No abstract

Trigonal tricationic ionic liquids (ILs) are a new class of ILs that appear to be unique when used as gas chromatographic stationary phases. They consist of four core structures; (1) A = mesitylene core, (2) B = benzene core, (3) C = triethylamine core, and (4) D = tri(2-hexanamido)ethylamine core; to which three identical imidazolium or phosphonium cationic moieties were attached. These were coated on fused silica capillaries, and their gas chromatographic properties were evaluated. They were characterized using a linear solvation parameter model and a number of test mixtures. On the basis of the literature, it is known that both monocationic and dicationic ILs possess almost identical polarities, solvation characteristics, and chromatographic selectivities. However, some of the trigonal tricationic ILs were quite different. The different solvation parameters and higher apparent polarities appear to generate from the more rigid trigonal geometry of these ILs, as well as their ability to retain the positive charges in relatively close proximity to one another in some cases. Their unique selectivities, retention behaviors, and separation efficiencies were demonstrated using the Grob mixture, a flavor and fragrance test mixture, alcohols/alkanes test, and FAME isomer separations. Two ILs C1 (methylimidazolium substitution) and C4 (2-hydroxyethylimidazolium substitution) had higher apparent polarities than any know IL (mono, di, and tricationic ILs) or commercial stationary phases. The tri(2-hexanamido)ethylamine core IL series proved to be very interesting in that it not only showed the highest separation efficiency for all test mixtures, but it also is the first IL stationary phase (containing NTf(2)(-) anions) that eliminates peak tailing for alcohols and other H-bonding analytes. The thermal stabilities were investigated using three methods: thermogravimetric analysis (TGA) method, temperature programmed gas chromatographic method (TPGC), and isothermal gas chromatographic method. The D core series had a high working temperature range, exceptional selectivities, and higher separation efficiencies than comparable polarity commercial columns. It appears that this specific type of multifunctional ILs may have the most promising future as a new generation of gas chromatographic stationary phases.

Water or aqueous electrolytes are the dominant components in electrowetting on dielectric (EWOD)-based microfluidic devices. Low thermal stability, evaporation, and a propensity to facilitate corrosion of the metal parts of integrated circuits or electronics are drawbacks of aqueous solutions. The alternative use of ionic liquids (ILs) as electrowetting agents in EWOD-based applications or devices could overcome these limitations. Efficient EWOD devices could be developed using task-specific ILs. In this regard, a fundamental study on the electrowetting properties of ILs is essential. Therefore electrowetting properties of 19 different ionic liquids, including mono-, di-, and tricationic, plus mono- and dianionic ILs were examined. All tested ILs showed electrowetting of various magnitudes on an amorphous flouropolymer layer. The effects of IL structure, functionality, and charge density on the electrowetting properties were studied. The enhanced stability of ILs in electrowetting on dielectric at higher voltages was studied in comparison with water. Deviations from classical electrowetting theory were confirmed. The physical properties of ILs and their electrowetting properties were tabulated. These data can be used as references to engineer task-specific electrowetting agents (ILs) for future electrowetting-based applications.

The analysis of anions remains an important task for many areas of science, and new sensitive analytical methods continue to be of great interest. In this study, we present the use of 17 tricationic reagents for use as gas-phase ion pairing agents for divalent anions. When the anion pairs with the tricationic reagent, an overall positive charge is retained and enables detection by ESI-MS in the positive mode. The 17 tricationic reagents were made from 1 of 4 core structures and 7 terminal charged groups. The effect of these structural elements on the detection sensitivity of the complex is examined empirically. A comparison of signal-to-noise ratios achieved in positive and negative modes also is presented.

Dynamic solvation of the dye coumarin 153 is studied in a phosphonium ionic liquid: hexadecyltributylphosphonium bromide, [(C4)3C16P+][Br-]. It forms micelles in water, and the bulk also exists as a liquid under our experimental conditions. This system permits a comparison with an imidazolium ionic liquid studied earlier, which also formed micelles in water (J. Phys. Chem. A 2006, 110, 10725−10730). We conclude that our analysis of the comparable situation in a phosphonium liquid is not as definitive as we had proposed earlier, i.e., that the majority of the early-time solvation arises from the organic cation. Part of the difficulty in performing this analysis is most likely due to the amount of water that is associated with the micelle. In the course of this work, we have focused on the calculation of the solvation correlation function, C(t), and investigated how it depends upon the methods with which the "zero-time" spectrum is constructed. Arlington, Box 19065, Arlington, Texas 76019 ReceiVed: NoVember 8, 2007; In Final Form: December 7, 2007 Dynamic solvation of the dye coumarin 153 is studied in a phosphonium ionic liquid: hexadecyltributylphosphonium bromide, [(C 4 ) 3 C 16 P + ][Br -]. It forms micelles in water, and the bulk also exists as a liquid under our experimental conditions. This system permits a comparison with an imidazolium ionic liquid studied earlier, which also formed micelles in water (J. Phys. Chem. A 2006, 110, 10725-10730). We conclude that our analysis of the comparable situation in a phosphonium liquid is not as definitive as we had proposed earlier, i.e., that the majority of the early-time solvation arises from the organic cation. Part of the difficulty in performing this analysis is most likely due to the amount of water that is associated with the micelle. In the course of this work, we have focused on the calculation of the solvation correlation function, C(t), and investigated how it depends upon the methods with which the "zero-time" spectrum is constructed. Keywords