High-velocity oxy-fuel (HVOF) spray coating plays a major role in many surface treatment methods, which tend to improve erosion and corrosion resistance properties. HVOF is well known for its dense and high-quality coating ability. This is due to the less in-flight exposure time, which tends to have less oxide content because of its high-velocity properties. Among the number of process parameters, porosity and hardness are predominant factors while considering wear rate and corrosion behaviour analysis. The current study aims to optimise HVOF process parameters to obtain low levels of porosity and high hardness values in the WC-10Ni-5Cr coating sprayed on 35 Mo Cr steel. The flow rates of oxygen, LPG, coating powder feed rate and spray distance are selected in this study as these have a superior influence on the final condition of the coating. Statistical tools such as the design of experiments (DoE), analysis of variants and response surface methodology (RSM) were used to achieve the desired results. As per the result analysis, the oxygen flow rate has a higher effect on the porosity value and microhardness value of the coating.
To improve the corrosion resistance of Mg alloy, Al alloy/alumina metal matrix composite (MMC) coatings were formed by low pressure cold spraying (LPCS) technology followed by post friction stir processing. The phase structure, microstructure, and corrosion properties of the cold-sprayed metal matrix composite coatings before and after friction stir processing were investigated. The effect of the friction stir process (FSP) on the corrosion characteristics of MMC coatings at 3.5 weight percent of NaCl solution was explored using a Tafel polarisation plot. Microstructural studies were examined to investigate the electrochemical behaviour of the cold spray (CS) and FSPed MMC coatings. The results demonstrated that an enhancement in corrosion protection of the MMC deposits occurred at the 1st and 2nd runs of FSP, with superior corrosion performance observed at the 2nd run of FSP. The enhanced surface state is the primary enhancement mechanism of the electrochemical properties of the FSPed MMC coatings. For the higher run of FSP (3rd run), the electrochemical performance of the specimens was lower owing to the amalgamate action of the enhanced surface state with the aggravated interface of interior deposits.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.