Lattice structures offer great benefits when employed in medical implants for cell attachment and growth (osseointegration), minimization of stress shielding phenomena, and weight reduction. This study is focused on a proof of concept for developing a generic shoulder hemi-prosthesis, from a patient-specific case of a 46 years old male with a tumor on the upper part of his humerus. A personalized biomodel was designed and a lattice structure was integrated in its middle portion, to lighten weight without affecting humerus’ mechanical response. To select the most appropriate lattice structure, three different configurations were initially tested: Tetrahedral Vertex Centroid (TVC), Hexagonal Prism Vertex Centroid (HPVC), and Cubic Diamond (CD). They were fabricated in resin by digital light processing and its mechanical behavior was studied via compression testing and finite element modeling (FEM). The selected structure according to the results was the HPVC, which was integrated in a digital twin of the biomodel to validate its mechanical performance through FEM but substituting the bone material model with a biocompatible titanium alloy (Ti6Al4V) suitable for prostheses fabrication. Results of the simulation showed acceptable levels of Von Mises stresses (325 MPa max.), below the elastic limit of the titanium alloys, and a better response (52 MPa max.) in a model with equivalent elastic properties, with stress performance in the same order of magnitude than the showed in bone’s material model.
Up to date, most metalworking fluids (MWFs) are emulsions made of petroleum-derived oil bases and sodium petroleum sulphonate emulsifiers. They are not readily biodegradable, and their waste is hazardous for users and the environment. Therefore, green MWFs are required for achieving cleaner production processes. Recently, various MWFs have been developed using vegetable oil bases to meet biodegradability to some extent. However, the emulsifier has been scarcely replaced by a green product. This research aims to produce and evaluate Pickering emulsions made of Jatropha oil (JO) and partially deacetylated and fibrillated chitin (PDFC) as emulsifiers at different concentrations. JO is a non-edible biodegradable oil with remarkable lubricity properties, while PDFC is produced by extracting chitin from waste heads and shells of the shrimp species Litopenaeus vannameii, followed by partial deacetylation and further fibrillation, which improves wettability and stabilization. The prepared emulsions were characterized in terms of creaming index and size of emulsion droplets and evaluated as MWFs in actual turning operations of AISI 1018 steel bars via minimum quantity lubrication (MQL) technique. The findings suggest PDFC as a potential eco-friendly emulsifier to form green MWFs with acceptable stability generating low cutting forces and significant workpiece finishing and chips quality.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.