Triboelectric nanogenerators (TENGs) offer an emerging market of self-sufficient power sources, converting the mechanical energy of the environment to electricity. Recently reported high power densities for the TENGs provide new applications opportunities, such as self-powered sensors. Here in this research, a flexible graphene oxide (GO) paper was fabricated through a straightforward method and utilized as the electrode of TENGs. Outstanding power density as high as 1.3 W.m−2, an open-circuit voltage up to 870 V, and a current density of 1.4 µA.cm−2 has been extracted in vertical contact-separation mode. The all-flexible TENG has been employed as a self-powered humidity sensor to investigate the effect of raising humidity on the output voltage and current by applying mechanical agitation in two forms of using a tapping device and finger tapping. Due to the presence of superficial functional groups on the GO paper, water molecules are inclined to be adsorbed, resulting in a considerable reduction in both generated voltage (from 144 V to 14 V) and current (from 23 µA to 3.7 µA) within the range of relative humidity of 20% to 99%. These results provide a promising applicability of the first suggested sensitive self-powered GO TENG humidity sensor in portable/wearable electronics.

No abstract

No abstract

The local electric field enhancement at various regions of an individual nanometre-thin gold mesotriangle has been demonstrated both numerically and experimentally. This work provides, for the first time, direct experimental evidence of localized enhancement of Raman signals at three edges of nanometre-thin gold mesotriangles at single particle level, using Raman microscopy. Raman images were collected from mesotriangles of $11 mm edge length and $30 nm thickness, using adsorbed crystal violet as the probe molecule. Spatial distribution and the extent of electric field enhancement around a single mesotriangle are investigated theoretically by finite-difference time-domain (FDTD) simulations. Confocal Raman studies provided direct proof for the substantial electrical field enhancement at the edges and corners compared to the face of the mesotriangle. The simulated electric field enhancement was in the order, corner > edge > surface, which is in complete agreement with the experimental results.

Multi electrode arrays (MEA) have been exploited in different electrophysiological applications. In neurological applications, MEAs are the vital interfaces between neurons and the electronic circuits with dual role; transmitting electric signal to the neurons and converting neural activity to the electric signal. Since the performance of the electrodes has a direct effect on the quality of the recorded neuronal signal, as well as the stimulation, the true choice of electrode material for MEA is crucial. Gold is one of the best candidates for fabrication of MEAs due to its high electrical conductivity, biocompatibility and good chemical stability. However, noble metals such as gold do not adhere well to the glass substrate. Consequently while exposing to the water, gold films are damaged, which impose limitations in the exploiting of gold thin films as the electrode. In this paper, a simple and cost effective method for the fabrication of gold electrode arrays is proposed. Using various mechanical (adhesion test and scratch strength), morphological (AFM and SEM) and electrochemical methods, the fabricated electrodes are characterized. The results show that the fabricated electrode arrays have significantly high scratch strength and stability within the aqueous medium. In addition, the electrical properties of the electrodes have been improved. The proposed electrodes have the potential to be exploited in other applications including electronics, electrochemistry, and biosensors.

Catecholamine neurotransmitters, generally including dopamine (DA), epinephrine (EP) and norepinephrine (NE) are known as substantial indicators of various neurological diseases. Simultaneous detection of these compounds and their metabolites is highly recommended in early clinical diagnosis. To this aim, in the present contribution, a high performance colorimetric sensor array has been proposed for the detection and discrimination of catecholamines based on their reducing ability to deposit silver on the surface of gold nanorods (AuNRs). The amassed silver nanoshell led to a blue shift in the longitudinal localized surface plasmon resonance (LSPR) peak of AuNRs, creating a unique pattern for each of the neurotransmitters. Hierarchical cluster analysis (HCA) and linear discriminate analysis (LDA) pattern recognition techniques were employed to identify DA, EP and NE. The proposed colorimetric array is able to differentiate among individual neurotransmitters as well as their mixtures, successfully. Finally, it was shown that the sensor array can identify these neurotransmitters in human urine samples.

No abstract

The polarization imaging technique is a powerful approach to probe microstructural and optical information of biological structures (e.g., tissue samples). Here, we have studied the polarization properties of different bacterial colonies in order to evaluate the possibility of bacterial detection and discrimination. In this regard, we have taken the backscattering Mueller matrix images of four different bacteria colonies (i.e., Escherichia coli, Lactobacillus rhamnosus, Rhodococcus erythropolis, and Staphylococcus aureus). Although the images have the potential to distinguish qualitatively different bacterial colonies, we explored more accurate and quantitative parameters criteria for discrimination of bacterial samples; more specifically, we have exploited the Mueller matrix polar decomposition (MMPD),frequency distribution histogram (FDH), and central moment analysis method. The outcomes demonstrated a superior capacity of Mueller matrix imaging, MMPD, and FDH in bacterial colonies identification and discrimination. This approach might pave the way for a reliable, efficient, and cheap way of identification of infectious diseases.