The mechanized harvest of sugar cane (Saccharum officinarum L.) in Brazil is an irreversible trend and it comes with a great concern about the quality of the cane delivered to the industry. A key component to quality is the billet length which affects the processing of raw material, cane deterioration, invisible losses and load density of transport vehicles. Thus, due to the importance of the billet standard in quality and cost of raw material, this study aimed to evaluate if the mechanized harvesting of sugar cane can supply the quality requirements for the crushing process, regarding the billet length. A plot with burnt sugar cane (3.2 ha) and another one with green sugar cane (8.0 ha) were selected to be harvested by two (2) selfpropelled sugar cane harvesters. For each harvested 0.4 ha a sample from each infield wagon was collected. The sample was composed by ten billets. The variability in burnt sugar cane was higher than in green sugar cane, and both harvesters did not present the capacity of keeping the billets with similar lengths when operating either in burnt or green conditions. Key words: mechanization, sugar cane harvester, statistical process control Capacidade do processo de corte de rebolos de cana-de-açúcar colhidos mecanicamente RESUMO: A colheita mecanizada de cana-de-açúcar (Saccharum officinarum L.) no Brasil é uma tendência irreversível e junto a ela vem à preocupação com a qualidade da matéria-prima que chega à indústria. O tamanho de rebolos tem influência nessa qualidade por afetar o processo de deterioração da cana, perdas invisíveis e a densidade de carga no transbordo e transporte. Considerando-se a importância do padrão do rebolo na qualidade e custo da matéria-prima, avaliou-se se a colheita mecanizada de cana-de-açúcar pode atender às exigências de qualidade da moagem no que se refere ao indicador tamanho de rebolo. Para tanto, uma área de cana queimada (3,2 ha) e outra de cana crua (8,0 ha) foram selecionadas. As áreas foram colhidas por duas colhedoras automotrizes. Para cada colhedora e área, uma amostra a cada 0,4 ha colhidos foi coletada, junto ao conjunto de transbordo e cada amostra era composta por dez rebolos. Os resultados foram analisados por meio de gráficos de controle, e a capacidade do processo de corte foi determinada. Houve maior variabilidade na condição de cana queimada em relação à cana crua, e que ambas as colhedoras não têm a capacidade de manter os rebolos em tamanhos semelhantes, quando operando nessas duas condições diferentes. Palavras-chave: mecanização, colheita mecanizada, controle estatístico do processo

RESUMO:As organizações líderes dos mais diferentes setores têm como característica medir o próprio desempenho de modo sistêmico, porém nas empresas agrícolas ainda não é comum o emprego desse conceito, incluindo o setor de mecanização. A mecanização tem um forte impacto na composição dos custos de produção, e conhecer o seu desempenho é primordial para o sucesso de empresa agrícola. A importância que as medidas de desempenho têm no auxílio à gestão e o que a mecanização representa para os custos de produção justificaram o desenvolvimento deste trabalho, que tem como objetivo propor um sistema de medição de desempenho integrado para dar suporte à gestão da mecanização agrícola. A metodologia foi dividida em duas etapas: adaptação de um modelo conceitual sistêmico, com base no Balanced Scorecard -BSC; aplicação do modelo a um estudo de caso na agroindústria canavieira. A adaptação e a aplicação do modelo conceitual permitiu obter indicadores de desempenho de modo sistêmico e associados a: custo e prazo (tradicionalmente utilizados); controle e melhoria na qualidade de operações e processos de apoio; preservação ambiental; segurança, saúde, satisfação, motivação e capacitação de colaboradores; desenvolvimento de sistemas de informação. Conclui-se que o modelo auxiliou na elaboração do sistema de medição de desempenho para a gestão de sistemas mecanizados e que os indicadores permitem uma visão integrada da empresa e associada aos objetivos estratégicos. PALAVRAS-CHAVE: máquinas agrícolas, mecanização agrícola, sistemas de informação, BSC. PROPOSAL OF A PERFORMANCE MEASURING SYSTEM APPLIED TO AGRICULTURAL MECHANIZATION ABSTRACT:The leaders' organizations of several different sectors have as characteristic to measure their own performance in a systematic way. However, this concept is still unusual in agricultural enterprises, including the mechanization sector. Mechanization has an important role on the production costs and to know its performance is a key factor for the agricultural enterprise success. This work was generated by the importance that measurement of performance has for the management and the mechanization impact on the production costs. Its aim is to propose an integrated performance measurement system to give support to agricultural management. The methodology was divided in two steps: adjustment of a conceptual model based on Balanced Score Card -BSC; application of the model in a study case at sugar cane mill. The adjustment and the application of the conceptual model allowed to obtain the performance index in a systematic way, that are associated to: costs and deadline (traditionally used); control and improvement on the quality of operations and support process; environmental preservation; safety; health; employees satisfaction; development of information systems. The adjusted model helped the development of the performance measurement system for the mechanized management systems and the index allows an integrated view of the enterprise, related to its strategic objectives.

ABSTRACT:In order to achieve more efficient agricultural production systems, studies relating to the patterns of influence factors on commercial blocks of outstanding performance can be performed to assist management practices. The performance is considered to be the difference between the yield of a given block and the average yield of the homogeneous group that it belongs to. The methods available to identify these outstanding blocks are usually subjective. The aim of this study was to propose an objective and repeatable approach to identify outstanding performance blocks. The proposed approach consisted of performance determination, using regression trees, and the classification of these blocks by k-means clustering. This approach was illustrated using a sugarcane model. The main factors influencing the tonnes of cane per hectare (TCH) and total recoverable sugar (TRS) yields were found to be crop age and water availability during ripening, respectively. These were used to create potential yield groups, and blocks with high and low performance were identified. The proposed approach was found to be valid in the identification of outstanding sugarcane blocks, and it can be applied to different crops or in the context of precision agriculture.

The objective of this study was to propose models based on the harvest of specific fruit clusters to estimate the plot yield of trials containing fresh market tomato hybrids. Three experiments were conducted at the Experimental Station of Syngenta Crop Protection in the municipality of Holambra, state of São Paulo, Brazil, in 2016 and 2017. The experimental design was randomized complete blocks with 12 genotypes (experiments 1 and 3) and 13 genotypes (experiment 2), with 4 replicates and 10 plants per plot. Multiple linear regression models were fitted (stepwise method) with experiment 1 data (cross-validation), the best models were selected (higher adjusted R²) and then tested with experiments 2 and 3 data by mean of absolute percentage error (MAPE), for the traits mean weight of marketable fruit per plant A (MWA), AA (MWAA), AAA (MWAAA), AA and AAA (MW23A), and the ratio between the market weight and the number of marketable fruits (MFW). The models with four fruit clusters (2, 3, 6 and 9) showed the best balance between prediction capacity and the number of fruit clusters to harvest. The traits MWAA, MW23A and MFW generated reliable predictions, with MAPE approximately 5%. The multiple linear regression can be used to estimate the plot yield what, in the last instance, contributes to the reduction of the costs to conduct fresh market tomato hybrids

Key performance indicators (KPI) are essential to decision-making in an organization, but the approach to analysis and composition used in the formulation of the KPIs can lead to errors. Analysis based only on averages does not allow for discriminating between variations that are natural to the process or special cases which require investigation. The use of control charts can identify this differentiation. However, when several charts are presented encompassing different measurement units and scales, systemic interpretation can be impaired.To assist in this interpretation, this research study aimed at proposing a method to facilitate the analysis of control charts when multiple indicators are employed in the monitoring of agricultural operations. Based on the data obtained over 26 weeks from a mechanized sugarcane (Saccharum officinarum L.) harvesting front, six indicators were defined and analyzed through individual control charts and, systemically, through a standardized group control chart. Resultsshow that the points identified as being outside the control zone (special causes of variation) according to the standardized group control chart were the same as those identified by the six individual charts, which demonstrates the potential of this method to summarize the information with no loss of quality of analysis.

Dissertação apresentada para obtenção do título de Mestre em Agronomia. Área de concentração: Máquinas Agrícolas Piracicaba 2008 À meus pais, Ailton Roberto (in memorian) e Nilce,

Sugarcane mills in Brazil collect a vast amount of data relating to production on an annual basis. The analysis of this type of database is complex, especially when factors relating to varieties, climate, detailed management techniques, and edaphic conditions are taken into account. The aim of this paper was to perform a decision tree analysis of a detailed database from a production unit and to evaluate the actionable patterns found in terms of their usefulness for increasing production. The decision tree revealed interpretable patterns relating to sugarcane yield (R 2 = 0.617), certain of which were actionable and had been previously studied and reported in the literature. Based on two actionable patterns relating to soil chemistry, intervention which will increase production by almost 2 % were suitable for recommendation. The method was successful in reproducing the knowledge of experts of the factors which influence sugarcane yield, and the decision trees can support the decision-making process in the context of production and the formulation of hypotheses for specific experiments.

No abstract