Background:The three-dimensional (3D) bioprinting technology allows creation of 3D constructs in a layer-by-layer fashion utilizing biologically relevant materials such as biopolymers and cells. The aim of this study is to investigate the use of 3D bioprinting in a clinically relevant setting to evaluate the potential of this technique for in vivo chondrogenesis.Methods:Thirty-six nude mice (Balb-C, female) received a 5- × 5- × 1-mm piece of bioprinted cell-laden nanofibrillated cellulose/alginate construct in a subcutaneous pocket. Four groups of printed constructs were used: (1) human (male) nasal chondrocytes (hNCs), (2) human (female) bone marrow–derived mesenchymal stem cells (hBMSCs), (3) coculture of hNCs and hBMSCs in a 20/80 ratio, and (4) Cell-free scaffolds (blank). After 14, 30, and 60 days, the scaffolds were harvested for histological, immunohistochemical, and mechanical analysis.Results:The constructs had good mechanical properties and keep their structural integrity after 60 days of implantation. For both the hNC constructs and the cocultured constructs, a gradual increase of glycosaminoglycan production and hNC proliferation was observed. However, the cocultured group showed a more pronounced cell proliferation and enhanced deposition of human collagen II demonstrated by immunohistochemical analysis.Conclusions:In vivo chondrogenesis in a 3D bioprinted human cell-laden hydrogel construct has been demonstrated. The trophic role of the hBMSCs in stimulating hNC proliferation and matrix deposition in the coculture group suggests the potential of 3D bioprinting of human cartilage for future application in reconstructive surgery.
Cartilage repair and replacement is a major challenge in plastic reconstructive surgery. The development of a process capable of creating a patient-specific cartilage framework would be a major breakthrough. Here, we described methods for creating human cartilage in vivo and quantitatively assessing the proliferative capacity and cartilage-formation ability in mono- and co-cultures of human chondrocytes and human mesenchymal stem cells in a three-dimensional (3D)-bioprinted hydrogel scaffold. The 3D-bioprinted constructs (5 × 5 × 1.2 mm) were produced using nanofibrillated cellulose and alginate in combination with human chondrocytes and human mesenchymal stem cells using a 3D-extrusion bioprinter. Immediately following bioprinting, the constructs were implanted subcutaneously on the back of 48 nude mice and explanted after 30 and 60 days, respectively, for morphological and immunohistochemical examination. During explantation, the constructs were easy to handle, and the majority had retained their macroscopic grid appearance. Constructs consisting of human nasal chondrocytes showed good proliferation ability, with 17.2% of the surface areas covered with proliferating chondrocytes after 60 days. In constructs comprising a mixture of chondrocytes and stem cells, an additional proliferative effect was observed involving chondrocyte production of glycosaminoglycans and type 2 collagen. This clinically highly relevant study revealed 3D bioprinting as a promising technology for the creation of human cartilage.
Bacterial nanocellulose
(BNC) is a 3D network of nanofibrils exhibiting
excellent biocompatibility. Here, we present the aqueous counter collision
(ACC) method of BNC disassembly to create bioink with suitable properties
for cartilage-specific 3D-bioprinting. BNC was disentangled by ACC,
and fibril characteristics were analyzed. Bioink printing fidelity
and shear-thinning properties were evaluated. Cell-laden bioprinted
grid constructs (5 × 5 × 1 mm3) containing human
nasal chondrocytes (10 M mL–1) were implanted in
nude mice and explanted after 30 and 60 days. Both ACC and hydrolysis
resulted in significantly reduced fiber lengths, with ACC resulting
in longer fibrils and fewer negative charges relative to hydrolysis.
Moreover, ACC-BNC bioink showed outstanding printability, postprinting
mechanical stability, and structural integrity. In vivo, cell-laden
structures were rapidly integrated, maintained structural integrity,
and showed chondrocyte proliferation, with 32.8 ± 13.8 cells
per mm2 observed after 30 days and 85.6 ± 30.0 cells
per mm2 at day 60 (p = 0.002). Furthermore,
a full-thickness skin graft was attached and integrated completely
on top of the 3D-bioprinted construct. The novel ACC disentanglement
technique makes BNC biomaterial highly suitable for 3D-bioprinting
and clinical translation, suggesting cell-laden 3D-bioprinted ACC-BNC
as a promising solution for cartilage repair.
Background:Three-dimensional (3D) bioprinting of cartilage is a promising new technique. To produce, for example, an auricle with good shape, the printed cartilage needs to be covered with skin that can grow on the surface of the construct. Our primary question was to analyze if an integrated 3D bioprinted cartilage structure is a tissue that can serve as a bed for a full-thickness skin graft.Methods:3D bioprinted constructs (10 × 10 × 1.2 mm) were printed using nanofibrillated cellulose/alginate bioink mixed with mesenchymal stem cells and adult chondrocytes and implanted subcutaneously in 21 nude mice.Results:After 45 days, a full-thickness skin allograft was transplanted onto the constructs and the grafted construct again enclosed subcutaneously. Group 1 was sacrificed on day 60, whereas group 2, instead, had their skin-bearing construct uncovered on day 60 and were sacrificed on day 75 and the explants were analyzed morphologically. The skin transplants integrated well with the 3D bioprinted constructs. A tight connection between the fibrous, vascularized capsule surrounding the 3D bioprinted constructs and the skin graft were observed. The skin grafts survived the uncovering and exposure to the environment.Conclusions:A 3D bioprinted cartilage that has been allowed to integrate in vivo is a sufficient base for a full-thickness skin graft. This finding accentuates the clinical potential of 3D bioprinting for reconstructive purposes.
The Rai and Binet staging systems are currently being challenged by the development of new biological methods to characterize the prognosis and management of chronic lymphocytic leukemia (CLL). To evaluate these two systems in recently diagnosed CLL patients, we performed a retrospective population-based study including 344 patients in western Sweden diagnosed between 1995 and 2000. Binet stage A patients had longer median overall survival (OS) (100 months) than stage B (55 months; P < 0.001) and C patients (45 months; P < 0.0005). Median OS for stage B and C could not be separated (P = 0.94). When transferring Rai stages into three groups, a similar pattern was found. Overall response differed only between Binet A and C patients and there was no difference regarding time to next treatment between any of the Binet stages. Finally, in both systems, low stage patients had inferior survival compared to age- and sex-matched controls. Our data emphasize the need for a new risk stratification system for CLL patients.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.