The escape of fish from aquaculture is perceived as a threat to wild fish populations. The escapes problem is largely caused by technical and operational failures of fish farming equipment. In Norway ), despite the total number of salmon held in sea-cages increasing by 44% during this period. No similar decrease in escaped cod has occurred, suggesting that other measures, such as improved netting materials for sea-cages, are required. In addition to escaping as juveniles or adults, cod may reproduce in seacages, and thus fertilised eggs escape to the environment. The ecological effects of 'escape through spawning' are unclear, and methods to inhibit escape by this mechanism are being explored. To prevent escapes of juvenile and adult fish as sea-cage aquaculture industries develop, we recommend that policy-makers implement a 5 component strategy: (1) establish mandatory reporting of all escape incidents; (2) establish a mechanism to analyse and learn from the mandatory reporting; (3) conduct mandatory, rapid, technical assessments to determine the causes of escape incidents involving more than 10 000 fish; (4) introduce a technical standard for sea-cage aquaculture equipment coupled with an independent mechanism to enforce the standard; and (5) conduct mandatory training of fish farm staff in escape-critical operations and techniques.

No abstract

As part of an EU funded 7th Framework project, Prevent Escape, a programme of research was undertaken to document the extent, size and knowledge of the causes of escapes from marine fin fish farms in Europe over a three year period. Escape incidents were identified and assessed through questionnaires across the 6 countries (Ireland, UK, Norway, Spain, Greece, and Malta), and other data supplied by the Norwegian Fisheries Directorate and the Scottish Aquaculture Research Forum. A total of 8,922,863 fish were reported to have escaped from 242 incidents. Of these over 5 million occurred in two catastrophic escape incidents. Sea bream accounted for the highest number of escapes at 76.7% followed by Atlantic salmon at 9.2%. Of the 113 Atlantic salmon escape events, almost 75% were due to structure failure or operational error. Almost 50% of cod escape incidents were due to biological causes e.g. biting of nets. The nominal costs of escapes as calculated by value at point of first sale were very substantial, estimated at approximately €47.5 million per annum on average over the study period. Of this €42.8 million was for annual cost of losses of sea bass and sea bream in the Mediterranean and €4.7 million for losses of salmon in northern Europe.peer-reviewe

No abstract

Biofouling is a serious problem in marine aquaculture and it has a number of negative impacts including increased forces on aquaculture structures and reduced water exchange across nets. This in turn affects the behavior of fish cages in waves and currents and has an impact on the water volume and quality inside net pens. Even though these negative effects are acknowledged by the research community and governmental institutions, there is limited knowledge about fouling related effects on the flow past nets, and more detailed investigations distinguishing between different fouling types have been called for. This study evaluates the effect of hydroids, an important fouling organism in Norwegian aquaculture, on the forces acting on net panels. Drag forces on clean and fouled nets were measured in a flume tank, and net solidity including effect of fouling were determined using image analysis. The relationship between net solidity and drag was assessed, and it was found that a solidity increase due to hydroids caused less additional drag than a similar increase caused by change in clean net parameters. For solidities tested in this study, the difference in drag force increase could be as high as 43% between fouled and clean nets with same solidity. The relationship between solidity and drag force is well described by exponential functions for clean as well as for fouled nets. A method is proposed to parameterize the effect of fouling in terms of an increase in net solidity. This allows existing numerical methods developed for clean nets to be used to model the effects of biofouling on nets. Measurements with other types of fouling can be added to build a database on effects of the accumulation of different fouling organisms on aquaculture nets.

No abstract

No abstract

This study investigates the effects of changes in flow speed and angle of attack on drag and lift forces on nets with bending stiffness. Today most fish cage nets are made from nylon, but new cage materials are proposed in order to improve the stability of cages in currents and waves, to reduce biofouling, prevent escapes, and to secure fish from preda tor attacks. The use of some of these materials leads to nets with bending stiffness in at least one direction. However, not much is known about the performance of such nets in currents and waves. In this study, three different nets with bending stiffness were tested together with nylon nets. Net panels were subjected to different flow speeds at different angles between flow direction and net plane, and the forces on the nets were measured with a multi-axis force!torque sensor system. Based on the experiments, drag, and lift coefficients were determined for the different net materials and compared to existing theory with which they are in reasonably good agreement for the nets with low solidity. However, for nets with higher solidity the results are significantly lower than the drag and lift coefficients provided other authors. Also, the change of drag coefficient with changing flow speed and angle of attack was different for a monofilament and a multifilament net with similar solidity and aperture form and size. These differences may partly be due to differences in twine structures and net construction between the monofilament and multifilament net and between nets used by other authors and in the present study.