Interaction between electromagnetic field (EMF) radiated from multiple antennas and human body is crucial to be explored as multiple antennas are the essential implemented devices to achieve the requirements of the future evolved fifth generation (5G) technology. Thus, this article presents a significant study of the radiated EMF effect from a single, and multiple antennas towards human through the assessment of specific absorption rate (SAR). The single antenna, 1 x 2, 1 x 3 and 1 x 4 arrays of microstrip patch antennas are designed to cover mobile operating frequencies of 0.8, 0.85, 0.9, 1.8, 2.1 and 2.6 GHz. Two types of human head phantoms are implemented in this study, which are specific anthropomorphic mannequin (SAM) and Voxel head model that placed close to single antenna or antenna array to investigate the penetration of EMF towards the human tissue. The single antenna or antenna array is placed with fixed distance of 10 mm from the phantom, which excited by maximum allowable power of 19 dBm in CST Microwave Studio 2016. The effect of the radiated EMF that quantified by SAR parameter, which depicts satisfying results against the established standard limits at averaged 1g and 10g mass of tissues for all designated frequencies that utilized for single and multiple antennas.
<span lang="EN-US">This article presents the investigation of specific absorption rate (SAR) of a rectangular-shaped planar inverted-F antenna (PIFA) at frequency of 2.6 GHz. Initially, the design antenna is presented with parametric study concerning the dimensions of antenna patch length, shorting plate, ground plane and substrate. The proposed PIFA antenna has -20.46 dB reflection coefficient and 2.383 dB gain. The PIFA’s SAR is correlated with the antenna gain and excitation power. The analysis shows that higher gain contributes to a lower SAR value. While, the higher excitation power causes a higher SAR value. All the design and analysis are performed using the CST Microwave Studio</span>
A patch antenna with rectangular-shaped ring slot that fed by a coaxial probe is proposed in this article as the single element for planar patch array antenna design to meet the requirement of multiple input multiple output (MIMO) in fifth generation (5G) technology. Initially, the single antenna element is designed at three different center frequencies of 0.85, 1.9 and 2.6 GHz to cover the mobile operating frequency of 0.8, 0.85, 0.9, 1.8, 2.1 and 2.6 GHz, which considering the proposed 5G spectrum below than 6 GHz. The rectangular-shaped ring slot is introduced to the patch antenna with the partial ground plane to widen the bandwidth performance. The designed single element is then arranged to design planar arrays of 2x2. Each of elements in the planar array is fed by a coaxial probe. The designs are utilizing a high-performance substrate, Rogers 6010LM.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.