Industry 4.0 is fast becoming a mainstream goal, and many companies are lining up to join the Fourth Industrial Revolution. Small and medium-sized enterprises, especially in the manufacturing industry, are the most heavily challenged in adopting new technology. One of the reasons why these enterprises are lagging behind is the motivation of the key personnel, the decision-makers. The factories in question often do not have a pressing need for advancing to Industry 4.0 and are wary of the risk in doing so. The authors present a rapid, low-cost prototyping solution for the manufacturing companies with legacy machinery intending to adopt the Industry 4.0 paradigm with a low-risk initial step. The legacy machines are retrofitted through the Industrial Internet of Things, making these machines both connectable and capable of providing data, thus enabling process monitoring. The machine chosen as the digitization target was not connectable, and the retrofit was extensive. The choice was made to present the benefits of digitization to the stakeholders quickly and effectively. Indeed, the solution provides immediate results within manufacturing industrial settings, with the ultimate goal being the digital transformation of the entire factory. This work presents an implementation cycle for digitizing an industrial broaching machine, supported by state-of-the-art literature analysis. The methodology utilized in this work is based on the well-known DMAIC strategy customized for the specifics of this case study.

Vegetable transplanting is an important and advantageous practice in vegetables production systems. In recent years, the development of vegetable transplanting tools has increased, as well as the interest for automatic and robotic transplanters. However, at present, the feeding of transplanting machines is often still performed by hand. This paper presents the design, development and testing of a needle gripper and a two-finger gripper for vegetable transplanting. Both grippers were self-designed and tested for picking, lifting and transplanting plug seedlings. Tests have been conducted on fennel (Foeniculum vulgare L.), leek (Allium ampeloprasum L.) chicory (Cichorium intybus L.) and lettuce (Lactuca sativa L.) seedlings to determine the impact that gripper typology might have on the further growth of plants after transplanting. The average success rate of the two-finger gripper in the transplanting experiment was 95% and of the needle gripper 81.75%, respectively. Although neither gripper typology affected the growth of the seedlings after transplanting, several design implications were identified in order to improve the performance of both grippers. Furthermore, the two-finger gripper is more reliable for lettuce and chicory, while the needle gripper requires root plugs with higher firmness and cohesion to prevent shattering.

No abstract

While attracting increasing research attention in science and technology, Machine Learning (ML) is playing a critical role in the digitalization of manufacturing operations towards Industry 4.0. Recently, ML has been applied in several fields of production engineering to solve a variety of tasks with different levels of complexity and performance. However, in spite of the enormous number of ML use cases, there is no guidance or standard for developing ML solutions from ideation to deployment. This paper aims to address this problem by proposing an ML application roadmap for the manufacturing industry based on the state-of-the-art published research on the topic. First, this paper presents two dimensions for formulating ML tasks, namely, ’Four-Know’ (Know-what, Know-why, Know-when, Know-how) and ’Four-Level’ (Product, Process, Machine, System). These are used to analyze ML development trends in manufacturing. Then, the paper provides an implementation pipeline starting from the very early stages of ML solution development and summarizes the available ML methods, including supervised learning methods, semi-supervised methods, unsupervised methods, and reinforcement methods, along with their typical applications. Finally, the paper discusses the current challenges during ML applications and provides an outline of possible directions for future developments.

Smart surfaces are becoming more and more popular in the field of intralogistics, as they combine great flexibility with easy reprogrammability. Pursuing this trend, the following article proposes a modular surface to perform handling tasks, such as sorting, stopping, or slowing down material flows. Differently from the current technology, the surface used is under-actuated, thus, it exploits the speed, already possessed by the object, or the gravity to perform, with a simplified hardware, for the aforementioned tasks. In practice, these handling actions are completed using an array of rotors, of which only the direction of the rotation axis is controlled. Moreover, the axis can only assume certain discrete orientations in the plane, further simplifying the design. Thus, what is created is a controllable and under-actuated friction field, which, in contrast with similar existing systems, does not require active driving forces to manipulate the material flow. In the article, the analytic model of the surface is described, and a software simulation environment is introduced to demonstrate its functioning. In addition, examples of sorting, slowing down, and stopping operations and a validation of the simulation itself are presented.