Thermal gasification is an advanced technology to convert purposefully grown or waste lignocellulosic biomass into calorific gas. Increasing the content of CO and H 2 in the product gas is important for the further use of the gas in technologies for power generation. This article describes the process of gasification and specifies parameters that determine the content of CO and H 2 in the produced gas.
AbstraktTermické zplyňování představuje progresivní technologii pro přeměnu cíleně pěstované či odpadní ligno-celulosové biomasy na výhřevný plyn. Zvýšení obsahu CO a H 2 v ve vyrobeném plynu je důležité pro další využití plynu v technologiích pro výrobu elektrické energie. Článek se zabývá popisem procesu zplyňování a určením parametrů, které určují obsah CO a H 2 ve vyrobeném plynu.
Gasification technology was one of the first large projects of the Energy Research Center at the VSB-Technical University of Ostrava. The beginnings of the technology date back to 2006, when construction of the first version of the gasification plant with an autothermal generator was started. During these years of operation, a lot of testing was conducted on the technology to test different types of fuel (pellets from rice husks, pellets from miscanthus, straw pellets, RDF and many other types of fuels) and various modifications to the technology (testing of two cyclones, dolomite reactor testing, scrubber testing). Subsequently reconstructed gasification technology held tests by RDF fuel, wood pellet and mixtures of these fuels. The tests of the fuel was conducted at three temperatures (750, 850, 950 ° C). Abstrakt Zplyňovací technologie byla jedním z prvních velkých projektů Výzkumného energetického centra na Vysoké škole báňské-Technické univerzitě Ostrava. Počátky technologie se datují k roku 2006, kdy byla zahájena výstavba první verze zplyňovacího zařízení s autotermním generátorem. Během těchto let provozu bylo na technologii prováděno mnoho testů, kdy se zkoušely různé druhy paliv (pelety z rýžových slupek, pelety z miscantusu, pelety ze slámy, RDF a mnoho dalších druhů paliv) a byly prováděny různé úpravy na technologii (zkoušení dvou cyklonů, zkoušení dolomitového reaktoru, zkoušení vymývačky). Následně proběhly na rekonstruované technologii zplyňování testy paliva RDF, dřevěných pelet a směsi těchto paliv. Testy paliv probíhaly ve třech teplotách (750, 850, 950 °C).
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.