No abstract

The application of doping in semiconductors plays a major role in the high performances achieved to date in inorganic devices. In contrast, doping has yet to make such an impact in organic electronics. One organic device that does make extensive use of doping is the light-emitting electrochemical cell (LEC), where the presence of mobile ions enables dynamic doping, which enhances carrier injection and facilitates relatively large current densities. The mechanism and effects of doping in LECs are, however, still far from being fully understood, as evidenced by the existence of two competing models that seem physically distinct: the electrochemical doping model and the electrodynamic model. Both models are supported by experimental data and numerical modeling. Here, we show that these models are essentially limits of one master model, separated by different rates of carrier injection. For ohmic nonlimited injection, a dynamic p-n junction is formed, which is absent in injection-limited devices. This unification is demonstrated by both numerical calculations and measured surface potentials as well as light emission and doping profiles in operational devices. An analytical analysis yields an upper limit for the ratio of drift and diffusion currents, having major consequences on the maximum current density through this type of device.

The emerging field of “organic” or “plastic” electronics has brought low-voltage, ultrathin, and energy-efficient lighting and displays to market as organic light-emitting diode (OLED) televisions and displays in cameras and mobile phones. Despite using carbon-based materials as the light-emitting layer, previous efficient organic electronic light-emitting devices have required at least one metal electrode. Here, we utilize chemically derived graphene for the transparent cathode in an all-plastic sandwich-structure device, similar to an OLED, called a light-emitting electrochemical cell (LEC). Using a screen-printable conducting polymer as a partially transparent anode and a micrometer-thick active layer solution-deposited from a blend of a light-emitting polymer and a polymer electrolyte, we demonstrate a light-emitting device based solely on solution-processable carbon-based materials. Our results demonstrate that low-voltage, inexpensive, and efficient light-emitting devices can be made without using metals. In other words, electronics can truly be “organic”.

We demonstrate that electrochemical side-reactions involving the electrolyte can be a significant and undesired feature in light-emitting electrochemical cells (LECs). By direct optical probing of planar LECs, comprising Au electrodes and an active material mixture of {poly[2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylenevinylene] (MEH-PPV) + poly(ethylene oxide) (PEO) + KCF3SO3}, we show that two direct consequences of such a side-reaction are the appearance of a "degradation layer" at the negative cathode and the formation of the light-emitting p-n junction in close proximity to the cathode. We further demonstrate that a high initial drive voltage and a high ionic conductivity of the active material strongly alleviate the extent of the side reaction, as evidenced by the formation of a relatively centered p-n junction, and also rationalize our findings in the framework of a general electrochemical model. Finally, we show that the doping concentrations in the doped regions at the time of the p-n junction formation are independent of the applied voltage and relatively balanced at approximately 0.11 dopants/MEH-PPV repeat unit in the p-type region and approximately 0.15 dopants/MEH-PPV repeat unit in the n-type region.