No abstract

The aim of this work was to study the adsorption and removal of chromium (VI) ions contained in aqueous solutions using a chitosan-based hydrogel synthesized via chemical crosslinking of radical chitosan, polyacrylic acid, and N,N'-methylenebisacrylamide. Fourier-transform infrared spectroscopy confirmed the hydrogel synthesis and presence of reactive functional groups for the adsorption of chromium (VI) ions. The chromium (VI) adsorption mechanism was evaluated using non-linear Langmuir, Freundlich, Redlich-Peterson, and Sips isotherms, with the best fit found by the non-linear Redlich-Peterson isotherm. The maximum chromium (VI) adsorption capacities of the chitosan-based hydrogel were 73.14 and 93.03 mg metal per g dried hydrogel, according to the non-linear Langmuir and Sips isotherm models, respectively. The best kinetic fit was found with the pseudo-nth order kinetic model. The chromium (VI) removal percentage at pH 4.5 and 100 mg L initial metal concentration was 94.72%. The results obtained in this contribution can be useful for future works involving scale-up of a water and wastewater treatment method from a pilot plant to full-scale plant.

No abstract

No abstract

No abstract

No abstract

The burial of bodies is a potentially polluting activity. Taking this into consideration, the aim of the present study was to verify the compliance of two cemeteries with environmental legislation and to quantify the concentrations of heavy metals in soils affected by burial activities. Physicochemical characterization of the soil was performed by analyzing control samples from areas near the cemeteries. Concentrations of cadmium, lead, chromium, nickel, zinc and copper were determined using high-resolution continuum source atomic absorption spectrometry. The two cemeteries had unsatisfactory properties for the retention of metal cations, with clay percentages ranging from 15.40 to 41.40% and sand percentages ranging from 28.75 to 66.85%. The control samples presented low cation exchange capacity (12.27 to 22.73 cmolc/dm³) and high aluminum (Al3+) saturation (66.74 to 90.16%). Although neither of the two cemeteries had concentrations above the limits established for the metals analyzed by Resolution No. 420/2009 of the National Environment Council, the contaminants may be leaching to groundwater due to inadequate soil characteristics.

The effectiveness of advanced technologies on eliminating antibiotic resistant bacteria (ARB) and resistance genes (ARGs) from wastewaters have been recently investigated. Solar photo-Fenton has been proven effective in combating ARB and ARGs from Municipal Wastewater Treatment Plant effluent (MWWTPE). However, most of these studies have relied solely on cultivable methods to assess ARB removal. This is the first study to investigate the effect of solar photo-Fenton upon ARB and ARGs in MWWTPE by high throughput metagenomic analysis (16S rDNA sequencing and Whole Genome Sequencing). Treatment efficiency upon priority pathogens and resistome profile were also investigated. Solar photo-Fenton (30 mg L −1 of Fe 2+ intermittent additions and 50 mg L −1 of H 2 O 2 ) reached 76–86% removal of main phyla present in MWWTPE. An increase in Proteobacteria abundance was observed after solar photo-Fenton and controls in which H 2 O 2 was present as an oxidant (Fenton, H 2 O 2 only, solar/H 2 O 2 ). Hence, tolerance mechanisms presented by this group should be further assessed. Solar photo-Fenton achieved complete removal of high priority Staphylococcus and Enterococcus , as well as Klebsiella pneumoniae and Pseudomonas aeruginosa . Substantial reduction of intrinsically multi-drug resistant bacteria was detected. Solar photo-Fenton removed nearly 60% of ARGs associated with sulfonamides, macrolides, and tetracyclines, and complete removal of ARGs related to β-lactams and fluoroquinolones. These results indicate the potential of using solar-enhanced photo-Fenton to limit the spread of antimicrobial resistance, especially in developing tropical countries.