The hydrophilicity, hydrophobicity, and sliding behavior of water droplets on nanoasperities of controlled dimensions were investigated experimentally. We show that the "hemi-wicking" theory for hydrophilic SiO(2) samples successfully predicts the experimental advancing angles and that the same patterns, after silanization, become superhydrophobic in agreement with the Cassie-Baxter and Wenzel theories. Our model topographies have the same dimensional scale of some naturally occurring structures that exhibit similar wetting properties. Our results confirm that a forest of hydrophilic/hydrophobic slender pillars is the most effective superwettable/water-repellent configuration. It is shown that the shape and curvature of the edges of the asperities play an important role in determining the advancing angles.

Thermal energy can be effectively converted into electricity using pyroelectrics, which act as small scale power generator and energy harvesters providing nanowatts to milliwatts of electrical power. In this paper, a novel pyroelectric harvester based on free-standing poly(vinylidene difluoride) (PVDF) was manufactured that exploits the high thermal radiation absorbance of a screen printed graphene ink electrode structure to facilitate the conversion of the available thermal radiation energy into electrical energy. The use of interconnected graphene nanoplatelets (GNPs) as an electrode enable high thermal radiation absorbance and high electrical conductivity along with the ease of deposition using a screen print technique. For the asymmetric structure, the pyroelectric open-circuit voltage and closed-circuit current were measured, and the harvested electrical energy was stored in an external capacitor. For the graphene ink/PVDF/aluminum system the closed circuit pyroelectric current improves by 7.5 times, the open circuit voltage by 3.4 times, and the harvested energy by 25 times compared to a standard aluminum/PVDF/aluminum system electrode design, with a peak energy density of 1.13 μJ/cm. For the pyroelectric device employed in this work, a complete manufacturing process and device characterization of these structures are reported along with the thermal conductivity of the graphene ink. The material combination presented here provides a new approach for delivering smart materials and structures, wireless technologies, and Internet of Things (IoT) devices.

No abstract

A biodegradable substrate with a regular array of nanopillars fabricated by electron-beam lithography and hot embossing is used to address the mechanisms of nanotopographical control of cell behavior. Two different cell lines cultured on the nanopillars show striking differences in cell coverage. These changes are topography- and cell-dependent, and are not mediated by air bubbles trapped on the nanopattern. For the first time, a strong cell-selective effect of the same nanotopography has been clearly demonstrated on a large area; while fibroblast proliferation is inhibited, endothelial cell spreading is visibly enhanced. The reduced fibroblast proliferation indicates that a reduction of available surface area induced by nanotopography might be the main factor affecting cell growth on nanopatterns. The results presented herein pave the way towards the development of permanent vascular replacements, where non-adhesive, inert, surfaces will induce rapid in situ endothelialization to reduce thrombosis and occlusion.

No abstract

Mesenchymal stem cells are sensitive to changes in feature height, order and spacing. We had previously noted that there was an inverse relationship between osteoinductive potential and feature height on 15-, 55- and 90 nm-high titania nanopillars, with 15 nm-high pillars being the most effective substrate at inducing osteogenesis of human mesenchymal stem cells. The osteoinductive effect was somewhat diminished by decreasing the feature height to 8 nm, however, which suggested that there was a cut-off point, potentially associated with a change in cell–nanofeature interactions. To investigate this further, in this study, a scanning electron microscopy/three-dimensional scanning electron microscopy approach was used to examine the interactions between mesenchymal stem cells and the 8 and 15 nm nanopillared surfaces. As expected, the cells adopted a predominantly filopodial mode of interaction with the 15 nm-high pillars. Interestingly, fine nanoscale membrane projections, which we have termed ‘nanopodia,’ were also employed by the cells on the 8 nm pillars, and it seems that this is analogous to the cells ‘clinging on with their fingertips’ to this scale of features.

This review discusses some of the most common polymer scaffold fabrication techniques used for tissue engineering applications. Although the field of scaffold fabrication is now well established and advancing at a fast rate, more progress remains to be made, especially in engineering small diameter blood vessels and providing scaffolds that can support deep tissue structures. With this in mind, we introduce two new lithographic methods that we expect to go some way to addressing this problem.

The occurrence of air-trapping inside poly-eta-caprolactone nanopits was investigated by measuring the contact angles of water droplets on a set of defined nanotopographies. It is shown that the advancing angles follow the Cassie-Baxter theory, thus revealing the presence of air bubbles inside the biodegradable nanopatterns. The importance of these observations for the definition of hydrophilicity/hydrophobicity and in the context of in vitro cell behavior is discussed.