. The project aims to propose new WSN-based technologies to meet the specific requirements of pervasive healthcare applications. In particular, in this paper, the system architecture is presented to cope with the challenges imposed by the specific application scenario. This includes a network coding (NC) mechanism and a distributed localization solution that have been implemented on WSN testbeds to achieve efficiency in the communications and to enable indoor people tracking. Preliminary results in a real environment show good system performance that meet our expectations.

Emerging 5G communication paradigms, such as machine-type communication, have triggered an explosion in ad-hoc applications that require connectivity among the nodes of wireless networks.Ensuring a reliable network operation under fading conditions is not straightforward, as the transmission schemes and the network topology, i.e., uniform or clustered deployments, affect the performance and should be taken into account. Moreover, as the number of nodes increases, exploiting natural energy sources and wireless energy harvesting (WEH) could be the key to the elimination of maintenance costs, while also boosting immensely the network lifetime. In this way, zero-energy wireless-powered sensor networks (WPSNs) could be achieved, if all components are powered by green sources. Hence, designing accurate mathematical models that capture the network behavior under these circumstances is necessary to provide a deeper comprehension of such networks. In this paper, we provide an analytical model for the connectivity in a large-scale zero-energy clustered WPSN under two common transmission schemes, namely unicast and broadcast. The sensors are WEH-enabled, while the network components are solar-powered and employ a novel energy allocation algorithm. In our results, we evaluate the tradeoffs among the various scenarios via extensive simulations and identify the conditions that yield a fully connected zero-energy WPSN.