Self-assembly of thiol-terminated single-stranded DNA (HS-ssDNA) on gold has served as an important model system for DNA immobilization at surfaces. Here, we report a detailed study of the surface composition and structure of mixed self-assembled DNA monolayers containing a short alkylthiol surface diluent [11-mercapto-1-undecanol (MCU)] on gold supports. These mixed DNA monolayers were studied with X-ray photoelectron spectroscopy (XPS), near-edge X-ray absorption fine structure spectroscopy (NEXAFS), and fluorescence intensity measurements. XPS results on sequentially adsorbed DNA/MCU monolayers on gold indicated that adsorbed MCU molecules first incorporate into the HS-ssDNA monolayer and, upon longer MCU exposures, displace adsorbed HSssDNA molecules from the surface. Thus, HS-ssDNA surface coverage steadily decreased with MCU exposure time. Polarization-dependent NEXAFS and fluorescence results both show changes in signals consistent with changes in DNA orientation after only 30 min of MCU exposure. NEXAFS polarization dependence (followed by monitoring the N 1s → π* transition) of the mixed DNA monolayers indicated that the DNA nucleotide base ring structures are oriented more parallel to the gold surface compared to DNA bases in pure HS-ssDNA monolayers. This indicates that HS-ssDNA oligomers reorient toward a more-upright position upon MCU incorporation. Fluorescence intensity results using end-labeled DNA probes on gold show little observable fluorescence on pure HSssDNA monolayers, likely due to substrate quenching effects between the fluorophore and the gold. MCU diluent incorporation into HS-ssDNA monolayers initially increases DNA fluorescence signal by densifying the chemisorbed monolayer, prompting an upright orientation of the DNA, and moving the terminal fluorophore away from the substrate. Immobilized DNA probe density and DNA target hybridization in these mixed DNA monolayers, as well as effects of MCU diluent on DNA hybridization in complex milieu (i.e., serum) were characterized by surface plasmon resonance (SPR) and 32 P-radiometric assays and reported in a related study Methods for surface-immobilizing single-strand nucleic acids that preserve their original hybridization specificity with minimized nonspecific interactions remain an important goal for improving the performance of DNA microarray and biosensor applications. As summarized in a recent review, 1 nucleic acid hybridization behavior observed between complementary probe and target DNA molecules in bulk solution differ from identical hybridization at a solid-liquid * Corresponding author. interface. In surface hybridization, nonspecific probe-surface interactions, electrostatic forces, and steric issues between adjacent DNA probes influence DNA target hybridization efficiency and capacity. For example, nucleotide primary amines on nonhybridized DNA segments can interact (e.g., covalently 2 or by acid-base adsorption) with the surface, becoming unavailable to hybridize with target DNA molecules. Effects of immobilized DNA p...

Surface hybridization reactions, in which sequence-specific recognition occurs between immobilized and solution nucleic acids, are routinely carried out to quantify and interpret genomic information. Although hybridization is fairly well understood in bulk solution, the greater complexity of an interfacial environment presents new challenges to a fundamental understanding, and hence application, of these assays. At a surface, molecular interactions are amplified by the two-dimensional nature of the immobilized layer, which focuses the nucleic acid charge and concentration to levels not encountered in solution, and which impacts the hybridization behavior in unique ways. This study finds that, at low ionic strengths, an electrostatic balance between the concentration of immobilized oligonucleotide charge and solution ionic strength governs the onset of hybridization. As ionic strength increases, the importance of electrostatics diminishes and the hybridization behavior becomes more complex. Suppression of hybridization affinity constants relative to solution values, and their weakened dependence on the concentration of DNA counterions, indicate that the immobilized strands form complexes that compete with hybridization to analyte strands. Moreover, an unusual regime is observed in which the surface coverage of immobilized oligonucleotides does not significantly influence the hybridization behavior, despite physical closeness and hence compulsory interactions between sites. These results are interpreted and summarized in a diagram of hybridization regimes that maps specific behaviors to experimental ranges of ionic strength and probe coverage.biosensor ͉ ferrocene ͉ ionic strength ͉ microarray ͉ probe coverage S olid-phase or ''surface'' hybridization is the foundation of modern microarray and biosensing technologies widely used in applied genomics for genotyping, drug discovery, gene expression profiling, and related applications based on measurement of genomic information (1, 2). These tools function through detection of interactions between nucleic acids immobilized on a solid support, or ''probes,'' with analyte ''target'' nucleic acids present in solution. Binding, or hybridization, between probes and targets to form an immobilized duplex takes place based on the degree of complementarity between the probe and target base sequences. The tremendous growth in applications of surface hybridization has been mirrorred by increased emphasis on experimental and fundamental aspects of the assays that directly impact measurement and interpretation of data (3, 4).As summarized in several recent reviews (5-8), physical studies under simplified experimental conditions have begun to unravel the rich phenomenology that occurs in diagnostic assays. Applications typically operate away from equilibrium and are faced with a highly diverse pool of target sequences competing for the probe sites. A variety of aids to enhance hybridization performance is used, including surfactants and blocking agents to control nonspecific adsorp...

Nucleic acid assay from a complex biological milieu is attractive but currently difficult and far from routine. In this study, DNA hybridization from serum dilutions into mixed DNA/mercaptoundecanol (MCU) adlayers on gold was monitored by surface plasmon resonance (SPR). Immobilized DNA probe and hybridized target densities on these surfaces were quantified using 32P-radiometric assays as a function of MCU diluent exposure. SPR surface capture results correlated with radiometric analysis for hybridization performance, demonstrating a maximum DNA hybridization on DNA/MCU mixed adlayers. The maximum target surface capture produced by MCU addition to the DNA probe layer correlates with structural and conformational data on identical mixed DNA/MCU adlayers on gold derived from XPS, NEXAFS, and fluorescence intensity measurements reported in a related study (Lee, C.-Y.; Gong, P.; Harbers, G. M.; Grainger, D. W.; Castner, D. G.; Gamble, L. J. Anal. Chem. 2006, 78, 3316-3325.). MCU addition into the DNA adlayer on gold also improved surface resistance to both nonspecific DNA and serum protein adsorption. Target DNA hybridization from serum dilutions was monitored with SPR on the optimally mixed DNA/MCU adlayers. Both hybridization kinetics and efficiency were strongly affected by nonspecific protein adsorption from a complex milieu even at a minimal serum concentration (e.g., 1%). No target hybridization was detected in SPR assays from serum concentrations above 30%, indicating nonspecific protein adsorption interference of DNA capture and hybridization from complex milieu. Removal of nonsignal proteins from nucleic acid targets prior to assay represents a significant issue for direct sample-to-assay nucleic acid diagnostics from food, blood, tissue, PCR mixtures, and many other biologically complex sample formats.

No abstract

Surface hybridization, a reaction in which nucleic acid molecules in solution react with nucleic acid partners immobilized on a surface, is widely practiced in life science research. In these applications the immobilized partner, or "probe", is typically single-stranded DNA. Because DNA is strongly charged, high salt conditions are required to enable binding between analyte nucleic acids ("targets") in solution and the DNA probes. High salt, however, compromises prospects for label-free monitoring or control of the hybridization reaction through surface electric fields, as well as stabilizes secondary structure in target species that can interfere with probe-target recognition. In this work, initial steps toward addressing these challenges are taken by introducing Morpholinos, a class of uncharged DNA analogues, for surface-hybridization applications. Monolayers of Morpholino probes on gold supports can be fabricated with methods similar to those employed with DNA, and are shown to hybridize efficiently and sequence-specifically with target strands. Hybridization-induced changes in the interfacial charge organization are analyzed with electrochemical methods and compared for Morpholino and DNA probe monolayers. Molecular mechanisms connecting surface hybridization state to the interfacial capacitance are identified and interpreted through comparison to numerical Poisson Boltzmann calculations. Interestingly, positive as well as negative capacitive responses (contrast inversion) to hybridization are possible, depending on surface populations of mobile ions as controlled by the applied potential. Quantitative comparison of surface capacitance with target coverage (targets/area) reveals a near-linear relationship, and demonstrates sensitivities (limits of quantification) in the pg mm −2 range.

The design and interpretation of surface hybridization assays is complicated by poorly understood aspects of the interfacial environment that cause both kinetic and thermodynamic behaviors to deviate from those in solution. The origins of these differences lie in the additional interactions experienced by hybridizing strands at the surface. In this report, an analysis of surface hybridization equilibria is provided for end-tethered, single-stranded oligonucleotide "probes" hybridizing with similarly sized, single-stranded solution "target" molecules. Theoretical models by Vainrub and Pettitt (Phys. Rev. E 2002, 66, 041905) and by Halperin, Buhot, and Zhulina (Biophys. J. 2004, 86, 718), and an "extended" model that in addition includes a solution-like salt dependence of probe-target dimerization, are compared to experiments as a function of salt concentration and probe coverage. Good agreement with experiment is observed when the DNA volume fraction at the surface remains below approximately 0.25. None of the models, however, can account for strong suppression of hybridization when the volume fraction of DNA approaches 0.3, realizable in the limit of high buffer strength and densely tethered films. Under these conditions, hybridization yields become insensitive to increases in analyte concentration even though many probes remain available to bind targets. These observations are attributed to the onset of packing constraints which, interestingly, become limiting significantly below maximum DNA coverages estimated from ideally efficient hexagonal packing. By delineating conditions under which specific hybridization behaviors are observed, the results advance fundamental knowledge in support of DNA microarray and biosensor applications.

Because little is known about the actions of botanical estrogens (BEs), widely consumed by menopausal women, we investigated the mechanistic and cellular activities of some major BEs. We examined the interactions of genistein, daidzein, equol, and liquiritigenin with estrogen receptors ERα and ERβ, with key coregulators (SRC3 and RIP140) and chromatin binding sites, and the regulation of gene expression and proliferation in MCF-7 breast cancer cells containing ERα and/or ERβ. Unlike the endogenous estrogen, estradiol (E2), BEs preferentially bind to ERβ, but their ERβ-potency selectivity in gene stimulation (340- to 830-fold vs. E2) is enhanced at several levels (coregulator recruitment, chromatin binding); nevertheless, at high (0.1 or 1 μM) concentrations, BEs also fully activate ERα. Because ERα drives breast cancer cell proliferation and ERβ dampens this, the relative levels of these two ERs in target cells and the BE dose greatly affect gene expression and proliferative response and will be crucial determinants of the potential benefits vs. risks of BEs. Our findings reveal key and novel mechanistic differences in the estrogenic activities of BEs vs. E2, with BEs displaying patterns of activity distinctly different from those seen with E2 and provide valuable information to inform future studies.

Estrogenic and inflammatory components play key roles in a broad range of diseases including endometriosis, a common estrogen-dependent gynecological disorder in which endometrial tissue creates inflammatory lesions at extrauterine sites, causing pelvic pain and reduced fertility. Current medical therapies focus primarily on reducing systemic levels of estrogens, but these are of limited effectiveness and have considerable side effects. We developed estrogen receptor (ER) ligands, chloroindazole (CLI) and oxabicycloheptene sulfonate (OBHS), which showed strong ER-dependent anti-inflammatory activity in a preclinical model of endometriosis that recapitulates the estrogen dependence and inflammatory responses of the disease in immunocompetent mice and in primary human endometriotic stromal cells in culture. Estrogen-dependent phenomena, including cell proliferation, cyst formation, vascularization, and lesion growth, were all arrested by CLI or OBHS, which prevented lesion expansion and also elicited regression of established lesions, suppressed inflammation, angiogenesis, and neurogenesis in the lesions, and interrupted crosstalk between lesion cells and infiltrating macrophages. Studies in ERα or ERβ knockout mice indicated that ERα is the major mediator of OBHS effectiveness and ERβ is dominant in CLI actions, implying involvement of both ERs in endometriosis. Neither ligand altered estrous cycling or fertility at doses that were effective for suppression of endometriosis. Hence, CLI and OBHS are able to restrain endometriosis by dual suppression of the estrogen-inflammatory axis. Our findings suggest that these compounds have the desired characteristics of preventive and therapeutic agents for clinical endometriosis and possibly other estrogen-driven and inflammation-promoted disorders.