The synthesis and structure of a new flexible metal-organic framework Ni(2)(2,6-ndc)(2)(dabco) (DUT-8(Ni), DUT = Dresden University of Technology, 2,6-ndc = 2,6-naphthalenedicarboxylate, dabco = 1,4-diazabicyclo[2.2.2]octane) as well as its characterization by gas adsorption and (129)Xe NMR spectroscopy is described. The compound shows reversible structural transformation without loss of crystallinity upon solvent removal and physisorption of several gases. Xenon adsorption studies combined with (129)Xe NMR spectroscopy turn out to be favorable methods for the detection and characterization of the so-called "gate-pressure" effect in this novel MOF material. The linewidth and chemical shift of the (129)Xe NMR signal are shown to be very sensitive parameters for the detection of this structural transition from a narrow pore system with low porosity to a wide pore state. The transition and threshold temperature is clearly detected.

The synthesis and structural flexibility of the metal-organic frameworks M 2 (2,6-ndc) 2 (dabco) (DUT-8(M), M ¼ Ni, Co, Cu, Zn; 2,6-ndc ¼ 2,6-naphthalenedicarboxylate, dabco ¼ 1,4-diazabicyclo[2.2.2] octane) as well as their characterization by gas adsorption, 129 Xe NMR and 13 C MAS NMR spectroscopy are described. Depending on the integrated metal atom the compounds show reversible (DUT-8(Ni), DUT-8(Co)), non-reversible (DUT-8(Zn)) or no (DUT-8(Cu)) structural transformation upon solvent removal and/or physisorption of several gases. DUT-8(Co) exhibits a similar structural transformation by solvent removal and adsorption behavior as observed for DUT-8(Ni). DUT-8(Zn) undergoes an irreversible structural change caused by solvent removal. The non-flexible copper containing MOF reveals the best performance concerning porosity and gas storage capacities within the DUT-8 series. Xenon adsorption studies combined with 129 Xe NMR spectroscopy are used to study the flexibility of the DUT-8 compounds. 129 Xe chemical shift and line width strongly depend on the metal atom. Solid-state 13 C NMR spectroscopy has been applied in order to further characterize the organic parts of the DUT-8 frameworks. While DUT-8(Ni) exhibits narrow, well-resolved lines in its ''as made'' state, the signals of are broadened and shifted over an unusually wide chemical shift range (À72 to 717 ppm). No detectable signals are found in DUT-8(Cu) indicating significantly changed internal dynamics compared to and .

The quest for advanced designer adsorbents for air filtration and monitoring hazardous trace gases has recently been more and more driven by the need to ensure clean air in indoor, outdoor, and industrial environments. How to increase safety with regard to personal protection in the event of hazardous gas exposure is a critical question for an ever-growing population spending most of their lifetime indoors, but is also crucial for the chemical industry in order to protect future generations of employees from potential hazards. Metal-organic frameworks (MOFs) are already quite advanced and promising in terms of capacity and specific affinity to overcome limitations of current adsorbent materials for trace and toxic gas adsorption. Due to their advantageous features (e.g., high specific surface area, catalytic activity, tailorable pore sizes, structural diversity, and range of chemical and physical properties), MOFs offer a high potential as adsorbents for air filtration and monitoring of hazardous trace gases. Three advanced topics are considered here, in applying MOFs for selective adsorption: (i) toxic gas adsorption toward filtration for respiratory protection as well as indoor and cabin air, (ii) enrichment of hazardous gases using MOFs, and (iii) MOFs as sensors for toxic trace gases and explosives.

No abstract

The "gate opening" mechanism in the highly flexible MOF Ni2(2,6-ndc)2dabco (DUT-8(Ni), DUT = Dresden University of Technology) with unprecedented unit cell volume change was elucidated in detail using combined single crystal X-ray diffraction, in situ XRD and EXAFS techniques. The analysis of the crystal structures of closed pore (cp) and large pore (lp) phases reveals a drastic and unique unit cell volume expansion of up to 254%, caused by adsorption of gases, surpassing other gas-pressure switchable MOFs significantly. To a certain extent, the structural deformation is specific for the guest molecule triggering the transformation due to subtle differences in adsorption enthalpy, shape, and kinetic diameter of the guest. Combined adsorption and powder diffraction experiments using nitrogen (77 K), carbon dioxide (195 K), and n-butane (272.5 K) as a probe molecules reveal a one-step structural transformation from cp to lp. In contrast, adsorption of ethane (185 K) or ethylene (169 K) results in a two-step transformation with the formation of intermediate phases. In situ EXAFS during nitrogen adsorption was used for the first time to monitor the local coordination geometry of the metal atoms during the structural transformation in flexible MOFs revealing a unique local deformation of the nickel-based paddle-wheel node.