A new class of intracellular nanoprobe, termed fluorescence resonance energy transfer (FRET) nanoflares, was developed to sense mRNA in living cells. It consists of a gold nanoparticle (AuNP), recognition sequences, and flares. Briefly, the AuNP functionalized with recognition sequences hybridized to flares, which are designed as hairpin structures and fluorescently labeled donors and acceptors at two ends, respectively. In the absence of targets, the flares are captured by binding with the recognition sequences, separating of the donor and acceptor, and inducing low FRET efficiency. However, in the presence of targets, the flares are gradually displaced from the recognition sequences by the targets, subsequently forming hairpin structures that bring the donor and acceptor into close proximity and result in high FRET efficiency. Compared to the conventional single-dye nanoflares, the upgraded FRET nanoflares can avoid false positive signals by chemical interferences (such as nuclease and GSH) and thermodynamic fluctuations. Moreover, the signal generation in FRET nanoflares can be easily made with ratiometric measurement, minimizing the effect of system fluctuations.

A new class of intracellular nanoprobe, termed AuNP loaded split-DNAzyme probe, was developed to sense miRNA in living cells. Briefly, it consists of an AuNP and substrates hybridized with two half of split DNAzymes. In the absence of target miRNA, the split DNAzymes form an inactive DNAzyme motif with their substrate through partial paring at the end of each strand, and the fluorescence is quenched. Inside the cells, the target miRNA binds with both of the two half of split DNAzymes, forming the active secondary structure in the catalytic cores, which can cleave the substrates, resulting in the rupture of the substrate and recovery of the fluorescence. Meanwhile, the target is released and binds to another inactive DNAzyme motif to drive another cycle of activation. During the cyclic process, a very small number of target miRNAs can initiate the cleavage of many fluorophore-labeled substrate strands from AuNP surface, providing an amplified fluorescent signal of the target miRNA and, thus, offering high detection sensitivity.

A new class of intracellular nanoprobe, termed AuNP-based hairpin-locked-DNAzyme probe, was developed to sense miRNA in living cells. Briefly, it consists of an AuNP and hairpin-locked-DNAzyme strands. In the absence of target miRNA, the hairpin-locked-DNAzyme strand forms a hairpin structure by intramolecular hybridization, which could inhibit the catalytic activity of DNAzyme strand and the fluorescence is quenched by the AuNP. However, in the presence of target, the target-probe hybridization can open the hairpin and form the active secondary structure in the catalytic cores to yield an "active" DNAzyme, which then cleaves the self-strand with the assist of Mg. The cleaved two shorter DNA fragments are separated with the target. As a result, the fluorophores are released from the AuNP and the fluorescence is enhanced. Meanwhile, the target is also released and binds to another hairpin-locked-DNAzyme strand to drive another cycle of activation. In such a way, the target-recycling amplification leads to significant signal enhancement and thus offers high detection sensitivity.

To date, a few of DNAzyme-based sensors have been successfully developed in living cells; however, the intracellular aptazyme sensor has remained underdeveloped. Here, the first aptazyme sensor for amplified molecular probing in living cells is developed. A gold nanoparticle (AuNP) is modified with substrate strands hybridized to aptazyme strands. Only the target molecule can activate the aptazyme and then cleave and release the fluorophore-labeled substrate strands from the AuNP, resulting in fluorescence enhancement. The process is repeated so that each copy of target can cleave multiplex fluorophore-labeled substrate strands, amplifying the fluorescence signal. Results show that the detection limit is about 200 nM, which is 2 or 3 orders of magnitude lower than that of the reported aptamer-based adenosine triphosphate (ATP) sensors used in living cells. Furthermore, it is demonstrated that the aptazyme sensor can readily enter living cells and realize intracellular target detection.

We designed a new ratiometric fluorescent nanoprobe for sensing pH values in living cells. Briefly, the nanoprobe consists of a gold nanoparticle (AuNP), short single-stranded oligonucleotides, and dual-fluorophore-labeled i-motif sequences. The short oligonucleotides are designed to bind with the i-motif sequences and immobilized on the AuNP surface via Au-S bond. At neutral pH, the dual fluorophores are separated, resulting in very low fluorescence resonance energy transfer (FRET) efficiency. At acidic pH, the i-motif strands fold into a quadruplex structure and leave the AuNP, bringing the dual fluorophores into close proximity, resulting in high FRET efficiency, which could be used as a signal for pH sensing. The nanoprobe possesses abilities of cellular transfection, enzymatic protection, fast response and quantitative pH detection. The in vitro and intracellular applications of the nanoprobe were demonstrated, which showed excellent response in the physiological pH range. Furthermore, our experimental results suggested that the nanoprobe showed excellent spatial and temporal resolution in living cells. We think that the ratiometric sensing strategy could potentially be applied to create a variety of new multicolor sensors for intracellular detection.

With the rapid development of DNA nanotechnology, various DNA nanostructures with different shapes and sizes have been self-assembled using "bottom-up" fabrication strategies and applied to a wide range of fields such as biosensors, drug delivery and tools for molecular biology. As a classical and simple polyhedron, DNA tetrahedron can be easily synthesised by a one-step assembly. Due to the excellent biocompatibility and cellular permeability, it provides a universal and promising platform to construct a series of biosensors and drug delivery systems for living cells studies. Moreover, the high programmability of DNA tetrahedron determines its capability to perform artful design and combine with other materials. Herein, we review and summarise the development and applications of DNA tetrahedron in living cell studies. We mainly focus on two parts, cellular biosensors for the detection of nucleic acids, proteins, small molecules and cancer cells and drug delivery systems for chemotherapy, immunotherapy, photodynamic therapy and gene silencing. With the rapid progress in DNA tetrahedron as well as DNA nanotechnology, new avenues and opportunities have opened up in analytical chemistry, molecular biology and medicine.

Due to its low cytotoxicity, high resistance to enzymatic degradation, and cellular permeability, a DNA tetrahedron-based molecular beacon (DTMB) is designed for tumor-related TK1 mRNA detection in living cells, where the target sequence can induce the tetrahedron from contraction to extension, resulting in fluorescence restoration.

It is of great value to detect biological molecules in live cells.However,probes for imaging low-abundance targets in live cells are limited by the one-to-one signal-triggered model. Here,weintroduce the concept of the amplified FRET nanoflare,which employs high-abundance endogenous mRNA as fuel strands to amplify the detection of lowa bundance intracellular miRNA. As far as we know,this is the first report of an endogenous mRNA-powered nanomachine for intracellular molecular detection. We experimentally prove the mechanism of the nanomachine and demonstrate its specificity and sensitivity.T he proposed amplified FRET nanoflare can act as an excellent intracellular molecular detection strategy that is promising for biological and medical applications.