Abstract:In this study, oil palm mesocarp fiber (OPMF) was treated with superheated steam (SHS) in order to modify its characteristics for biocomposite applications. Treatment was conducted at temperatures 190-230 °C for 1, 2 and 3 h. SHS-treated OPMF was evaluated for its chemical composition, thermal stability, morphology and crystallinity. OPMF treated at 230 °C exhibited lower hemicellulose content (9%) compared to the OPEN ACCESSMolecules 2013, 18 9133 untreated OPMF (33%). Improved thermal stability of OPMF was found after the SHS treatment. Moreover, SEM and ICP analyses of SHS-treated OPMF showed that silica bodies were removed from OPMF after the SHS treatment. XRD results exhibited that OPMF crystallinity increased after SHS treatment, indicating tougher fiber properties. Hemicellulose removal makes the fiber surface more hydrophobic, whereby silica removal increases the surface roughness of the fiber. Overall, the results obtained herewith suggested that SHS is an effective treatment method for surface modification and subsequently improving the characteristics of the natural fiber. Most importantly, the use of novel, eco-friendly SHS may contribute to the green and sustainable treatment for surface modification of natural fiber.

No abstract

The effect of fiber surface modification by superheated steam (SHS) treatment and fiber content (30 to 50 wt.%) was evaluated relative to the mechanical, morphology, thermal, and water absorption properties of oil palm mesocarp fiber (OPMF)/polypropylene (PP) biocomposites. SHS treatment of OPMF was conducted between 190 and 230 C for 1 h, then the SHS-treated fiber was subjected to melt-blending with PP for biocomposite production. The biocomposite prepared from SHS-OPMF treated at 210 C with 30 wt.% fiber loading resulted in SHS-OPMF/PP biocomposites with a tensile strength of 20.5 MPa, 25% higher than untreated-OPMF/PP biocomposites. A significant reduction of water absorption by 31% and an improved thermal stability by 8% at T5%degradation were also recorded. Scanning electron microscopy images of fractured SHS-OPMF/PP biocomposites exhibited less fiber pull-out, indicating that SHS treatment improved interfacial adhesion between fiber and PP. The results demonstrated SHS treatment is an effective surface modification method for biocomposite production.

No abstract

No abstract

No abstract

The hybrid hydrothermal carbonization and ultrasound technology (HHTC‐Us) efficiently utilizes the function of both ultrasounds‐assisted and hydrothermal carbonization for hydrochar production. The HHTC‐Us of oil palm residues plays an essential role in hydrochar production. Hydrochar is a carbon‐rich material potentially produced from oil palm biomass, which has gained great interest due to its unique properties. Four main topics were highlighted: the production of crude palm oil and impacted biomass residue generation, properties and potential values of oil palm biomass conversion as hydrochar, hybrid hydrothermal carbonization reaction routes, and processing parameters that affect the HHTC‐Us technology. The review elucidates the promising production process or modification of hydrochar from oil palm biomass residues through hybrid technology. The technology potentially enhanced sustainability, creating challenges and new opportunities.

Pineapple leaves fibre (PALF) is one of the natural fibre that has high potential to substitute non-renewable synthetic fibre in thermoplastic products. The PALF were alkali treated with different concentrations of NaOH. Untreated and alkali treated PALF were characterized using Thermal Gravimetric Analysis (TGA) and Scanning Electron Microscopy (SEM) to determine the thermal stability and surface morphology of the fibres respectively. Biocomposites were prepared by reinforced alkali treated and untreated PALF with polypropylene (PP) matrix. Tensile properties and water absorption analysis of PALF/PP biocomposites were studied. Biocomposite with 8 wt.% of alkali treated PALF express excellent thermal stability, with maximum degradation temperature at 270 ℃ which is a 7.17% improvement compared to untreated PALF. This biocomposite also had increased tensile strength (116 MPa) with 43% improvement compared to untreated PALF/PP (66 MPa) biocomposite and had lower water absorption at 6% compared to untreated biocomposite which at 21%. Hence, alkali treated PALF is able to improve the characteristic of PALF and increase the compatibility between fibre and polymer by reducing hemicellulose and lignin components.