The enzyme-linked immunosorbent assay (ELISA) technique is based on the specific recognition ability of the molecular structure of an antigen (epitope) by an antibody and is likely the most important diagnostic technique used today in bioscience. With this methodology, it is possible to diagnose illness, allergies, alimentary fraud, and even to detect small molecules such as toxins, pesticides, heavy metals, etc. For this reason, any procedures that improve the detection limit, sensitivity or reduce the analysis time could have an important impact in several fields. In this respect, many methods have been developed for improving the technique, ranging from fluorescence substrates to methods for increasing the number of enzyme molecules involved in the detection such as the biotin–streptavidin method. In this context, nanotechnology has offered a significant number of proposed solutions, mainly based on the functionalization of nanoparticles from gold to carbon which could be used as antibody carriers as well as reporter enzymes like peroxidase. However, few works have focused on the study of best practices for nanoparticle functionalization for ELISA enhancement. In this work, we use 20 nm gold nanoparticles (AuNPs) as a vehicle for secondary antibodies and peroxidase (HRP). The design of experiments technique (DOE) and four different methods for biomolecule loading were compared using a rabbit IgG/goat anti-rabbit IgG ELISA model (adsorption, directional, covalent and a combination thereof). As a result, AuNP probes prepared by direct adsorption were the most effective method. AuNPs probes were then used to detect gliadin, one of the main components of wheat gluten, the protein composite that causes celiac disease. With this optimized approach, our data showed a sensitivity increase of at least five times and a lower detection limit with respect to a standard ELISA of at least three times. Additionally, the assay time was remarkably decreased.

No abstract

In our previous work we demonstrated for the first time, to the best of our knowledge, the experimental capability of resonant nanopillars (R-NP) arrays as biochemical transducers. In this Letter, we provide evidence of the capability and suitability of R-NP arrays on a chip to function as label-free optical multiplexed biosensors. R-NP are based on Si₃N₄/SiO₂ Bragg reflectors with a cavity of SiO₂. In order to demonstrate the biosensing performance, R-NP were biofunctionalized by the immobilization of IgG antibodies acting as a bioreceptor. This immobilization was carried out through the silanization of the pillars sensing surface with APTMS (3-aminopropyltrimethoxysilane). R-NP were integrated in eight different sensing arrays on a quartz surface chip. An optical fiber bundle monitored each sensing array vertically and independently after each biofunctionalization step, and subsequently after every recognition event of increasing concentrations of anti-IgGs. The results report a novel multiplexed optical biosensor made of eight sensing arrays on a chip with promising performance and yield.

In this work we demonstrate the advantage of performing the biosensing process of a refractive index optical biosensor under dry conditions, in comparison with the biosensing structure immersed in fluid. We developed a biosensing experiment over a specific transducer based on resonant nanopillars (R-NPs) arrays. The optical interrogation to monitor the recognition events was firstly performed with the R-NPs in dry, only in contact with the air, and secondly with the R-NPs immersed in water. We observed a significant enhance in the sensitivity of the biosensing curve response for the R-NPs in dry conditions, leading an improvement of the Limit of Detection (LoD) in more than one order of magnitude. These results are also in good correlation with 3D-Finite difference time domain simulations carried out for both fluid conditions. According to this result, any interferometric optical bio-transducer for in-situ diagnosis will improve the sensitivity in case it can operate in dry conditions. Moreover, measuring in simple drops of biological samples, in dry conditions, will be a relevant issue for Point of Care Devices.

No abstract

We report the integration of an automated chemical optical sensing unit for the parallel interrogation of 12 BICELLs in a sensing chip. The work was accomplished under the European Project Enviguard (FP7-OCEAN-2013-614057) with the aim of demonstrating an optical nano-biosensing unit for the in-situ detection of various chemical pollutants simultaneously in oceanic waters. In this context, we designed an optical sensing chip based on resonant nanopillars (R-NPs) transducers organized in a layout of twelve biophotonic sensing cells (BICELLs). The sensing chip is interrogated in reflection with a 12-channels optical spectrometer equipped with an embedded computer-on-chip performing image processing for the simultaneous acquisition and analysis (resonant mode fitting) of the 12 spectra. A microfluidic chip and an automated flow control system composed of four pumps and a multi-path micro-valve makes it possible to drive different complex protocols. A rack was designed ad-hoc for the integration of all the modules. As a proof of concept, fluids of different refractive index (RI) were flowed in the system in order to measure the time response (sensogram) of the R-NPs under optical reflectance, and assess the sensors’ bulk sensitivity (285.9 ± 16.4 nm/RIU) and Limit of Detection (LoD) (2.95 × 10−6 RIUS). The real-time response under continuous flow of a sensor chip based on R-NP is showed for the first time, obtaining 12 sensograms simultaneously, featuring the unit as a potential excellent multiplexed detection system. These results indicate the high potential of the developed chemical sensing unit to be used for in-situ, multiplex and automatic optical biosensing.

No abstract

No abstract