В обзоре представлены результаты, касающиеся относительно нового на-правления в физике плазменного электролиза, технологии обработки по-верхности, нанесения покрытий, процессов плазменно-электролитного на-сыщения. Обсуждаются физические и химические основы плазменного электролиза. Показано, что данным способом обработки материалов можно изменять (улучшать) физические, механические, трибологические, корро-зионные свойства изделий из металлов. Рассмотрены процессы микродуго-вого оксидирования (или плазменно-электролитного оксидирования) и при-ведены примеры его использования. Анализируются также процессы элек-тролитно-плазменной закалки приповерхностных слоев конкретных изде-лий и рассмотрены процессы диффузии, направленного массопереноса и ле-гирования поверхностных слоев металлических изделий.В огляді представлено результати, що стосуються нового напряму фізики плазмової електролізи, технології оброблення поверхні, нанесення покрит-тів, процесів плазмово-електролітичного насичування. Обговорюються фі-зичні й хемічні основи плазмової електролізи. Показано, що даним спосо-бом оброблення матеріялів можна змінювати (поліпшувати) фізичні, меха-нічні, трибологічні, корозійні властивості виробів із металів. Розглянуто процеси мікродугового оксидування (або плазмово-електролітичного окси-дування) і наведено приклади його використання. Аналізуються також процеси електролітично-плазмового гартування приповерхневих шарів конкретних виробів і розглянуто процеси дифузії, направленого масопере- Fiz. Met. 2005, т. 6, сс. 273-344 Îòòèñêè äîñòóïíû íåïîñðåäñòâåííî îò èçäàòåëÿ Ôîòîêîïèðîâàíèå ðàçðåøåíî òîëüêî â ñîîòâåòñòâèè ñ ëèöåíçèåé 2005 ÈÌÔ (Èíñòèòóò ìåòàëëîôèçèêè èì. Ã. Â. Êóðäþìîâà ÍÀÍ Óêðàèíû) Íàïå÷àòàíî â Óêðàèíå.
Представлен обзор современного состояния импульсно-плазменной детонацион-ной технологии с целью модификации свойств структуры и механических свойств, а также нанесение защитных покрытий, имеющих различные функциональные задачи. На примере простых металлов (-Fe, Cu), сталей, сплавов, включая тита-новые сплавы, показана возможность модификации поверхности с помощью воз-действия импульсной плазменной струи, имеющей высокие скорости от 1 до 8 км/с, и высокую температуру в струе (10 3 -310 4 К). Рассмотрена структура и свой-ства керамических, металлокерамических и металлических покрытий таких, как Al 2 O 3 , Al 2 O 3 Cr 2 O 3 , WC-Co, нержавеющей стали 316L, Hastelloy C на основе Ni и др. Нанесение таких защитных покрытий приводит к значительному повышению механических характеристик таких, как стойкость в эксплуатации, твердость, кор-розионная стойкость, стойкость к абразивному износу и т. д. Показано, что в неко-торых случаях необходима так называемая «дуплексная» обработка поверхности изделий из металлов и сплавов, например, вибронакатывание с последующим воз-действием импульсной плазменной струи, что приводит к заметному изменению механических характеристик изделий.Представлено огляд сучасного стану імпульсно-плазмової детонаційної технології з метою модифікації властивостей структури і механічних якостей, а також нане-сення захисних покриттів, що мають різні функціональні завдання. На прикладі простих металів (-Fe, Cu), сталей, сплавів, включаючи титанові сплави, показана можливість модифікації поверхні за допомогою дії імпульсного плазмового стру-меня, що має високі швидкості від 1 до 8 км/с, і високу температуру в струмені (10 3 -310 4 К). Розглянута структура та властивості керамічних, металокерамічних, металічних покриттів таких, як Al 2 O 3 , Al 2 O 3 Cr 2 O 3 , WC-Co, нержавіючої сталі 316L, Hastelloy C на основі Ni та ін. Нанесення таких захисних покриттів призво-дить до значного підвищення механічних характеристик таких, як стійкість в екс- Fiz. Met. 2003, т. 4, сс. A review of current state of the pulsed-plasma detonation technology, which is applied for modification of structure and mechanical properties as well as for deposition of protective coatings used to solve different functional problems, is presented. Metals (-Fe, Cu), steels, alloys (including titanium alloys) are used as examples to demonstrate the abilities of the surface modification by the pulsed-plasma jet with velocity 1-8 km/s and temperature 10 3 -310 4 K. Structure and properties of metallic and metalloceramic coatings (Al 2 O 3 Cr 2 O 3 ; WC-Co; stainless steel 316L; Hastelloy C on Ni base) are considered. Deposition of such protective coatings results in significant improvement of the mechanical characteristics as tool servicing life, hardness, corrosion resistance, abrasive wear resistance, etc. As demonstrated, in some cases for better results, the surfaces of tools made of metals and alloys should be subjected to the duplex treatment, for example, to the vibration rolling with subsequent treatment by the pulsed-plasm...
Влияние облучения электронными и ионными пучками на физико-механические свойства титановых сплавов А. Д. Погребняк, Е. А. Базыль, Н. В. СвириденкоСумский институт модификации поверхности, ул. Роменская, 87, корпус «М», а/я 163, 40030 Сумы, Украина Представлен обзор современного состояния методов обработки титана и его сплавов электронными, ионными пучками, комплексного облуче-ния. Использование такого воздействия способствует улучшению физи-ко-механических свойств материалов. Показано, что использование комплексной обработки приводит к заметному изменению механиче-ских характеристик титана и титановых сплавов.Представлено огляд сучасного стану методів обробки титану та його сплавів електронними, іонними пучками, комплексного опромінення. Використання такого впливу сприяє поліпшенню фізико-механічних властивостей матеріалів. Показано, що використання комплексної обробки приводить до значних змін механічних характеристик титану та титанових сплавів.The review of the current state of the methods applied to treat the titanium and its alloys using the electron, ion beams and their combination is presented. Application of such a treatment provides the improvement of physical and mechanical properties of these materials. As shown, the combined treatment results in the essential change of the mechanical characteristics of the titanium and its alloys.Ключевые слова: титан, титановые сплавы, метод обработки.(Получено 2 июля 2003 г.; окончат. вариант -17 декабря 2003 г.)
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.