With mounting concerns over climate change, the utilisation or conversion of carbon dioxide into sustainable, synthetic hydrocarbons fuels, most notably for transportation purposes, continues to attract worldwide interest. This is particularly true in the search for sustainable or renewable aviation fuels. These offer considerable potential since, instead of consuming fossil crude oil, the fuels are produced from carbon dioxide using sustainable renewable hydrogen and energy. We report here a synthetic protocol to the fixation of carbon dioxide by converting it directly into aviation jet fuel using novel, inexpensive iron-based catalysts. We prepare the Fe-Mn-K catalyst by the so-called Organic Combustion Method, and the catalyst shows a carbon dioxide conversion through hydrogenation to hydrocarbons in the aviation jet fuel range of 38.2%, with a yield of 17.2%, and a selectivity of 47.8%, and with an attendant low carbon monoxide (5.6%) and methane selectivity (10.4%). The conversion reaction also produces light olefins ethylene, propylene, and butenes, totalling a yield of 8.7%, which are important raw materials for the petrochemical industry and are presently also only obtained from fossil crude oil. As this carbon dioxide is extracted from air, and re-emitted from jet fuels when combusted in flight, the overall effect is a carbon-neutral fuel. This contrasts with jet fuels produced from hydrocarbon fossil sources where the combustion process unlocks the fossil carbon and places it into the atmosphere, in longevity, as aerial carbon - carbon dioxide.

Earth-abundant transition metal phosphides are promising materials for energy-related applications. Specifically, copper­(I) phosphide is such a material and shows excellent photocatalytic activity. Currently, there are substantial research efforts to synthesize well-defined metal–semiconductor nanoparticle heterostructures to enhance the photocatalytic performance by an efficient separation of charge carriers. The involved crystal facets and heterointerfaces have a major impact on the efficiency of a heterostructured photocatalyst, which points out the importance of synthesizing potential photocatalysts in a controlled manner and characterizing their structural and morphological properties in detail. In this study, we investigated the interface dynamics occurring around the synthesis of Ag–Cu3P nanoparticle heterostructures by a chemical reaction between Ag–Cu nanoparticle heterostructures and phosphine in an environmental transmission electron microscope. The major product of the Cu–Cu3P phase transformation using Ag–Cu nanoparticle heterostructures with a defined interface as a template preserved the initially present Ag{111} facet of the heterointerface. After the complete transformation, corner truncation of the faceted Cu3P phase led to a physical transformation of the nanoparticle heterostructure. In some cases, the structural rearrangement toward an energetically more favorable heterointerface has been observed and analyzed in detail at the atomic level. The herein-reported results will help better understand dynamic processes in Ag–Cu3P nanoparticle heterostructures and enable facet-engineered surface and heterointerface design to tailor their physical properties.

The development of active and durable proton exchange membrane fuel cell catalysts with high loading (ca. 40%) is critical for the commercialization of hydrogen fuel cells. Herein we report on the synthesis of a novel Pt/C catalyst using a novel bowl-like broken hollow carbon sphere (and N doped sphere) support (carbon shell thickness ~ 4.6 nm). Highly dispersed Pt nanoparticles (dPt ~ 4 nm) were deposited on both supports and within the carbon shell. The Pt particles in the pores were exposed on both sides of the shell, while the shell porosity ensured pore confinement of the Pt. Both catalysts exhibited high electrochemical surface areas (60-65 m 2 g -1 ) and cycling durability (6000 cycles) that was superior to a commercial benchmark Pt/C catalyst. These studies indicate that high loadings of confined small Pt particles on both sides of thin interconnected carbons can lead to high oxygen reduction reaction activities and durability.

The composition of the reducing gas in the activation of Co Fischer-Tropsch synthesis catalysts determines the nature of the catalytically active Co species. This study reports on the effect of H 2 versus syngas (H 2 /CO = 2) on the reducibility of Co 3 O 4 nanoparticles supported on hollow carbon spheres, using ex situ and in situ highresolution aberration-corrected analytical electron microscopy. High-resolution images revealed twinned fcc Co particles encapsulated in carbon from syngas treatment while H 2 -treated particles were mostly CoO. Moreover, the electron energy loss of the Co-L 3,2 and O-K edge fine structures show improved reducibility in syngas than in H 2 at 350 °C. The effect of high temperature on the reducibility of the Co 3 O 4 nanoparticles is also explored. Carbon fiber encapsulation of twinned fcc Co particles observed during the syngas treatment provides sinter resistance at high temperatures. Both ex situ and in situ results indicate that syngas activation is efficient for obtaining highly reduced Co nanoparticles at lower temperatures.

The durability and long-term applicability of catalysts are critical parameters for the commercialization and adoption of fuel cells. Even though a few studies have been conducted on hollow carbon spheres (HCSs) as supports for Pt in oxygen reduction reactions (ORR) catalysis, in-depth durability studies have not been conducted thus far. In this study, Pt/HCSs and Pt/nitrogen-doped HCSs (Pt/NHCSs) were prepared using a reflux deposition technique. Small Pt particles were formed with deposition on the outside of the shell and inside the pores of the shell. The new catalysts demonstrated high activity (>380 μA cm−2 and 240 mA g−1) surpassing the commercial Pt/C by more than 10%. The catalysts demonstrated excellent durability compared to a commercial Pt/C in load cycling, experiencing less than 50% changes in the mass-specific activity (MA) and surface area-specific activity (SA). In stop-start durability cycling, the new materials demonstrated high stability with more than 50% retention of electrochemical active surface areas (ECSAs). The results can be rationalised by the high BET surface areas coupled with an array of meso and micropores that led to Pt confinement. Further, pair distribution function (PDF) analysis of the catalysts confirmed that the nitrogen and oxygen functional groups, as well as the shell curvature/roughness provided defects and nucleation sites for the deposition of the small Pt nanoparticles. The balance between graphitic and diamond-like carbon was critical for the electronic conductivity and to provide strong Pt-support anchoring.

No abstract

No abstract

The atomic arrangement of the terminating facets on spinel Co 3 O 4 nanocrystals is strongly linked to their catalytic performance. However, the spinel crystal structure offers multiple possible surface terminations depending on the synthesis. Thus, understanding the terminating surface atomic structure is essential in developing high-performance Co 3 O 4 nanocrystals. In this work, we present direct atomic-scale observation of the surface terminations of Co 3 O 4 nanoparticles supported on hollow carbon spheres (HCSs) using exit wavefunction reconstruction from aberration-corrected transmission electron microscopy focal-series. The restored high-resolution phases show distinct resolved oxygen and cobalt atomic columns. The data show that the structure of {100}, {110}, and {111} facets of spinel Co 3 O 4 exhibit characteristic active sites for carbon monoxide (CO) adsorption, in agreement with density functional theory calculations. Of these facets, the {100} and {110} surface terminations are better suited for CO adsorption than the {111}. However, the presence of oxygen on the {111} surface termination indicates this facet also plays an essential role in CO adsorption. Our results demonstrate direct evidence of the surface termination atomic structure beyond the assumed stoichiometry of the surface.