No abstract

Dry reforming of methane (DRM) is becoming an appealing research topic because of the urgent need to minimize global warming and the demand for alternative energy resources. However, DRM commercialization and industrial scale application are limited by the deactivation of the applied catalysts. In this work, Ni-based catalysts supported on CeO 2 −MgO mixed oxides (0−20% CeO 2 molar content) were prepared and employed in DRM. The support was synthesized via a coprecipitation method followed by impregnation of Ni metal. The catalysts prepared were characterized by X-ray diffraction, Brunauer−Emmett−Teller (BET) analysis, temperature-programmed reduction, X-ray photoelectron spectroscopy, and field emission scanning electron microscopy (FESEM) techniques. The catalytic performance of the catalysts was evaluated in a fixed-bed continuous reactor with an equimolar (CH 4 /CO 2 ) ratio at 1073 K. The addition of CeO 2 , as a promoter to the support, altered the interaction between Ni and MgO and modulated the properties of the catalysts toward an excellent activity performance and multiwalled carbon nanotubes (MWCNTs) production. CeO 2 significantly enhanced the BET surface area, promoted Ni dispersion, and improved the reducibility of the catalyst. Among the obtained catalysts, Ni/15%CeO 2 −MgO achieved the maximum conversion of both CO 2 (95.2%) and CH 4 (93.7%) without significant deactivation during the reaction. The superior catalytic performance of the aforementioned catalyst is due to the presence of a high quantity of active Ni sites and the high Ce 3+ /Ce 4+ ratio that promoted the formation of oxygen vacancies. With the aid of temperature-programmed oxidation, FESEM, transmission electron microscopy, and Raman spectroscopy analysis, it was found that the amorphous carbon encapsulated the active sites of the catalysts, in the absence of Ce, which suppressed the syngas production significantly. The introduction of Ce not only decreased the deposited carbon but also changed the type of the later to MWCNTs, which had positive effects on the activity of the catalyst.

No abstract

No abstract

No abstract

The effects of thermal compression on the organic-soluble material of a uniform wood substrate, hybrid poplar (clone OP-367), has been studied. Poplar veneers were preconditioned to 0% or 8% moisture content and subsequently hot pressed at 150°C, 200°C, and 250°C. The dichloromethane (DCM) extracts were characterized by various hyphenated analyses [gas chromatography-mass spectrometry (GC-MS), analytical pyrolysis (Py-GC-MS), electrospray ionization-mass spectrometry (ESI-MS), and gel permeation chromatography (GPC)]. The yields and composition of extractable compounds were markedly influenced by treatment at 250°C compared to those obtained at lower temperatures. Most importantly, the organic extracts contained a significant portion of lignin-derived compounds after treatment at 250°C.

No abstract

No abstract