No abstract

No abstract

The use of thermal energy storage by phase change materials (PCM) is increasing in interest for building applications. For the deployment of the technology, appropriate characterization of PCM and hybrid PCM is essential, but it is not always possible to carry it out with conventional equipment, mainly due to the sample size. This paper shows equipment developed in different research centers and universities to analyze thermophysical properties, such as specific heat, latent heat and melting temperature, and thermal conductivity and diffusivity of PCM and hybrid PCM materials.

Summary Phase change materials (PCM) have an increasingly more important role as a thermal energy storage (TES) media. However, leakage problem of PCM causes limitation during their integration in TES systems. Therefore, the encapsulation of PCMs is attracting research interest to extend usage of PCMs in real TES applications in recent years. In this study, hydroxystearic acid (HSA) was encapsulated with polymethyl methacrylate (PMMA) and different PMMA comonomer shells via emulsion polymerization method for the first time in literature. HSA with high melting temperature range (74–78°C) can widen the scope of using PCMs, and the encapsulated form can make it more versatile. The chemical structures, morphologies, and thermophysical properties of capsules were determined by FT‐IR, SEM, DSC, TGA, and thermal infrared camera. Among the produced HSA capsule candidates, PMMA‐HEMA is the most promising with latent heat of 48.5 J/g with melting range of 47 to 85°C. SEM analysis indicated that the capsules have spherical shape with compact surface at nano‐micro (100–440 nm) size range; however, some capsules exhibited agglomeration.

SUMMARYThe storage of thermal energy in phase change materials (PCMs) has found wide applications that enable energy conservation and management. Paraffin is a major PCM with its low cost, wide availability, and relatively high latent heat, yet its low thermal conductivity may become a drawback in high-power applications. In this study, composites of paraffin were prepared with multiwalled carbon nanotubes and activated carbon by a dispersion technique to overcome these drawbacks. Thermal, chemical, and physical influences of incorporating carbon additives with varying structures in paraffin composites on thermal storage capacity were determined. Results indicated that the thermal conductivities of paraffin-activated carbon composites (PACC) and paraffin multiwalled carbon nanotube composites (PCNC) were improved by a factor of 39.1 and 34.1%, respectively, compared with the conductivity of pure paraffin. As a bonus, the thermal energy storage capacities of PCNCs were enhanced by 9.6%, whereas this remained unchanged for PACCs.