In locusts, two lobula giant movement detector neurons (LGMDs) act as looming object detectors. Their reproducible responses to looming and their ethological significance makes them models for single neuron computation. But there is no comprehensive picture of the neurons that connect directly to each LGMD. We used high-through-put serial block-face scanning-electron-microscopy to reconstruct the network of input-synapses onto the LGMDs over spatial scales ranging from single synapses and small circuits, up to dendritic branches and total excitatory input. Reconstructions reveal that many trans-medullary-afferents (TmAs) connect the eye with each LGMD, one TmA per facet per LGMD. But when a TmA synapses with an LGMD it also connects laterally with another TmA. These inter-TmA synapses are always reciprocal. Total excitatory input to the LGMD 1 and 2 comes from 131,000 and 186,000 synapses reaching densities of 3.1 and 2.6 synapses per μm2 respectively. We explored the computational consequences of reciprocal synapses between each TmA and 6 others from neighbouring columns. Since any lateral interactions between LGMD inputs have always been inhibitory we may assume these reciprocal lateral connections are most likely inhibitory. Such reciprocal inhibitory synapses increased the LGMD’s selectivity for looming over passing objects, particularly at the beginning of object approach.

Magnetic optical sensor particles with multifunctional cores and shells are synthesized via a facile nanoprecipitation method and the subsequent modification of the particle shell. The hydrophobic particle core includes optical oxygen indicators, a light harvesting system, photosensitizers, and magnetic nanoparticles. Further functionalities are introduced by modifying the shell with enzymes, antibodies, multiple layers of polyelectrolytes, stimuli‐responsive polymers, and luminescent indicator dyes. The hydrodynamic diameter is tunable by varying different precipitation parameters.

No abstract

Environmental scanning electron microscopy (ESEM) enables the investigation of hydrated and uncoated plant samples and the in situ observation of dynamic processes. Water vapor in the microscope chamber takes part in secondary electron detection and charge prevention. Two ESEM modes are available and offer a broad spectrum of applications. The environmental or wet mode prevents sample dehydration by the combination of sample cooling (5°C) and a vapor pressure of 4-6 Torr. In the low vacuum mode, the maximum chamber pressure is limited to 1 Torr (corresponding to about 5% relative humidity in the chamber) and allows the simultaneous use of a backscattered electron detector for imaging material contrast. A selection of characteristic plant samples and various applications are presented as a guide to ESEM for plant scientists. Leaf surfaces, trichomes, epicuticular waxes, and inorganic surface layers represent samples being comparatively resistant to dehydration, whereas callus cells and stigmatic tissue are examples for dehydration- and beam-sensitive samples. The potential of investigating dynamic processes in situ is demonstrated by studying anther opening, by tensile testing of leaves, and by performing hydration/dehydration experiments by changing the vapor pressure. Additionally, automated block-face imaging and serial sectioning using in situ ultramicrotomy is presented. The strengths and weaknesses of ESEM are discussed and it is shown that ESEM is a versatile tool in plant science.

No abstract

Sign-inversion of charging-induced variation of electrical resistance of nanoporous platinum AbstractThe electrical resistance (R) of nanoporous platinum prepared by dealloying reversibly changes by 4% upon electrochemical surface charging in a regime where oxygen adsorption/desorption and surface oxidation/reduction occurs. The variation of R with charging shows a sign inversion.Besides the usual behavior of increasing R with positive charging, a decrease of R occurs at higher potentials. Following recent studies of the sign inversion of the surface stress-charge response of porous nanophase Pt, the sign-inversion of the resistance with charging may be related to the electronic structure of the surface oxide. In addition, a charge-induced variation of the chargecarrier scattering rate at the metal−electrolyte interface is taken into account.

Sodium hypochlorite is widely used to clean/sanitize PES/PVP membranes. However, this strong oxidant is responsible for accelerated polymer ageing, thus impairing PES/PVP membrane lifespan. This work aimed at getting a better understanding of the role of PVP in the degradation of PES/PVP membranes. As the precise chemical composition of commercial membranes is most often unknown, PES/PVP membranes with various PVP to PES ratios (from 0 to 44 wt %) were synthesized and aged dynamically by filtering sodium hypochlorite solutions. PVP oxidization and partial disappearance from the membrane matrix was observed whatever the membrane composition. Moreover, PES-chain scissions were put in evidence even for pure PES membranes, thus highlighting that PES degradation was not systematically related to the presence of PVP. Conversely, PES hydroxylation was observed only for membranes containing PVP, the hydroxylation rate being dependent on the PVP content. Interestingly, the occurrence of PES-chain scissions impacted the membrane

Irradiation damage, caused by the use of beams in the electron microscopes, leads to undesired physical/chemical material property changes or uncontrollable modification of structures that are being processed. Particularly, soft matter such as polymers or biological materials is highly susceptible and very much prone to react on irradiation by electron and ion beams. The effect is even higher when materials are subjected to energetic species such as ions that possess high momentum and relatively low mean path due to their mass. Especially when Ga(+) ions (used as the ion source in Focused Ion Beam (FIB) instruments) are considered, the end-effect might even be the total loss of the material's properties. This paper will discuss the possible types of degradation mechanisms and defect formations that can take place during ion and electron beam irradiation of the conjugated polymers: e.g. polyfluorene (PF) and poly-3-hexylthiophene (P3HT) thin films. For the investigation of the irradiation induced degradation mechanisms in this study, complementary analytical techniques such as Raman Spectroscopy (RS), Infrared Spectroscopy (IR), Electron Energy Loss Spectroscopy (EELS), Atomic Force Microscopy (AFM), and Fluorescence Microscopy including Photoluminescence (PL) and Electroluminescence (EL) Microscopy were applied.