The structural kinetics of surface events on a Pt 3 Co/C cathode catalyst in a polymer electrolyte fuel cell (PEFC) was investigated by operando time-resolved X-ray absorption fine structure (XAFS) with a time resolution of 500 ms. The rate constants of electrochemical reactions, the changes in charge density on Pt, and the changes in the local coordination structures of the Pt 3 Co alloy catalyst in the PEFC were successfully evaluated during fuel-cell voltage-operating processes. Significant time lags were observed between the electrochemical reactions and the structural changes in the Pt 3 Co alloy catalyst. The rate constants of all the surface events on the Pt 3 Co/C catalyst were significantly higher than those on the Pt/ C catalyst, suggesting the advantageous behaviors (cell performance and catalyst durability) on the Pt 3 Co alloy cathode catalyst.

Simultaneous improvements in oxygen reduction reaction (ORR) activity and long-term durability of Ptbased cathode catalysts are indispensable for the development of next-generation polymer electrolyte fuel cells but are still a major dilemma. We present a robust octahedral core−shell PtNi x /C electrocatalyst with high ORR performance (mass activity and surface specific activity 6.8−16.9 and 20.3−24.0 times larger than those of Pt/C, respectively) and durability (negligible loss after 10000 accelerated durability test (ADT) cycles). The key factors of the robust octahedral nanostructure (core−shell Pt 73 Ni 27 /C) responsible for the remarkable activity and durability were found to be three continuous Pt skin layers with 2.0−3.6% compressive strain, concave facet arrangements (concave defects and high coordination), a symmetric Pt/Ni distribution, and a Pt 67 Ni 33 intermetallic core, as found by STEM-EDS, in situ XAFS, XPS, etc. The robust core−shell Pt 73 Ni 27 /C was produced by the partial release of the stress, Pt/Ni rearrangement, and dimension reduction of an as-synthesized octahedral Pt 50 Ni 50 /C with 3.6−6.7% compressive Pt skin layers by Ni leaching during the activation process. The present results on the tailored synthesis of the PtNi x structure and composition and the better control of the robust catalytic architecture renew the current knowledge and viewpoint for instability of octahedral PtNi x /C samples to provide a new insight into the development of next-generation PEFC cathode catalysts. KEYWORDS: robust octahedral core−shell PtNi x /C electrocatalyst, polymer electrolyte fuel cell, high performance and durability, continuous, compressive and concave Pt skin layers, structural and electronic property, in situ XAFS/STEM-EDS/XPS/ICP-AES

The three-dimensional (3D) distribution and oxidation state of a Pt cathode catalyst in a practical membrane electrode assembly (MEA) were visualized in a practical polymer electrolyte fuel cell (PEFC) under fuel-cell operating conditions. Operando 3D computed-tomography imaging with X-ray absorption near edge structure (XANES) spectroscopy (CT-XANES) clearly revealed the heterogeneous migration and degradation of Pt cathode catalyst in an MEA during accelerated degradation test (ADT) of PEFC. The degradative Pt migration proceeded over the entire cathode catalyst layer and spread to MEA depth direction into the Nafion membrane.

In situ time-resolved X-ray absorption fine structure spectra of Pt/C, Pt3Co/C, and Pt3Ni/C cathode electrocatalysts in membrane electrode assemblies (catalyst loading: 0.5 mgmetal cm–2) were successfully measured every 100 ms for a voltage cycling process between 0.4 and 1.0 V. Systematic analysis of in situ time-resolved X-ray absorption near-edge structure and extended X-ray absorption fine structure spectra in the molecular scale revealed the structural kinetics of the Pt and Pt3M (M = Co, Ni) bimetallic cathode catalysts under polymer electrolyte fuel cell operating conditions, and the rate constants of Pt charging, Pt–O bond formation/breaking, and Pt–Pt bond breaking/re-formation relevant to the fuel cell performances were successfully determined. The addition of the 3d transition metals to Pt reduced the Pt oxidation state and significantly enhanced the reaction rates of Pt discharging, Pt–O bond breaking, and Pt–Pt bond re-forming in the reductive process from 1.0 to 0.4 V.

We have achieved significant improvements for the oxygen reduction reaction activity and durability with new SnO2-nanoislands/Pt3Co/C catalysts in 0.1 M HClO4, which were regulated by a strategic fabrication using a new selective electrochemical Sn deposition method. The nano-SnO2/Pt3Co/C catalysts with Pt/Sn = 4/1, 9/1, 11/1, and 15/1 were characterized by STEM-EDS, XRD, XRF, XPS, in situ XAFS, and electrochemical measurements to have a Pt3Co core/Pt skeleton-skin structure decorated with SnO2 nanoislands at the compressive Pt surface with the defects and dislocations. The high performances of nano-SnO2/Pt3Co/C originate from efficient electronic modification of the Pt skin surface (site 1) by both the Co of the Pt3Co core and surface nano-SnO2 and more from the unique property of the periphery sites of the SnO2 nanoislands at the compressive Pt skeleton-skin surface (more active site 2), which were much more active than expected from the d-band center values. The white line peak intensity of the nano-SnO2/Pt3Co/C revealed no hysteresis in the potential up-down operations between 0.4 and 1.0 V versus RHE, unlike the cases of Pt/C and Pt3Co/C, resulting in the high ORR performance. Here we report development of a new class of cathode catalysts with two different active sites for next-generation polymer electrolyte fuel cells.

We have made the first success in the same-view imagings of 2D nano-XAFS and TEM/STEM-EDS under a humid N2 atmosphere for Pt/C cathode catalyst layers in membrane electrode assemblies (MEAs) of polymer electrolyte fuel cells (PEFCs) with Nafion membrane to examine the degradation of Pt/C cathodes by anode gas exchange cycles (start-up/shut-down simulations of PEFC vehicles). The same-view imaging under the humid N2 atmosphere provided unprecedented spatial information on the distribution of Pt nanoparticles and oxidation states in the Pt/C cathode catalyst layer as well as Nafion ionomer-filled nanoholes of carbon support in the wet MEA, which evidence the origin of the formation of Pt oxidation species and isolated Pt nanoparticles in the nanohole areas of the cathode layer with different Pt/ionomer ratios, relevant to the degradation of PEFC catalysts.

We have succeeded in simultaneous operando time-resolved quick X-ray absorption fine structure (QXAFS)–X-ray diffraction (XRD) measurements at each acquisition time of 20 ms for a Pt/C cathode catalyst in a polymer electrolyte fuel cell (PEFC), while measuring the current/charge of the PEFC during the transient voltage cyclic processes (0.4 VRHE → 1.4 VRHE → 0.4 VRHE) under H2(anode)–N2(cathode). The rate constants for Pt–O bond formation/dissociation, Pt charging/discharging, Pt–Pt bond dissociation/reformation, and decrease/increase of Pt metallic-phase core size under the transient potential operations were determined by the combined time-resolved QXAFS–XRD technique. The present study provides a new insight into the transient-response reaction mechanism and structural transformation in the Pt surface layer and bulk, which are relevant to the origin of PEFC activity and durability as key issues for the development of next-generation PEFCs.

We performed in situ hard X-ray photoelectron spectroscopy (HAXPES) measurements of the electronic states of platinum nanoparticles on the cathode electrocatalyst of a polymer electrolyte fuel cell (PEFC) using a near ambient pressure (NAP) HAXPES instrument having an 8 keV excitation source. We successfully observed in situ NAP-HAXPES spectra of the Pt/C cathode catalysts of PEFCs under working conditions involving water, not only for the Pt 3d states with large photoionization cross-sections in the hard X-ray regime but also for the Pt 4f states and the valence band with small photoionization cross-sections. Thus, this setup allowed in situ observation of a variety of hard PEFC systems under operating conditions. The Pt 4f spectra of the Pt/C electrocatalysts in PEFCs clearly showed peaks originating from oxidized Pt(ii) at 1.4 V, which unambiguously shows that Pt(iv) species do not exist on the Pt nanoparticles even at such large positive voltages. The water oxidation reaction might take place at that potential (the standard potential of 1.23 V versus a standard hydrogen electrode) but such a reaction should not lead to a buildup of detectable Pt(iv) species. The voltage-dependent NAP-HAXPES Pt 3d spectra revealed different behaviors with increasing voltage (0.6 → 1.0 V) compared with decreasing voltage (1.0 → 0.6 V), showing a clear hysteresis. Moreover, quantitative peak-fitting analysis showed that the fraction of non-metallic Pt species matched the ratio of the surface to total Pt atoms in the nanoparticles, which suggests that Pt oxidation only takes place at the surface of the Pt nanoparticles on the PEFC cathode, and the inner Pt atoms do not participate in the reaction. In the valence band spectra, the density of electronic states near the Fermi edge reduces with decreasing particle size, indicating an increase in the electrocatalytic activity. Additionally, a change in the valence band structure due to the oxidation of platinum atoms was also observed at large positive voltages. The developed apparatus is a valuable in situ tool for the investigation of the electronic states of PEFC electrocatalysts under working conditions.