RESUMO Neste trabalho a técnica de eletrocoagulação (EC) foi aplicada no tratamento de efluentes de abatedouro de aves. Um planejamento experimental fatorial completo 3³, foi realizado com o intuito de obter os valores ótimos de três variáveis do processo EC (corrente elétrica, pH e tempo de eletrólise). O desempenho foi avaliado pela eficiência da remoção da cor, a turbidez e a demanda química de oxigênio (DQO). As condições ótimas do processo foram obtidas para o pH inicial 8, tempo de eletrólise de 50 min e intensidade de corrente de 2 A. Entre os parâmetros de qualidade avaliados, os valores da cor e turbidez na condição ótima de operação estão de acordo com a legislação brasileira de lançamentos de efluentes líquidos em corpos de água receptores, classe III. Embora houvesse uma boa redução na quantidade inicial de DQO (de 9.252 para 830 mgL-1), esta não possui um limite recomendado pela legislação ambiental em vigor. Contudo, um polimento adicional dentro de um sistema integrado de processos levaria a valores ainda menores. Do ponto de vista do custo operacional e a substancial redução dos poluentes (90-99%), a eletrocoagulação pode ser considerada como uma técnica alternativa e promissora a ser aplicada no tratamento de efluentes de abatedouros de aves.
RESUMO -O objetivo deste trabalho é aplicar o processo de eletrocoagulação (EC), no tratamento de chorume de aterro sanitário. Este é um efluente de alta carga orgânica e que provoca alguns males ambientais, e com isso, processos de tratamento sempre estão sendo investigados. A coleta do efluente bruto foi realizada no aterro sanitário da cidade de Cascavel -Pr. O processo foi realizado em escala laboratorial e para avaliar as melhores condições de processo do sistema, foi aplicado um planejamento experimental 3³ completo. Para realização dos experimentos EC, em batelada, foi utilizado um reator de material plástico com uma capacidade de 2 litros de efluente para ser tratado, provido de uma torneira para fácil escoamento do lodo gerado após o tratamento de EC. Os eletrodos, tipo colmeia, foram confeccionados com placas de ferro, com uma largura de 5 cm, altura de 15 e espessura de 3 mm. A distância entre as 6 placas de ferro foi de 2,5 cm. A eficiência do processo foi avaliada com base na redução de demanda química de oxigênio (DQO), cor e turbidez. Os parâmetros operacionais avaliados no reator de eletrocoagulação foram: o pH inicial, tempo e intensidade de corrente. O processo mostra-se eficiente para o tratamento de chorume, devido a facilidade e baixo custo de operação. A maior eficiência na redução dos poluentes verificada no processo de eletrocoagulação foi de 75, 82 e 60% para turbidez, cor e DQO respectivamente, sendo remoções satisfatórias para o tratamento.Palavras chave: EFICIÊNCIA, REMOÇÃO, PARÂMETROS. INTRODUÇÃOA produção de resíduos está cada vez mais acentuada, e com isso a eliminação deles em aterro sanitário é uma parte importante e essencial em todo mundo.Porém, um dos mais graves problemas ambientais relacionados ao aterro é a geração de lixiviados durante o processo de decomposição pela água da chuva que percolam, atingindo as camadas do solo.O chorume é um líquido escuro, de odor desagradável, contendo alta carga orgânica e inorgânica. A composição química e microbiológica do chorume é bastante
RESUMO Este estudo tem como objetivo avaliar o efeito da rampa de aquecimento sobre o tamanho dos cristalitos formados pós-tratamento térmico, para o CaO PA e para o Ca(OH) 2 PA. Bem como avaliar qual dos produtos usados apresentou maior sensibilidade estrutural em função da rampa de aquecimento. O tratamento térmico do material foi feito utilizando um forno Mufla com rampa de aquecimento ajustável. As estruturas cristalinas do CaO e Ca(OH) 2 pós tratamento térmico foram determinadas por meio da difração de raios-X(DRX). Os resultados do ensaio experimental foram analisados pelas metodologias estatísticas do software Statistic. Neste estudo foi considerado uma variável categórica a espécie química, uma variável quantitativa a rampa de aquecimento e como variável dependente foi avaliada o tamanho dos cristalitos. Pelo resultado da Anova todos os efeitos das variáveis foram estatisticamente significativos. Sendo a rampa de 5 o C/min mais eficiente na produção de cristalitos menores no tratamento térmico do CaO, enquanto que para o tratamento térmico do Ca(OH) 2 a rampa mais eficiente foi de 20 o C/min.
RESUMO-O uso de derivados do petróleo, como fonte de energia tem como agravante a geração de resíduos gasosos, causadores do efeito estufa. Uma alternativa para reduzir a poluição atmosférica é substituir o uso de combustível de origem fóssil pelo combustível renovável, como o biodiesel. Assim o presente trabalho teve como objetivo produzir biodiesel a partir do óleo vegetal de Crambe, via catalise heterogênea através da reação de transesterificação etílica. O percentual de éster etílico produzido foi determinado por cromatografia gasosa, e as fases cristalinas do catalisador foram determinadas por DRX. Por meio do planejamento estatístico fatorial fracionado (3^(3-1)), foi avaliada a influência da temperatura, tempo de reação, e concentração da solução precursora da fase ativa usada na impregnação do suporte, sobre o percentual de éster produzido. Os resultados indicaram maior percentual de éster, em baixa temperatura para tempo elevado e alta temperatura para reduzido tempo de reação.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.