Sports mouthguards (MGs) can reduce the risks of sports-related oral injuries. The aim of this study was to fabricate a composite photopolymer with shock-absorbing properties suitable for use in 3D-printed MGs. By using a commercial, flexible, rubber-like photopolymer as matrix and a commercial rigid simulated polypropylene photopolymer as a reinforcement material, five composites with different Shore A hardness levels were fabricated. Furthermore, four laminated materials were prepared to assess the improvement effects associated with adding a rigid outer layer. The five composites and four laminated materials were evaluated in terms of their shock absorbing capabilities via a steel ball drop impact test along with two types of conventional mouthguard materials. The rubber-like photopolymer composite material compounded with the rigid photopolymer with a Shore A hardness of 50 showed excellent shock absorbing capabilities that were compatible with conventional mouthguard materials, suggesting that this shock absorbing photopolymer composite is a candidate material for 3D-printed sports MGs. If the commercial flexible rubber-like photopolymer is to be applied alone without reinforcement, laminating a rigid photopolymer on the outer surface may be an effective means of improving the shock absorption capabilities of such a MG. We succeeded in fabricating a prototype of a doublelayered mouthguard with these composite materials using a 3D digital dental workflow.

Sports face guards (FGs) are devices that protect athletes from maxillofacial injury or ensure rapid return to play following orofacial damage. Conventional FGs are uncomfortable to wear owing to stuffiness caused by poor ventilation and often slip off due to increase in weight due to absorption of moisture from perspiration, lowering players’ performance. Herein, combinations of 3D-printed perforated acrylonitrile butadiene styrene (ABS) polymer sheets and 3D-knitted fabrics with honeycomb structures as cushioning materials were investigated to balance better wearing feel and mechanical properties. The flexural strength, weight, and shock absorption ability of, and air flow rate through, the ABS sheets with five different perforation patterns were evaluated and compared with those of conventional FG materials comprising a combination of polycaprolactone sheets for the medical splint and polychloroprene rubber for the cushioning material. The ABS sheets having 10% open area and 2.52 mm round holes, combined with knitted fabric cushioning, exhibited the requisite shock absorbing, higher air permeability, and lower weight properties than the conventional materials. Our results suggest that FGs fabricated using combinations of 3D-printed perforated ABS polymer sheets and 3D-knitted fabrics with honeycomb structures may impart enhanced wearing comfort for athletes.

Error in Figures 3 and 6 [...]

No abstract

No abstract