Supervised machine learning and its algorithms are a developing trend in the prediction of rockfill material (RFM) mechanical properties. This study investigates supervised learning algorithms support vector machine (SVM), random forest (RF), AdaBoost, and k-nearest neighbor (KNN) for the prediction of the RFM shear strength. A total of 165 RFM case studies with 13 key material properties for rockfill characterization have been applied to construct and validate the models. The performance of the SVM, RF, AdaBoost, and KNN models are assessed using statistical parameters, including the coefficient of determination (R2), Nash–Sutcliffe efficiency (NSE) coefficient, root mean square error (RMSE), and ratio of the RMSE to the standard deviation of measured data (RSR). The applications for the abovementioned models for predicting the shear strength of RFM are compared and discussed. The analysis of the R2 together with NSE, RMSE, and RSR for the RFM shear strength data set demonstrates that the SVM achieved a better prediction performance with (R2 = 0.9655, NSE = 0.9639, RMSE = 0.1135, and RSR = 0.1899) succeeded by the RF model with (R2 = 0.9545, NSE = 0.9542, RMSE = 0.1279, and RSR = 0.2140), the AdaBoost model with (R2 = 0.9390, NSE = 0.9388, RMSE = 0.1478, and RSR = 0.2474), and the KNN with (R2 = 0.6233, NSE = 0.6180, RMSE = 0.3693, and RSR = 0.6181). Furthermore, the sensitivity analysis result shows that normal stress was the key parameter affecting the shear strength of RFM.

The major criteria that control pile foundation design is pile bearing capacity (Pu). The load bearing capacity of piles is affected by the various characteristics of soils and the involvement of multiple parameters related to both soil and foundation. In this study, a new model for predicting bearing capacity is developed using an extreme gradient boosting (XGBoost) algorithm. A total of 200 driven piles static load test-based case histories were used to construct and verify the model. The developed XGBoost model results were compared to a number of commonly used algorithms—Adaptive Boosting (AdaBoost), Random Forest (RF), Decision Tree (DT) and Support Vector Machine (SVM) using various performance measure metrics such as coefficient of determination, mean absolute error, root mean square error, mean absolute relative error, Nash–Sutcliffe model efficiency coefficient and relative strength ratio. Furthermore, sensitivity analysis was performed to determine the effect of input parameters on Pu. The results show that all of the developed models were capable of making accurate predictions however the XGBoost algorithm surpasses others, followed by AdaBoost, RF, DT, and SVM. The sensitivity analysis result shows that the SPT blow count along the pile shaft has the greatest effect on the Pu.

This study examines the potential of the soft computing technique—namely, Gaussian process regression (GPR), to predict the ultimate bearing capacity (UBC) of cohesionless soils beneath shallow foundations. The inputs of the model are width of footing (B), depth of footing (D), footing geometry (L/B), unit weight of sand (γ), and internal friction angle (ϕ). The results of the present model were compared with those obtained by two theoretical approaches reported in the literature. The statistical evaluation of results shows that the presently applied paradigm is better than the theoretical approaches and is competing well for the prediction of UBC (qu). This study shows that the developed GPR is a robust model for the qu prediction of shallow foundations on cohesionless soil. Sensitivity analysis was also carried out to determine the effect of each input parameter.

Recently, research has centered on developing new approaches, such as supervised machine learning techniques, that can compute the mechanical characteristics of materials without investing much effort, time, or money in experimentation. To predict the 28-day compressive strength of steel fiber–reinforced concrete (SFRC), machine learning techniques, i.e., individual and ensemble models, were considered. For this study, two ensemble approaches (SVR AdaBoost and SVR bagging) and one individual technique (support vector regression (SVR)) were used. Coefficient of determination (R2), statistical assessment, and k-fold cross validation were carried out to scrutinize the efficiency of each approach used. In addition, a sensitivity technique was used to assess the influence of parameters on the prediction results. It was discovered that all of the approaches used performed better in terms of forecasting the outcomes. The SVR AdaBoost method was the most precise, with R2 = 0.96, as opposed to SVR bagging and support vector regression, which had R2 values of 0.87 and 0.81, respectively. Furthermore, based on the lowered error values (MAE = 4.4 MPa, RMSE = 8 MPa), statistical and k-fold cross validation tests verified the optimum performance of SVR AdaBoost. The forecast performance of the SVR bagging models, on the other hand, was equally satisfactory. In order to predict the mechanical characteristics of other construction materials, these ensemble machine learning approaches can be applied.

In civil engineering, ultra-high-strength concrete (UHSC) is a useful and efficient building material. To save money and time in the construction sector, soft computing approaches have been used to estimate concrete properties. As a result, the current work used sophisticated soft computing techniques to estimate the compressive strength of UHSC. In this study, XGBoost, AdaBoost, and Bagging were the employed soft computing techniques. The variables taken into account included cement content, fly ash, silica fume and silicate content, sand and water content, superplasticizer content, steel fiber, steel fiber aspect ratio, and curing time. The algorithm performance was evaluated using statistical metrics, such as the mean absolute error (MAE), root mean square error (RMSE), and coefficient of determination (R2). The model’s performance was then evaluated statistically. The XGBoost soft computing technique, with a higher R2 (0.90) and low errors, was more accurate than the other algorithms, which had a lower R2. The compressive strength of UHSC can be predicted using the XGBoost soft computing technique. The SHapley Additive exPlanations (SHAP) analysis showed that curing time had the highest positive influence on UHSC compressive strength. Thus, scholars will be able to quickly and effectively determine the compressive strength of UHSC using this study’s findings.

The following chapter presents a concept of a virtual model of a mine shaft equipped with a hoisting system for the purpose of improving the processes of diagnostics management of shaft infrastructure and its monitoring. The chapter presents a proposal of improvement of broadly known processes such as: diagnostics and monitoring of shaft infrastructure using digital models of 3D structures, the BIM and Digital Twin idea. Implementation of such systems in the operating mine working was presented together with expected results of monitoring. As the presented solution is currently only a concept, development of such system in real application is necessary to asses real benefits of application of Digital Twin system.

The paper presents the results of research concerning the analysis of spatial distribution of detailed geodetic control points in rural areas in Poland. The analysis takes into consideration the relations between the number of geodetic control points and land cover type (built-up, agricultural, and forest) as well as the effective legal regulations in Poland with regard to the issues. The analysis results were referred to geodetic sections classified by the k-means method with respect to the number of the control points and the built-up, agricultural and forest areas. The research indicates that the number of the geodetic control points in an area depends to the extent of 35 % on the type of land cover (building, agricultural and forest land). Having this in mind, the authors recommend taking the land cover into consideration already in the phase of designing a geodetic control network.

No abstract