Abstract. The number of patients with diabetes increases annually. Modern forecasts predict that diabetes will be the seventh leading cause of death in 2030. Despite many significant advances in the research of diabetes and the use of new modern treatments, the disease is still progressing, and it is necessary to continue to study the effects of diabetes on human systems and organs: kidney and myocardium. Methods. A total of 24 rats of reproductive age (6 months old) were involved in this experimental study. Experimental rats were injected with alloxan intraperitoneally once at a dose of 20 mg/100 g on an empty stomach. In addition, they received a 10% glucose solution 24 hours after alloxan injection and a 5% glucose solution during the experiment. We measured glucose level with Accu-Chek Advantage (Boehringer, Germany) after 2, 12, and 24 hours after alloxan injection, and then weekly. The subjects of the investigation were kidney and heart of the experimental (n=12) and control (n=12) animals for correct comparative analysis. Results. The average blood glucose level remained at 11 mmol/L ± 2 mmol/L. During the experimental period, the rats' weight gain, dilation of both ventricles and relative renal weight gain were determined. By the histological examination of the myocardium, we revealed polymorphic nuclei, perinuclear cytolysis, fragmentation, wavy-like deformation of cardiomyocytes, stromal and perivascular edema, uneven filling of blood vessels, and local fibrosis. Thinning of fibrous capsule and cortical layer, destruction of nephrons, and hemorrhages were detected in the kidney. Conclusions. Our study confirms the robustness of alloxan-induced hyperglycemia in rats. We came to this conclusion because the early changes in the kidneys and heart are explained by the development of microangiopathies, which is a typical feature of the pathogenesis of diabetes. With prolonged exposure to chronic hyperglycemia, structural disorders of vital organs are worsened. This experimental model could be used for conducting comprehensive research aimed to study the mechanisms of diabetes mellitus, the effects of hyperglycemia on organs and tissues, and correct the complications.
About 422 million people in the world suffer from diabetes mellitus. Among diseases, diabetes ranks third, and among endocrine disorders, it ranks first. Some issues concerning the pathogenesis of this disease are unclear. The main reason for diabetes damage is high blood glucose levels. Hyperglycaemia has a toxic effect on the vessels of the kidneys. The present study aims to investigate the impact of alloxan-induced diabetes mellitus on the remodeling of the renal cortex. Materials and methods. We divided twenty-four mature white male rats into the control and experimental groups. We administered alloxan to experimental animals intraperitoneally at a single dose of 40 mg/kg. Blood glucose levels were measured 2, 12, and 24 hours after injection of alloxan and then weekly. The average glucose level remained 11.0 ± 2.0 mmol/l. Animals were sacrificed on days 14, 21, and 45. We stained histological preparations of kidneys with hematoxylin and eosin. The selected dose of alloxan and the method of its administration caused persistent hyperglycemia in rats and did not lead to their death. Results. On the 14th day, the diseased kidney had a thickening of the glomerular capillary walls. Nephrons had a spherical shape with a slightly uneven surface. On the 21st day of the observation, it was more difficult to distinguish the cortex from the medulla. On the 45th day, the distal tubules lost their usual shape, became thinner, and were difficult to distinguish from other tubules by histological preparation. The cortex became spongy due to cystic dilation of the tubules. Conclusions. All components of the renal cortex underwent daily changes. At the early stages of the experiment, it looked much denser compared to the cortical layer of the kidneys of animals in the control group. The number of subcapsular nephrons visually increased, and the renal capsule thickened. In the later period of the experiment, dilatation and blood fullness of glomerular capillary with their leukocyte infiltration were observed. In addition, there was a cystic expansion of the tubules, due to which the cortical layer of the kidney looked like a sponge.
Сумський державний університет Резюме. У статті опрацьовано та докладно розглянуто сучасний літературний матеріал стосовно ролі води в організмі та дегідратаційних порушень водного балансу, а саме: детально описані позаклітинний (ізота гіпоосмолярний), внутрішньоклітинний (гіперосмо-лярний) та загальний (як наслідок першого і другого варіантів) види зневоднення.
Калюжний В. Л., Ярмоленко О. С., Малій Х. В. Гаряче штампування сталевих порожнистих виробів з інтенсивною пластичною деформацією стінки та донної частини. Oбробка матеріалів тиском. 2020. № 1 (50). С. 98-103. Приведені результати моделювання методом скінченних елементів процесу гарячого штампування порожнистого виробу з маловуглецевої сталі з інтенсивним пропрацюванням пластичною деформацією стінки і донної частини для набуття необхідних механічних властивостей. Штампування складається з двох переходів, які реалізовані на одному пресі. На першому переході зворотним видавлюванням отриманий порожнистий напівфабрикат з виступами на донній частині з боку порожнини і на нижньому торці цієї частини. На другому переході витягуванням із потоншенням через дві послідовно розташовані матриці і доштампуванням донної частини отримані кінцеві форма і розміри виробу з фланцем. Визначені швидкість деформування і підігрівання деформуючого інструменту, які забезпечили температурний інтервал гарячого штампування упродовж виконання двох переходів. На кожному переходу встановлені зусилля деформації, розподіл питомих зусиль на деформуючому інструменті для вибору обладнання і проектування штампового оснащення. Пропрацювання структури металу пластичною деформацією оцінене за величиною інтенсивності деформацій. Встановлені ступені деформації для здійснення витягування із потоншенням без руйнування в послідовно розташованих матрицях. Приведені розподіли температури здеформованого металу після видавлювання, витягування в першій і другій матрицях. Показані розподіли інтенсивності деформацій у напівфабрикаті після видавлювання, в результаті виконання витягування в першій і другій матрицях, а також у виробі після доштампування донної частини. Відмічений більш рівномірний розподіл інтенсивності деформацій по ширині стінки в результаті витягування із потоншенням. Виявлені кінцеві форма і розміри виробу.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.