Die hochwertige Nutzung von Kellergeschossen zum Beispiel als Wohn‐ oder Arbeitsraum setzt voraus, dass bauphysikalische Aspekte in der Planung, Ausführung und Nutzung Berücksichtigung finden. Vornehmliches Ziel ist die Sicherstellung eines behaglichen Raumklimas und der Vermeidung von Tauwasser‐ und Schimmelpilzbildung. Zu diesem Zweck ist der Feuchteeintrag durch die Gebäudehülle und durch die Nutzung zu begrenzen. Der Feuchtetransport durch die Gebäudehülle ist hierbei von untergeordneter Bedeutung, da dieser bei Einhaltung der Vorgaben der WU‐Richtlinie nicht stattfindet. Auch die Abgabe der Baufeuchte ist nur in den ersten Monaten nach Nutzungsbeginn relevant. Wesentlichen Einfluss auf den Feuchtegehalt im Raum hat die Nutzung. Durch angepasste Lüftung muss der nutzungsbedingte Feuchteeintrag abgeführt werden. Feuchtespeichernde Materialien an den Innenoberflächen können das Raumklima zusätzlich positiv beeinflussen, indem Feuchtespitzen abgefangen werden. Durch eine wärmeschutztechnische Optimierung der Gebäudehülle wird erreicht, dass die Innenoberflächentemperaturen erhöht werden. Dies resultiert in Bauteiltemperaturen, die von den Nutzern als behaglich empfunden werden. Zudem reduziert sich dadurch das Risiko der Schimmel‐ und Tauwasserbildung. Unter dem Aspekt der Energieverluste im Bereich von Wärmebrücken und der damit verbundenen Kosten ist die Ausführung einer außengedämmten WU‐Konstruktion der innengedämmten Variante vorzuziehen. Aspects of building physics in the course of constructing high grade white tanks The premium use of basements for example as living or working space requires that aspects of the building physics in the planning, implementation and utilization are taken into account. The overriding objective is to ensure a comfortable indoor climate and the prevention of condensation and mould formation. In that regard, moisture entry shall be limited by the building envelope and by its use. The moisture transport through the building envelope is here of secondary importance, since this shall not occur when the requirements of the WU‐Directive are met. Building moisture is only relevant in the first months after the start of use. Significant influence on the moisture content in the room has its use. Adequate ventilation has to remove use‐related moisture entry. Moisture‐absorbing materials on the inner surface of walls can further positively influence the indoor climate as humidity peaks are reduced. A heat‐protective technical optimization of the building envelope leads into increasing surface temperatures of the structural components. This results in surface temperatures, which are perceived by users as being comfortable. In addition, the risk of mould and condensation is reduced. Under the aspect of energy losses in the area of thermal bridges and the associated costs, the execution of an externally insulated WU‐construction is preferable vs. the internally insulated alternative.
Within the field of textile construction, textiles are traditionally used either as decorative elements in interior design or as flat textiles in tensile-stressed lightweight constructions (roofs, temporary buildings, etc.). Technical textiles made of glass or carbon fibers are now also used as steel substitutes in concrete construction. There, flat textiles are also used as lost formwork or shaping semi-finished products. Applications for 3D textiles and in particular spacer textiles have so far only been investigated as part of multilayer constructions in combination with other elements. Otherwise, there are no studies for their application potential in the roof and wall areas of buildings and as a starting structure for opaque and translucent components. The two research projects presented here, "ReFaTex" (adjustable spacer fabrics for solar shading devices) and "ge3TEX" (warp-knitted, woven and foamed spacer fabrics) illustrate for one thing the possibilities for using 3D textiles for the construction of movable and translucently variable solar protection elements in the building envelope. Otherwise they show how 3D textiles in combination with foamed materials can be transformed into opaque, lightweight, self-supporting and insulated wall and ceiling components in the building envelope. Both projects are designed experimentally and iteratively. The results are compared in a qualifying manner, the aim being not to quantify individual measured variables but to explore the development potential of textile construction for sustainable future components and to realize the first demonstrators. In the ReFaTex project, 1:1 demonstrators with different movement mechanisms for controlling the incidence of light were realized. In the ge3TEX project, 1:1 demonstrators made of three different textile and foam materials were added to form new single-origin composite components for ceiling elements. Both projects show the great application potential for 3D textiles in the construction industry.
Die hochwertige Nutzung von Kellergeschossen zum Beispiel als Wohn‐ oder Arbeitsraum setzt voraus, dass bauphysikalische Aspekte in der Planung, Ausführung und Nutzung Berücksichtigung finden. Vornehmliches Ziel ist die Sicherstellung eines behaglichen Raumklimas und die Vermeidung von Tauwasser‐ und Schimmelpilzbildung. Zu diesem Zweck ist der Feuchteeintrag durch die Gebäudehülle und durch die Nutzung zu begrenzen. Der Feuchtetransport durch die Gebäudehülle ist hierbei von untergeordneter Bedeutung, da dieser bei Einhaltung der Vorgaben der WU‐Richtlinie nicht stattfindet. Auch die Abgabe der Baufeuchte ist nur in den ersten Monaten nach Nutzungsbeginn relevant. Wesentlichen Einfluss auf den Feuchtegehalt im Raum hat die Nutzung. Durch angepasste Lüftung muss der nutzungsbedingte Feuchteeintrag abgeführt werden. Feuchtespeichernde Materialien an den Innenoberflächen können das Raumklima zusätzlich positiv beeinflussen, indem Feuchtespitzen abgefangen werden. Durch eine wärmeschutztechnische Optimierung der Gebäudehülle wird erreicht, dass die Innenoberflächentemperaturen erhöht werden. Dies resultiert in Bauteiltemperaturen, die von den Nutzern als behaglich empfunden werden. Zudem reduziert sich dadurch das Risiko der Schimmel‐ und Tauwasserbildung. Unter dem Aspekt der Energieverluste im Bereich von Wärmebrücken und der damit verbundenen Kosten ist die Ausführung einer außen gedämmten WU‐Konstruktion der innengedämmten Variante vorzuziehen.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.