The aim of this study was to determine the effect of employee workload and stress on the production process at PT X palm oil mill with a capacity of 600 tons/day. The process in this palm oil mill are broadly divided into 6 parts through several processing stations namely reception, treshing, stirring and pressing, clarification and nut and kernel stations. Work activities carried out with a standing attitude for a long time, monotonous, exposed to noise from production machines and the number of extra hours will have an impact on workload and work stress felt by employees. This study uses multiple linear regression analysis with 32 respondents. The results showed that workload and work stress simultaneously had a positive and significant effect on employee performance. Partially the workload has a positive and significant effect, while work stress does not significantly influence the performance of employee.
Catalysts properties are important for catalytic reactions. The interaction between support and metal in a catalyst is resulted from catalyst preparation. In this study, gamma-alumina (Al2O3) supported cobalt (Co) and chromium (Cr) catalysts were prepared by impregnation method and calcined at two different temperatures, they are 400 °C for 4 hours and 800 °C for 4 hours. The resulted catalysts contained 10 wt.% of metal and denoted as Co/Al2O3(400), Co/Al2O33(800), Cr/Al2O3(400), and Cr/Al2O3(800) catalysts. The surface and state of the catalysts were examined by using x-ray diffraction (XRD), x-ray photoelectron spectrometer (XPS) and transmission electron microscopy (TEM). The XRD result reveals that strong interaction between Co and Al2O3 due to a formation of higher cobalt oxide. The XRD result further indicates aggregation and strong support metal interaction between Co and Al2O3 during calcination. On the other hand, TEM result showed that large Co particle was observed on Al2O3. The Cr/Al2O3 catalysts were characterized by using XPS. The XPS results showed that Cr/Al2O3(800) catalyst was dominated by Cr 6+ species at binding energy 579.04 eV, indicating high dispersion of Cr on Al2O3. Moreover, Cr metal particle was not observed on XRD and TEM image. All the characterization results provide information that the impregnated metal on Al2O3 showed different properties. Co metal particle tends to be more oxidized and formed large particle, however it was not observed on Cr metal particle.A catalyst contains two or more important compositions; they are a metal, a promoter, and a support. The metal is usually dispersed on a support to obtain a high surface area of an active metal. The catalytic property of the metal mainly depends on the interaction between metal and support. Therefore, metal-support interaction is important for the final catalysts properties. Some supports such as alumina (Al2O3),
Penelitian ini bertujuan untuk memilih rute optimal pengangkutan sampah pada UKM Kelompok Usaha Bersama Peduli Sampah Kecamatan Tanah Abang sehingga dapat meminimalkan biaya transportasi. Metode Branch and Bound dan Nearest Neighbour dipilih dalam menyelesaikan masalah pada penelitian ini. Metode Branch and Bound adalah metode pencarian di dalam ruang solusi secara sistematis. Sedangkan metode Nearest Neighbour adalah sebuah teknik menyelesaikan permasalahan rute dengan menentukan titik terdekat dengan jarak terpendek. Hasil perhitungan untuk rute awal pengangkutan sampah didapatkan jarak tempuh per tahun sebesar 5.356,8Km, waktu tempuh per tahun sebesar 12.480 Menit dan biaya transportasi per tahun sebesar Rp.11.584.793,6. Dari hasil penelitian menggunakan metode Branch and Bound didapat jarak tempuh per tahun sebesar 4.454,4 Km, waktu tempuh per tahun sebesar 10.560 Menit dan biaya transportasi per tahun sebesar Rp.9.641.548,8. Dengan metode Nearest Neighbor didapat jarak tempuh per tahun sebesar 4.454,4 Km, waktu tempuh per tahun sebesar 10.368 Menit dan biaya transportasi per tahun sebesar Rp.9.641.548,8. Perbandiangan antara kedua metode tersebut menghasilkan jarak tempuh dan biaya transportasi yang sama, tetapi terdapat perbedaan pada waktu tempuh. Metode Nearest Neighbour memiliki waktu tempuh yang lebih cepat sehingga metode ini terpilih untuk mencapai tujuan penelitian.
Risiko kecelakaan kerja merupahal hal yang tak dapat dihindari dari kegiatan proyek pembangunan. PT Gran Anugerah Wijaya merupakan pengusaha pengembang perumahan yang sedang mengerjakan proyek pembangunanan 58 unit rumah tipe 36 yang berlokasi di daerah Palembang. Dari hasil pengamatan lapangan, alur proses pembangunan rumah yang dikerjakan meliputi pemasangan pondasi, pemasangan dinding, pemasangan kusen kayu, pemasangan rangka atap dan finishing. Hazard Identification, Risk Assessment dan Risk Control telah dilakukan dlaam penelitian ini. Hasil yang didapat bahwa terdapat 27 potensi risiko dengan risk level diantara rendah hinggi tinggi. Pengendalian risiko yang bisa dilakaukan untuk mengurangi bahaya kerja terhadap karyawan bangunan diantaranya substitusi, administrasi dan Alat Pelindung Diri (APD).
Aktivitas pengangkatan dan penurunan buah kelapa sawit merupakan aktivitas yang memiliki risiko cidera yang tinggi dengan berat beban tertentu, secara terus menerus dapat menyebabkan penyakit ataupun cedera tulang bagian belakang, terlebih jika pekerjaan tersebut dilakukan dengan tidak benar. Aktivitas ini merupakan pekerjaan yang sangat berbahaya, sehingga kemungkinan pekerja mengalami keluhan muskuloskeletal. Penelitian ini bertujuan untuk mengukur serta mengetahui postur kerja pekerja. Pengukuran dilakukan pada tubuh bagian atas dan tubuh bagian bawah. Metode yang digunakan dalam penelitian ini yaitu Rapid Uper Limb Assessment (RULA) dan Rapid Entire Body Assessment (REBA). Hasil pengukuran didapat skor rata-rata Rapid Uper Limb Assessment (RULA) yaitu 5 termasuk kedalam Action List 3 dengan risiko sedang dan menunjukkan bahwa penyelidikan dan perubahan dibutuhkan segera. Hasil pengukuran Rapid Entire Body Assessment (REBA) didapat skor rata-rata yaitu 11 termasuk kedalam Action List 4 dengan level risiko sangat tinggi dan tindakan perbaikan perlu saat ini juga. Usulan perbaikan yang efektif yaitu berupa rekomendasi alat bantu katrol.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.