No abstract

Two new small molecules with a rigid planar naphtho[1,2-b:5,6-b']dithiophene (NDT) unit were designed and synthesized. Solution processed bulk-hetereojunction organic solar cells based on blends of the small molecules and [6,6]-phenyl-C(71)-butyric acid methyl ester (PC(71)BM) exhibited promising photovoltaic device performance with a maximum power conversion efficiency up to 2.20% under the illumination of AM 1.5G, 100 mW cm(-2).

A new donor-acceptor-conjugated organic small molecule, BDT(TBT)(2), comprised of benzo[1,2-b:4,5-b']dithiophene and 2,1,3-benzothiadiazole units was designed and synthesized. The small molecule BDT(TBT)(2) in its thin film showed an absorption band in the range of 300-700 nm with an absorption edge at 650 nm and an optical band gap of 1.90 eV. As estimated from the cyclic voltammetry measurements, the HOMO and LUMO energy levels of BDT(TBT)(2) were -5.44 and -3.37 eV, respectively. The spin-coated thin film of BDT(TBT)(2) exhibited p-channel output characteristics with a hole mobility of 2.7 × 10(-6). BDT(TBT)(2), when explored as an electron-donor material in solution-processed bulk-heterojunction organic solar cells in conjunction with a PC(71)BM acceptor with an active layer thickness of 50-55 nm, generated a power conversion efficiency (PCE) of 1.18%. A more impressive PCE of ~2.9% with a short-circuit current density (J(sc)) of 7.94 mA cm(-2) and an open-circuit voltage (V(oc)) of 0.89 V was achieved when the active layer of the cell was annealed at higher temperature (~180 °C).

No abstract

No abstract

No abstract

An amino-acid-based hydrophobically modified biocompatible copolymer, poly[(sodium N-acryloyl-L-valinate)-co-(N-octylacrylamide)] was synthesized and characterized. Techniques such as fluorescence probes, DLS, and TEM were used to investigate its aggregation behavior in aqueous solution. The copolymer was observed to form micellar aggregates having diameters in the nanometer range in aqueous solution (pH = 8) through inter-chain hydrophobic association. This behavior was found to be similar to that of poly[(sodium N-acryloyl-L-valinate)-co-(N-dodecylacrylamide)]. The compact micellar nanostructures were observed to be stable with respect to changes of pH and temperature. The encapsulation and release of griseofulvin, a hydrophobic model drug, was studied.

A set of three donor‐acceptor conjugated (D‐A) copolymers were designed and synthesized via Stille cross‐coupling reactions with the aim of modulating the optical and electronic properties of a newly emerged naphtho[1,2‐b:5,6‐b′]dithiophene donor unit for polymer solar cell (PSCs) applications. The PTNDTT‐BT, PTNDTT‐BTz, and PTNDTT‐DPP polymers incorporated naphtho[1,2‐b:5,6‐b′]dithiophene (NDT) as the donor and 2,2′‐bithiazole (BTz), benzo[1,2,5]thiadiazole (BT), and pyrrolo[3,4‐c]pyrrole‐1,4(2H,5H)‐dione (DPP), as the acceptor units. A number of experimental techniques such as differential scanning calorimetry, thermogravimetry, UV–vis absorption spectroscopy, cyclic voltammetry, X‐ray diffraction, and atomic force microscopy were used to determine the thermal, optical, electrochemical, and morphological properties of the copolymers. By introducing acceptors of varying electron withdrawing strengths, the optical band gaps of these copolymers were effectively tuned between 1.58 and 1.9 eV and their HOMO and LUMO energy levels were varied between −5.14 to −5.26 eV and −3.13 to −3.5 eV, respectively. The spin‐coated polymer thin film exhibited p‐channel field‐effect transistor properties with hole mobilities of 2.73 × 10−3 to 7.9 × 10−5 cm2 V−1 s−1. Initial bulk‐heterojunction PSCs fabricated using the copolymers as electron donor materials and [6,6]‐phenyl C71 butyric acid methyl ester (PC71BM) as the acceptor resulted in power conversion efficiencies in the range of 0.67–1.67%. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 2948–2958