BackgroundEfficient bioconversion of lignocellulosic biomass to bioethanol is one of key challenges in the situation of increasing bioethanol demand. The ethanologenic microbes for such conversion are required to possess abilities of utilization of various sugars including xylose and arabinose in lignocellulosic biomass. As required additional characteristics, there are a weak or no glucose repression that allows cells to simultaneously utilize various sugars together with glucose and thermotolerance for fermentation at high temperatures, which has several advantages including reduction of cooling cost. Spathaspora passalidarum ATCC MYA-4345, a type strains, isolated previously have mainly of these abilities or characteristics but its thermotolerance is not so strong and its glucose repression on xylose utilization is revealed.ResultsNewly isolated S. passalidarum CMUWF1–2 was found to have a high ability to produce ethanol from various sugars included in lignocellulosic biomass at high temperatures. The strain achieved ethanol yields of 0.43 g, 0.40 g and 0.20 g ethanol/g xylose at 30 °C, 37 °C and 40 °C, respectively. Interestingly, no significant glucose repression was observed in experiments with mixed sugars, being consistent with the strong resistance to 2-deoxyglucose, and antimycin A showed no effect on its growth in xylose medium. Moreover, the strain was tolerant to glucose and ethanol at concentrations up to 35.0% (w/v) and 8.0% (v/v), respectively.ConclusionsS. passalidarum CMUWF1–2 was shown to achieve efficient production of ethanol from various sugars and a high ethanol yield from xylose with little accumulation of xylitol. The strain also exhibited stress-resistance including thermotolerance and no detectable glucose repression as beneficial characteristics. Therefore, S. passalidarum CMUWF1–2 has remarkable potential for conversion of lignocellulosic biomass to bioethanol.Electronic supplementary materialThe online version of this article (10.1186/s12866-018-1218-4) contains supplementary material, which is available to authorized users.

Bio-based production technologies may complement or replace petroleum-based production of chemicals, but they face a number of technical challenges, including product toxicity and/or water insolubility. Plants and microorganisms naturally biosynthesize chemicals that often are converted into derivatives with reduced toxicity or enhanced solubility. Inspired by this principle, we propose a bioderivatization strategy for biotechnological chemicals production, defined as purposeful biochemical derivatization of intended target molecules. As proof of principle, the effects of hydrophobic (e.g., esterification) and hydrophilic (e.g., glycosylation) bioderivatization strategies on the biosynthesis of a relatively toxic and poorly soluble chemical, 1-octanol, were evaluated in Escherichia coli and Synechocystis sp. PCC 6803. The 1-octanol pathway was first optimized to reach product titers at which the host displayed symptoms of toxicity. Solvent overlay used to capture volatile products partially masked product toxicity. Regardless of whether solvent overlay was used, most strains with bioderivatization had a higher molar product titer and product yield, as well as improved cellular growth and glucose consumption, compared with strains without bioderivatization. The positive effect on bioproduction was observed with both the hydrophobic and hydrophilic strategies. Interestingly, in several combinations of genotype/induction strength, bioderivatization had a positive effect on productivity without any apparent effect on growth. We attribute this to enhanced product solubility in the aqueous or solvent fraction of the bioreactor liquid phase (depending on the derivative and medium used), with consequent enhanced product removal. Overall, under most conditions, a benefit of bioproduction was observed, and the bioderivatization strategy could be considered for other similar chemicals as well.

Heavy metal polluted wastewater from industries is currently one of the major environmental concerns leading to insufficient supply of clean water. Several strategies have been implemented to overcome this challenge including the use of microalgae as heavy metal bio-removers. However, there are still limitations that prevent microalgae to function optimally. Synthetic biology is a new biological discipline developed to solve challenging problems via bioengineering approaches. To date, synthetic biology has no universally affirmed definitions; however, it is uncontroversial that synthetic biology utilizes a constructive library of genetic standardized parts to create new biological systems or to redesign existing ones with improved characteristics. In this mini-review, we present state-of-the-art synthetic biology-based approaches that can be used to enhance heavy metal bio-removal from wastewater effluents by microalgae with a narrative synthetic biology workflow (Design-Build-Test-Learn cycle) to guide future developments of more advanced systems. We also provide insights into potent genes and proteins responsible for the bio-removal processes for stepwise developments of more advanced systems. A total of 49 unique genes and proteins are listed based on their eight heavy metals (Mn, Fe, Cu, Zn, As, Cd, Hg, and Pb) bio-removal functions in transport system, cellular tolerance, synthesis of key players in heavy metal bio-removal, biotransformation of heavy metals, and gene expression regulation. Thus, with our library, genetic parts are ready to be recruited for any synthetic biology-based designs. Thereby, this mini-review identifies potential avenues of future research and maps opportunities to unleash more potential of microalgae as heavy metal bio-removers with synthetic biology.

1-Octanol has gained interest as a chemical precursor for both high and low value commodities including fuel, solvents, surfactants, and fragrances. By harnessing the power from sunlight and CO2 as carbon source, cyanobacteria has recently been engineered for renewable production of 1-octanol. The productivity, however, remained low. In the present work, we report efforts to further improve the 1-octanol productivity. Different N-terminal truncations were evaluated on three thioesterases from different plant species, resulting in several candidate thioesterases with improved activity and selectivity toward octanoyl-ACP. The structure/function trials suggest that current knowledge and/or state-of-the art computational tools are insufficient to determine the most appropriate cleavage site for thioesterases in Synechocystis. Additionally, by tuning the inducer concentration and light intensity, we further improved the 1-octanol productivity, reaching up to 35% (w/w) carbon partitioning and a titer of 526 ± 5 mg/L 1-octanol in 12 days. Long-term cultivation experiments demonstrated that the improved strain can be stably maintained for at least 30 days and/or over ten times serial dilution. Surprisingly, the improved strain was genetically stable in contrast to earlier strains having lower productivity (and hence a reduced chance of reaching toxic product concentrations). Altogether, improved enzymes and environmental conditions (e.g., inducer concentration and light intensity) substantially increased the 1-octanol productivity. When cultured under continuous conditions, the bioproduction system reached an accumulative titer of >3.5 g/L 1-octanol over close to 180 days.

Hydrogen sulfide (H2S) is a toxic and corrosive component that commonly occurs in biogas. In this study, H2S removal from swine-waste biogas using sulfur-oxidizing Paracoccus versutus CM1 immobilized in porous glass (PG) and polyurethane foam (PUF) biofilters was investigated. Bacterial compositions in the biofilters were also determined using polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE). The biofilters were first tested on a laboratory scale under three space velocities (SV): 20, 30, and 40 h−1. Within 24 h, at an SV of 20 h−1, PG and PUF biofilters immobilized with P. versutus CM1 removed 99.5% and 99.7% of H2S, respectively, corresponding to the elimination capacities (EC) of 83.5 and 86.2 gm−3 h−1. On a pilot scale, with the horizontal PG-P. versutus CM1 biofilter operated at an SV of 30 h−1, a removal efficiency of 99.7% and a maximum EC of 113.7 gm−3 h−1 were achieved. No reduction in methane content in the outlet biogas was observed under these conditions. The PCR-DGGE analysis revealed that Paracoccus, Acidithiobacillus, and Thiomonas were the predominant bacterial genera in the biofilters, which might play important roles in H2S removal. This PG–P. versutus CM1 biofiltration system is highly efficient for H2S removal from swine-waste biogas.