A key tenet of bone tissue engineering is the development of scaffold materials that can stimulate stem cell differentiation in the absence of chemical treatment to become osteoblasts without compromising material properties. At present, conventional implant materials fail owing to encapsulation by soft tissue, rather than direct bone bonding. Here, we demonstrate the use of nanoscale disorder to stimulate human mesenchymal stem cells (MSCs) to produce bone mineral in vitro, in the absence of osteogenic supplements. This approach has similar efficiency to that of cells cultured with osteogenic media. In addition, the current studies show that topographically treated MSCs have a distinct differentiation profile compared with those treated with osteogenic media, which has implications for cell therapies.

The spectroscopic analysis of large biomolecules is important in applications such as biomedical diagnostics and pathogen detection 1,2 , and spectroscopic techniques can detect such molecules at the nanogram level or lower. However, spectroscopic techniques have not been able to probe the structure of large biomolecules with similar levels of sensitivity. Here we show that superchiral electromagnetic fields 3 , generated by the optical excitation of plasmonic planar chiral metamaterials 4,5 , are highly sensitive probes of chiral supramolecular structure. The differences in the effective refractive indices of chiral samples exposed to left-and right-handed superchiral fields are found to be up to 10 6 times greater than that those observed in optical polarimetry measurements, thus allowing picogram quantities of adsorbed molecules to be characterised. The largest differences are observed for biomolecules that possess chiral planar 2 sheets, such as proteins with high β-sheet content, which suggest that this approach could form the basis for assaying technologies capable of detecting amyloid diseases and certain types of viruses.Since the building blocks of life are chiral molecular units such as amino acids and sugars, biomacromolecules formed from these units also exhibit chirality on molecular and supramolecular scales. Chirally sensitive (chiroptical) spectroscopic techniques, such as circular dichroism (CD), optical rotatory dispersion (ORD) and Raman optical activity (ROA), are therefore especially incisive probes of the threedimensional aspects of biomacromolecular structure and are widely used in biomolecular science 1,2 . Chiroptical methods typically measure small differences, or dissymmetries, in the interaction of left-and right-circularly polarised light, the chiral probe, with a chiral material 2 . However, the inherent weakness of these existing chiroptical phenomena usually restricts their application to samples of microgram level. Recently, Tang and Cohen 3 postulated that under certain circumstances superchiral electromagnetic fields could be produced that display greater chiral asymmetry than circularly polarised plane light waves. We have realised such superchiral electromagnetic fields are generated in the near fields of PCMs, and can greatly enhanced the sensitivity of a chiroptical measurement, enabling us to detect and characterise just a few picograms of a chiral material.PCMs were first fabricated, and shown to display large chiroptical effects such as optical rotation, by Schwanecke and co-workers 4 and Gonokami and co-workers 5 .The PCMs used in this study, Fig. 1 (a), are composed of left or right handed (LH / RH) Au gammadions, of length 400 nm and thickness 100 nm (plus a 5 nm Cr adhesion layer) deposited on a glass substrate and arranged in a square lattice with a periodicity of 800 nm. As a control we repeated all experiments using a metamaterial composed of achiral crosses with the same thickness and periodicity as the gammadions: these structures showed no dissymmetry in excita...

Stem cells respond to nanoscale surface features, with changes in cell growth and differentiation mediated by alterations in cell adhesion. The interaction of nanotopographical features with integrin receptors in the cells' focal adhesions alters how the cells adhere to materials surfaces, and defines cell fate through changes in both cell biochemistry and cell morphology. In this Review, we discuss how cell adhesions interact with nanotopography, and we provide insight as to how materials scientists can exploit these interactions to direct stem cell fate and to understand how the behaviour of stem cells in their niche can be controlled. We expect knowledge gained from the study of cell-nanotopography interactions to accelerate the development of next-generation stem cell culture materials and implant interfaces, and to fuel discovery of stem cell therapeutics to support regenerative therapies.

There is currently an unmet need for the supply of autologous, patient-specific stem cells for regenerative therapies in the clinic. Mesenchymal stem cell differentiation can be driven by the material/cell interface suggesting a unique strategy to manipulate stem cells in the absence of complex soluble chemistries or cellular reprogramming. However, so far the derivation and identification of surfaces that allow retention of multipotency of this key regenerative cell type have remained elusive. Adult stem cells spontaneously differentiate in culture, resulting in a rapid diminution of the multipotent cell population and their regenerative capacity. Here we identify a nanostructured surface that retains stem-cell phenotype and maintains stem-cell growth over eight weeks. Furthermore, the study implicates a role for small RNAs in repressing key cell signalling and metabolomic pathways, demonstrating the potential of surfaces as non-invasive tools with which to address the stem cell niche.

The hydrophilicity, hydrophobicity, and sliding behavior of water droplets on nanoasperities of controlled dimensions were investigated experimentally. We show that the "hemi-wicking" theory for hydrophilic SiO(2) samples successfully predicts the experimental advancing angles and that the same patterns, after silanization, become superhydrophobic in agreement with the Cassie-Baxter and Wenzel theories. Our model topographies have the same dimensional scale of some naturally occurring structures that exhibit similar wetting properties. Our results confirm that a forest of hydrophilic/hydrophobic slender pillars is the most effective superwettable/water-repellent configuration. It is shown that the shape and curvature of the edges of the asperities play an important role in determining the advancing angles.

Flash memory devices--that is, non-volatile computer storage media that can be electrically erased and reprogrammed--are vital for portable electronics, but the scaling down of metal-oxide-semiconductor (MOS) flash memory to sizes of below ten nanometres per data cell presents challenges. Molecules have been proposed to replace MOS flash memory, but they suffer from low electrical conductivity, high resistance, low device yield, and finite thermal stability, limiting their integration into current MOS technologies. Although great advances have been made in the pursuit of molecule-based flash memory, there are a number of significant barriers to the realization of devices using conventional MOS technologies. Here we show that core-shell polyoxometalate (POM) molecules can act as candidate storage nodes for MOS flash memory. Realistic, industry-standard device simulations validate our approach at the nanometre scale, where the device performance is determined mainly by the number of molecules in the storage media and not by their position. To exploit the nature of the core-shell POM clusters, we show, at both the molecular and device level, that embedding [(Se(IV)O3)2](4-) as an oxidizable dopant in the cluster core allows the oxidation of the molecule to a [Se(v)2O6](2-) moiety containing a {Se(V)-Se(V)} bond (where curly brackets indicate a moiety, not a molecule) and reveals a new 5+ oxidation state for selenium. This new oxidation state can be observed at the device level, resulting in a new type of memory, which we call 'write-once-erase'. Taken together, these results show that POMs have the potential to be used as a realistic nanoscale flash memory. Also, the configuration of the doped POM core may lead to new types of electrical behaviour. This work suggests a route to the practical integration of configurable molecules in MOS technologies as the lithographic scales approach the molecular limit.

We report a new approach for creating chiral plasmonic nanomaterials. A previously unconsidered, far-field mechanism is utilized which enables chirality to be conveyed from a surrounding chiral molecular material to a plasmonic resonance of an achiral metallic nanostructure. Our observations break a currently held preconception that optical properties of plasmonic particles can most effectively be manipulated by molecular materials through near-field effects. We show that far-field electromagnetic coupling between a localized plasmon of a nonchiral nanostructure and a surrounding chiral molecular layer can induce plasmonic chirality much more effectively (by a factor of 10(3)) than previously reported near-field phenomena. We gain insight into the mechanism by comparing our experimental results to a simple electromagnetic model which incorporates a plasmonic object coupled with a chiral molecular medium. Our work offers a new direction for the creation of hybrid molecular plasmonic nanomaterials that display significant chiroptical properties in the visible spectral region.

The effects of different poly(ethylene glycol) (PEG) attachment strategies upon the adhesion of a Gramnegative bacteria (Pseudomonas sp.) was tested. PEG was covalently immobilized, at the lower critical solution temperature of PEG, to a layer of branched poly(ethylenimine) (PEI). PEI was both physically adsorbed to a stainless-steel (SS) substrate and covalently immobilized to a carboxylated poly(ethylene terephthalate) (PET-COOH) surface. On both substrates, the PEI and PEG grafting conditions were optimized so that the levels of surface coverage after each step were maximized and were the same on both substrates, as judged by X-ray photoelectron spectroscopy and time-of-flight secondary ion mass spectrometry (ToF-SIMS). Also, ToF-SIMS imaging showed that both substrates were chemically uniform after each surface modification step. Thus, the two surfaces differ only in the mode of attachment of PEI to the substrate. In bacterial adhesion experiments, the optimal SS-PEG surface was not capable of reducing the number of adherent Pseudomonas sp. when compared to the controls. However, the PET-PEG surface reduced the level of adhesion by between 2 and 4 orders of magnitude for up to 5 h. ToF-SIMS analysis showed that both PEG surfaces adsorbed low but comparable levels of proteinaceous growth medium components (tryptic soy broth), as indicated by the addition of unique amino acid fragment ions in the spectra, most likely small peptides. Thus, bacterial adhesion was strongly dependent on the PEG immobilization strategy and not on the extent of peptide/protein adsorption. However, for the best PEG surfaces the residual bacterial adhesion is most likely from recognition of the small amount of adsorbed peptides. This highlights the necessity for preventing the adsorption of small biological species that can even penetrate PEG layers of high graft density, in the quest for the ultimate "nonfouling" surface.