No abstract

Electrically driven subwavelength scale metallo-dielectric pedestal pillar lasers are designed and experimentally demonstrated. The metallo-dielectric cavity significantly enhances the quality factor (Q > 1500) of the wavelength and subwavelength scale lasers and the pedestal structure significantly reduces the threshold gain (< 400 cm(-1)) which can potentially enable laser operation at room temperature. We observed continuous wave lasing in 750 nm gain core radius laser at temperatures between 77 K and 140 K with a threshold current of 50 μA (at 77 K). We also observed lasing from a 355 nm gain core radius laser at temperatures between 77 K and 100 K.

An etch-free fabrication technique for creating low loss silicon waveguides in the silicon-on-insulator material system is proposed and demonstrated. The approach consists of local oxidation of a silicon-on-insulator chip covered with a e-beam patterned hydrogen silsesquioxane mask. A single oxidation step converts hydrogen silsesquioxane to a glass-like compound and simultaneously defines the waveguides, bypassing the need for any wet or dry etching steps. The spectral response of ring resonators fabricated using this technique was used to characterize the waveguide losses. Intrinsic Q-factors as high as 1.57 × 10(6), corresponding to a waveguide loss of 0.35 dB/cm, were measured.

Abstract:As the field of semiconductor nanolasers becomes mature in terms of both the miniaturization to the true sub-wavelength scale, and the realization of room temperature devices, the integrated treatment of multiple design aspects beyond pure electromagnetic consideration becomes necessary to further advance the field. In this review, we focus on one such design aspect: temperature effects in nanolasers. We summarize recent efforts in understanding the interplay of various temperaturedependent parameters, and study their effects on optical mode and emission characteristics. Building on this knowledge, nanolasers with improved thermal performance can be designed, and their performance evaluated. Although this review focuses on metal-clad semiconductor lasers because of their suitability for dense chip-scale integration, these thermal considerations also apply to the broader field of nanolasers.

Metal-clad subwavelength lasers have recently become excellent candidates for light sources in densely packed chip-scale photonic circuits. In this review, we summarize recent research efforts in the theory, design, fabrication, and characterization of such lasers. We detail advancements of both the metallodielectric and the coaxial type lasers: for the metallo-dielectric type, we discuss operation with both optical pumping and electrical pumping. For the coaxial type, we discuss operation with all spontaneous emission coupled into the lasing mode, as well as the smallest metal-clad lasers to date operating at room temperature. A formal treatment of the Purcell effect, the modification of the spontaneous emission rate by a subwavelength cavity, is then presented to assist in better understanding the quantum effects in these nanoscale semiconductor lasers. This formalism is developed for the transparent medium condition, using the emitter-field-reservoir model in the quantum theory of damping. We show its utility through the analysis and design of subwavelength lasers. Finally, we discuss future research directions toward high-efficiency nanolasers and potential applications, such as creating planar arrays of uncoupled lasers with emitter densities near the resolution limit.